Sony Ericsson Headphones Bluetooth Enabled Hands Free Kit Headset User Manual

OPERATI NG MANUAL  
Bluetooth Enabled Hands-Free Kit /  
Headset  
Version 3.0  
 
C. OPERATI ONS  
Before use, the headset must be paired with the phone. Pairing is done only once. After being  
paired, the phone and the headset will be automatically connected anytime when the phone is  
used. (Please see Headset Operations for Popular Cell Phones section on page 4 for instructions.)  
D. I NSTALLI NG THE MI CROPHONE  
1.  
Put two (2) "AAA" Alkaline batteries in the wireless microphone. The negative polarity of the  
batteries must be in the spring side.  
Note: Microphone battery life is more than 500 calls (if 3 calls/day, battery life = more than 5  
months).  
It is highly recommended that you attach your microphone to the sun visor. Please make sure  
that it does not hide the microphone otherwise your voice will be attenuated.  
Turn "ON" the microphone by using the power switch.  
2.  
3.  
REMARKS:  
If microphone is not “ON” during the communication, the sound on the speaker will be  
attenuated.  
In standby mode, the microphone will still have  
microwatts).  
a
small consumption (less the 1.8  
On some versions the indicator light will only turn ON for 2 seconds after the microphone is  
switched ON. If the light is red, this indicates low battery.  
The microphone is activated by the Hands-Free Kit base and can remain in “ON” position  
even if not used, but in order to extend your battery life, it is recommended to switch “OFF”  
your microphone when not using for a long time.  
E. FUNCTI ON CONTROLS  
Adjust the Function Controls as recommended:  
1.  
2.  
3.  
Tone Control  
“H” for High Tone  
“L” for Low Tone.  
ASP Control  
ON  
=
Echo and Feedback Canceller  
OFF = Echo Reducer only  
Adjustable Microphone Gain (MIC) Control  
“H” for high gain; “L” for low gain.  
"L" is necessary in noisy background.  
Control Switches  
The Microphone gain must be adjusted to match with your cell phone model. If the gain is too high,  
it can cause feedback (whistling sound), echo or background noise during calls on some cell  
phones.  
RecommendedFunctionControls  
Setting(Workingonall models):  
Note :  
On high background environment,  
If you experience audio level  
fluctuation, turn ASP ‘’ OFF ’’.  
MIC  
=
=
=
L
ON  
H
ASP  
TONE  
F. SETTI NG THE VOLUME  
There are two volume controls on the unit. One is on the main unit which is the speaker volume  
(10) and controls only the main speaker (6). The other is on the headset which is the multi-function  
button (8) and sets both the earphone (11) and the main speaker (6).  
2
 
The headset volume control is digital and is combined with the multi-function button (8). Pressing it  
clockwise increases the volume. Counter-clockwise decreases it. Continuous pressing of the  
digital volume control can also rapidly set the volume. (Please refer to the Headset Operations for  
Popular Cell Phones section on page 4 for additional information.)  
During a communication, pick-up the earphone and adjust it’s volume (8). Replace the earphone on  
the base and adjust the speaker volume (10).  
If the volume is too high, it can cause feedback (whistling sound), echo or background noise during  
calls on some cell phones.  
G. ANSW ERI NG/ RECEI VI NG A CALL  
When the phone is receiving a call, the phone ring tone will be heard on the hands-free kit or on  
the headset. Just press button (4) on the main unit, or button (8) on the headset once to answer  
the call. Pressing the button again will hang-up and terminates the call. (Please refer to the  
Headset Operations for Popular Cell Phones section on page 4 for additional information.)  
H. MAKI NG A CALL  
Calling through the hands-free kit can be done using voice tags (refer to the Headset Operations  
for Popular Cell Phones section on page 4 for saving and activating voice tags). The steps are:  
1.  
Press the line pick-up button (4) once on the main unit or the multi-function button (8) to  
activate the voice dialing.  
2.  
3.  
4.  
A beep will then be heard prompting the user to say the name of the person to call.  
Say the name. The name will be played back to you.  
The phone will then place the call automatically. In case the phone does not recognize  
the name spoken, the steps above may be repeated.  
Press the button again to terminate the call.  
5.  
If the desired number to be dialed has no voice tag, normal dialing can also be done using the  
keypad on the phone. (Please refer to the Headset Operations for Popular Cell Phones section on  
page 4 for additional information.)  
Important Remark:  
On some versions of Nokia’s software, the headset/car kit will not connect automatically to the cell  
phone. You will need to press the multi-function button once to connect it to the cell phone.  
3
 
HEADSET OPERATIONS FOR POPULAR  
CELL PHONES  
Note 1: If your phone is not included on the following list of this manual, kindly refer to the manual of your  
phone.  
Note 2: Softwares and menus could be modified by the cell phone’s manufacturers without prior notice. If the  
manual does not match with your cell phone operations, kindly refer to the manual of your cell phone.  
Sony Ericsson T68/T68i  
a.  
b.  
c.  
d.  
e.  
f.  
Activating the Bluetooth  
Pairing to the Cellular Phone  
Answering/Receiving a Call  
Making a Call with the headset on  
Rejecting a Call  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
6
6
6
6
7
7
7
7
Setting the Volume  
g.  
h.  
Activating the Voice Dialing  
Recording for Voice Dialing  
Sony Ericsson T39m  
a.  
b.  
c.  
d.  
e.  
f.  
Activating the Bluetooth  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
8
8
8
8
8
9
9
Pairing to the Cellular Phone  
Answering/Receiving a Call  
Making a Call with the headset on  
Setting the Volume  
Activating the Voice Dialing  
Recording for Voice Dialing  
g.  
Sony Ericsson P800  
a.  
b.  
c.  
d.  
e.  
f.  
Activating the Bluetooth  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
9
Pairing to the Cellular Phone  
Answering/Receiving a Call  
Making a Call with the headset on  
Setting the Volume  
Activating the Voice Dialing  
Recording for Voice Dialing  
9
9
10  
10  
10  
10  
g.  
Sony Ericsson T610  
a.  
b.  
c.  
d.  
e.  
f.  
Activating the Bluetooth  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
10  
10  
11  
11  
11  
11  
11  
11  
Pairing to the Cellular Phone  
Answering/Receiving a Call  
Making a Call with the headset on  
Rejecting a Call  
Setting the Volume  
g.  
h.  
Activating the Voice Dialing  
Recording for Voice Dialing  
Nokia 6310/6310i  
a.  
b.  
c.  
d.  
e.  
f.  
Activating the Bluetooth  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
12  
12  
12  
12  
12  
13  
13  
13  
Pairing to the Cellular Phone  
Auto Accept Mode  
Answering/Receiving a Call  
Making a Call with the headset on  
Rejecting a Call  
g.  
h.  
Setting the Volume  
Recording for Voice Dialing  
Nokia 8910  
a.  
b.  
c.  
d.  
e.  
Activating the Bluetooth  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
13  
13  
14  
14  
14  
Pairing to the Cellular Phone  
Auto Accept Mode  
Answering/Receiving a Call  
Making a Call with the headset on  
4
 
f.  
g.  
h.  
Rejecting a Call  
Setting the Volume  
Recording for Voice Dialing  
…………………………………………  
…………………………………………  
…………………………………………  
14  
14  
15  
Nokia 8910i  
a.  
b.  
c.  
d.  
e.  
f.  
Activating the Bluetooth  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
15  
15  
15  
16  
16  
16  
16  
16  
Pairing to the Cellular Phone  
Auto Accept Mode  
Answering/Receiving a Call  
Making a Call with the headset on  
Rejecting a Call  
g.  
h.  
Setting the Volume  
Recording for Voice Dialing  
Nokia 3650  
a.  
b.  
c.  
d.  
e.  
f.  
Activating the Bluetooth  
Pairing to the Cellular Phone  
Auto Accept Mode  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
16  
17  
17  
17  
17  
18  
18  
18  
Answering/Receiving a Call  
Making a Call with the headset on  
Rejecting a Call  
g.  
h.  
Setting the Volume  
Recording for Voice Dialing  
Siemens S55  
a.  
b.  
c.  
d.  
e.  
f.  
Activating the Bluetooth  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
…………………………………………  
18  
18  
19  
19  
19  
19  
19  
Pairing to the Cellular Phone  
Answering/Receiving a Call  
Making a Call with the headset on  
Rejecting a Call  
Setting the Volume  
g.  
Recording for Voice Dialing  
Suggested Pairing Modes  
Pairing Mode  
Headset Handsfree  
Cell Phone Models  
Ericsson T68  
Ericsson T68i (R6 and below)  
Ericsson T68i (R7)  
Ericsson T39m  
Ericsson P800  
Ericsson T610  
Nokia 6310/6310i  
Nokia 8910  
Nokia 8910i  
Nokia 3650  
Siemens S55  
5
 
USING WITH SONY ERICSSON T68/T68i  
a.  
ACTIVATING THE BLUETOOTH  
You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone  
and other Bluetooth devices.  
1.  
Go the Menu Key by pressing the joystick. Scroll to Connect, YES. Select Bluetooth, YES.  
Select Options, YES. Operation mode, YES. On, YES.  
Continue pressing NO, to exit.  
2.  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Connect  
Bluetooth  
3
4 (or 3 for T68i R7)  
Options  
Operation mode  
T68  
T68i  
8
8
-
4
2
1
b.  
PAIRING TO THE CELLULAR PHONE  
1.  
2.  
3.  
4.  
Bring the cellular phone at about 20 cm from the headset.  
Detach the headset from the holster/base.  
Turn off the headset.  
From the OFF state, press the multi-function button for 10 seconds or until a distinctive three-  
tone sound will be heard and at the same time the red and blue indicator will alternately blink.  
This indicates that the unit is now ready for pairing. For T68 and T68i older versions, R6 and  
below, press the multi-function button again (headset mode).  
5.  
6.  
Go the Menu Key by pressing the joystick. Scroll to Connect, YES. Select Bluetooth, YES.  
Select Paired devices, YES. Add device, YES. Choose Phone initiates, YES. Choose  
Headset/Handsfree, YES. The phone will then search the device to be added. After the  
device is found, press YES.  
QUICK ACCESS (for steps 5 and 6):  
Press Menu then follow the sequence of numbers below:  
Paired  
Add  
device  
Yes  
Phone  
Headset/  
Connect  
Bluetooth  
devices  
initiates  
Handsfree  
T68  
8
8
3
2
2
1
1
2
2
T68i  
4 (or 3 for T68i R7)  
Yes  
7.  
Enter “0000” as the passkey. If the pairing is successful, the alternating red/blue lights will  
stop. Press YES to confirm the name of the device. If the pairing is unsuccessful, the steps  
above may be repeated.  
8.  
Continue pressing NO to exit the menu key.  
The unit is now ready to link calls from the phone directly to the headset. An icon, will appear  
during the standby mode indicating that the headset is linked with the phone.  
c.  
d.  
ANSWERING/RECEIVING A CALL  
When the phone is receiving a call, a ring tone will be heard on the headset.  
1.  
Just press the multi-function button down once to answer the call. Pressing the button again  
will hang-up and terminate the call.  
If you wish to answer a call on the cellular phone, just press YES and the call is automatically  
transferred to the phone. Pressing the multi-function button transfers the call on the headset.  
2.  
To terminate the call, press the multi-function button again.  
MAKING A CALL with the headset on  
Normal dialing  
1.  
Enter the contact number and press YES. Audio can be heard on the headset at the  
same time, a question will be displayed. Retrieve call in phone?, ignoring or pressing  
No, transfers the call to the headset. Pressing Yes, transfers the call to the cell phone.  
Press the multi-function button to hang-up and terminate the call.  
2.  
Voice dialing  
Refer to step f and g for the procedure when activating and recording for voice dialing.  
1.  
2.  
Press the multi-function button once to activate the voice dialing.  
A beep will then be heard on the headset prompting the user to say the name of the  
person to call.  
3.  
Say the name. The name will be played back to you. The phone will then place the call  
automatically. In case the cell phone does not recognize the name spoken, the steps  
above may be repeated.  
4.  
Press the button again to terminate the call.  
6
 
Redialing  
For T68i R6 and R7, press the multi-function button twice. Call is automatically transferred on  
the headset.  
e.  
f.  
REJECTING A CALL  
For T68i R6 and R7, press the multi-function button twice to reject the incoming call.  
SETTING THE VOLUME  
The headset has a digital volume control and is combined with the multi-function button. Setting  
the volume can be done during calls only.  
1.  
2.  
Press it clockwise to increase the volume.  
Decreases the volume by pressing it counter-clockwise.  
Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too  
high, it can cause feedback (whistling sound), echo or background noise during calls on some cell  
phones.  
Note: Volume keys of the cellular phone can also be used to set the volume.  
g.  
ACTIVATING THE VOICE DIALING  
Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the  
name dialing function and record your voice. To turn voice dialing on and record number types:  
Using T68 Sony Ericsson  
1.  
Go to the Menu Key by pressing the joystick. Scroll to Settings, YES. Voice control,  
YES.  
2.  
3.  
Voice settings, YES. Voice dialing, YES. Select On, YES.  
Continue pressing NO to exit  
Using T68i Sony Ericsson  
1.  
Go to the Menu Key by pressing the joystick. Scroll to Settings, YES. Voice control,  
YES. Voice dialing, YES.  
Select On, YES.  
Continue pressing NO to exit  
2.  
3.  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Voice  
control  
Voice  
settings  
Voice  
dialing  
Settings  
On  
T68  
T68i  
5
5
8
6
1
-
1
1
1
1
h.  
RECORDING FOR VOICE DIALING  
Using T68 Sony Ericsson  
1.  
2.  
3.  
Go to the Menu Key by pressing the joystick. Scroll to Settings and press YES. Choose  
Voice control, YES. Voice Commands, YES. Select a contact, YES. Add voice, YES.  
Follow the instructions in the display. An icon will appear next to a contact name which  
has a voice command.  
Continue pressing NO to exit.  
Using T68i Sony Ericsson  
1.  
Go to the Menu Key by pressing the joystick. Scroll to Settings and press YES. Choose  
Voice control, YES then go to Voice dialing, YES. Edit name, YES. Add voice, YES.  
Select a contact, YES.  
Follow the instructions in the display. An icon will appear next to a contact name which  
has a voice command.  
Continue pressing NO to exit.  
2.  
3.  
4.  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Settings  
Voice control  
Voice commands  
Contacts  
T68  
5
Settings  
5
8
2
4
Voice control  
Voice dialing  
Edit names  
T68i  
6
1
2
Note: Record your voice command in a quiet place so that only your voice will be recorded on  
the phone.  
7
 
USING WITH SONY ERICSSON T39m  
a.  
ACTIVATING THE BLUETOOTH  
You must activate your Bluetooth to establish a Bluetooth connection between  
your mobile phone and other Bluetooth devices.  
1.  
Press the Menu Key. Scroll to Extras and press YES. Select Operation mode, YES. On,  
YES.  
2.  
Continue pressing NO, to exit.  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Extras  
5
Bluetooth  
Operation mode  
T39m  
6
4
b.  
PAIRING TO THE CELLULAR PHONE  
1.  
2.  
3.  
4.  
Bring the cellular phone at about 20 cm from the headset.  
Detach the headset from the holster/base.  
Turn off the headset.  
From the OFF state, press the multi-function button for 10 seconds or until a distinctive three-  
tone sound will be heard and at the same time the red and blue indicator will alternately blink.  
Press the multi-function button once (headset mode). This indicates that the unit is now ready  
for pairing.  
Press the Menu Key. Scroll to Extras, YES. Select Bluetooth, YES. Select Paired devices,  
YES. Add device, YES. Choose Phone initiates, YES. Choose Headset, YES. The phone will  
then search the device to be added. After the device is found, press YES.  
QUICK ACCESS (for steps 5 and 6):  
5.  
Press Menu then follow the sequence of numbers below:  
Paired  
devices  
2
Add  
device  
Yes  
Phone  
initiates  
1
Extras  
Bluetooth  
Headset  
T39m  
5
6
2
6.  
Enter “0000” as the passkey. If the pairing is successful, the alternating red/blue lights will  
stop. Press YES to confirm the name of the device. If the pairing is unsuccessful, the steps  
above may be repeated.  
7.  
Continue pressing NO to exit the menu key.  
The unit is now ready to link calls from the phone directly to the headset.  
c.  
d.  
ANSWERING/RECEIVING A CALL  
When the phone is receiving a call, a ring tone will be heard on the headset.  
1.  
2.  
3.  
Just press the multi-function button down once to answer the call. Pressing the button again  
will hang-up and terminate the call.  
If you wish to answer a call on the cellular phone, just press YES and the call is automatically  
transferred to the phone. Pressing the multi-function button transfers the call on the headset.  
To terminate the call, press the multi-function button again.  
MAKING A CALL with the headset on  
Normal dialing  
1.  
Enter the contact number and press YES. Audio can be heard on the headset at the  
same time, a question will be displayed. Retrieve call in phone?, ignoring or pressing  
No, transfers the call to the headset. Pressing Yes, transfers the call to the cell phone.  
Press the multi-function button to hang-up and terminate the call.  
2.  
Voice dialing  
Refer to step f and g for the procedure when activating and recording for voice dialing.  
1.  
2.  
Press the multi-function button once to activate the voice dialing.  
A beep will then be heard on the headset prompting the user to say the name of the  
person to call.  
3.  
Say the name. The name will be played back to you. The phone will then place the call  
automatically. In case the cell phone does not recognize the name spoken, the steps  
above may be repeated.  
4.  
Press the button again to terminate the call.  
e.  
SETTING THE VOLUME  
The headset has a digital volume control and is combined with the multi-function button. Setting  
the volume can be done during calls only.  
1.  
2.  
Press it clockwise to increase the volume.  
Decreases the volume by pressing it counter-clockwise.  
8
 
Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too  
high, it can cause feedback (whistling sound), echo or background noise during calls on some cell  
phones.  
f.  
ACTIVATING THE VOICE DIALING  
Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on  
the name dialing function and record your voice. To turn voice dialing on and record number types:  
1.  
2.  
3.  
Press the Menu Key. Scroll to Settings, YES. Voice control, YES.  
Voice settings, YES. Voice dialing, YES. Select On, YES.  
Continue pressing NO to exit  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Settings  
Voice control  
Voice settings  
Voice dialing  
On  
1
T39m  
4
9
1
1
g.  
RECORDING FOR VOICE DIALING  
1.  
2.  
3.  
Press the Menu Key. Scroll to Settings, YES. Voice control, YES. Voice Commands, YES.  
Select Contacts, YES. Add voice, YES.  
Find a contact name and follow the instructions in the display. An icon will appear next to a  
contact name which has a voice command.  
Continue pressing NO to exit.  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Settings  
Voice control  
Voice commands  
Contacts  
T39m  
4
9
2
4
Note: Noisy environment may affect voice recognition. Record your voice in a quiet environment.  
USING WITH SONY ERICSSON P800  
a.  
b.  
ACTIVATING THE BLUETOOTH  
You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone  
and other Bluetooth devices.  
1.  
On the Applications window (flip open mode), scroll and tap Contol Panel using the stylus.  
Go to Connections. Tap Bluetooth. Go to Settings. On the Operation mode, tap On.  
2.  
Tap  
to exit and return to the Applications window.  
PAIRING TO THE CELLULAR PHONE  
1.  
2.  
3.  
4.  
Bring the cellular phone at about 20 cm from the headset.  
Detach the headset from the holster/base.  
Turn off the headset.  
From the OFF state, press the multi-function button for 10 seconds or until a distinctive three-  
tone sound will be heard and at the same time the red and blue indicator will alternately blink.  
Press the multi-function button once (headset mode). This indicates that the unit is now ready  
for pairing.  
5.  
On the Applications window (flip open mode), scroll and tap Control Panel.. Go to  
Connections. Tap Bluetooth. Bluetooth devices is displayed as sub-title. Tap Add. The phone  
is now searching for pairable devices.  
6.  
7.  
Tap the device you want to pair with. Bonding in progress will be displayed on screen. The  
phone will then ask for the pass key.  
Tap  
on the lower left corner of the screen. Enter “0000” as the passkey and tap Done.  
Tap Done under the sub-title, “Secure Connection.” If the pairing is successful, the alternating  
red/blue lights will stop.  
8.  
Tap  
to exit and return to the Applications mode. If the pairing is unsuccessful, the steps  
above may be repeated.  
The unit is now ready to link calls from the phone directly to the headset. An icon will appear  
during the standby mode indicating that the headset is linked with the phone.  
c.  
ANSWERING/RECEIVING A CALL  
When the phone is receiving a call, a ring tone will be heard on the headset.  
1.  
Just press the multi-function button down once to answer the call. Pressing the button again  
will hang-up and terminate the call.  
If you wish to answer a call on the cellular phone, just press YES and the call is automatically  
transferred to the phone. Pressing the multi-function button transfers the call on the headset.  
2.  
To terminate the call, press the multi-function button again.  
9
 
d.  
MAKING A CALL with the headset on  
Normal dialing  
1.  
Enter the contact number and press OK. Sound is automatically transferred to the  
headset.  
2.  
Press the multi-function button to hang-up and terminate the call.  
Voice dialing  
Refer to step f and g for the procedure when activating and recording for voice dialing.  
1.  
2.  
3.  
Press the multi-function button once to activate the voice dialing. Sound is  
automatically transferred to the headset.  
A beep will then be heard on the headset prompting the user to say the name of the  
person to call.  
Say the name. The name will be played back to you. The phone will then place the call  
automatically. In case the cell phone does not recognize the name spoken, the steps  
above may be repeated.  
4.  
Press the button again to terminate the call.  
e.  
SETTING THE VOLUME  
The headset has a digital volume control and is combined with the multi-function button. Setting  
the volume can be done during calls only.  
1.  
2.  
Press it clockwise to increase the volume.  
Decreases the volume by pressing it counter-clockwise.  
Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too  
high, it can cause feedback (whistling sound), echo or background noise during calls on some cell  
phones.  
f.  
ACTIVATING THE VOICE DIALING  
Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the  
name dialing function and record your voice. To turn voice dialing on:  
1.  
2.  
3.  
On the Applications window (flip open mode), tap Phone.  
Tap Edit then tap Preferences. A list of features will appear.  
Tap Voice Control then tap the box aligned to Voice dialing to check and activate the voice  
dialing feature. Tap the box aligned to Play caller name so that the name will be played back  
to you.  
4.  
5.  
6.  
Tap Done on the on screen button when finished.  
On the Preferences mode, tap Done again.  
Tap  
to exit and return to the Applications mode.  
g.  
RECORDING FOR VOICE DIALING  
The voice dialing feature is only applicable to contacts saved to phone memory.  
1.  
2.  
On the Applications window (flip open mode), tap Contacts.  
Tap the contact where you want to add a voice dialing feature. Tap Edit. Scroll to Edit  
Contact. Tap  
on the on-screen buttons.  
3.  
4.  
Tap Record. Speak after tone will be displayed on the screen.  
Record your voice. To check if your recording is of good quality, tap Play. If not, tap Record  
again. Press Done when finished.  
5.  
Tap  
to make another record and repeat the steps above. To return to the Applications  
button.  
window, tap  
Note: Noisy environment may affect voice recognition. Record your voice in a quiet environment.  
USING WITH SONY ERICSSON T610  
a.  
b.  
ACTIVATING THE BLUETOOTH  
You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone  
and other Bluetooth devices.  
1.  
Go the Menu Key by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth,  
SELECT. Turn On, SELECT.  
2.  
Continue pressing  
, to exit.  
PAIRING TO THE CELLULAR PHONE  
1.  
2.  
3.  
4.  
Bring the cellular phone at about 20 cm from the car kit.  
Detach the headset from the holster/base.  
Turn off the headset.  
From the OFF state, press the multi-function button for 10 seconds or until a distinctive three-  
tone sound will be heard and at the same time the red and blue indicator will alternately blink.  
This indicates that the unit is now ready for pairing.  
10  
 
5.  
6.  
7.  
8.  
Go the Menu Key by pressing the joystick. Scroll to Connectivity, SELECT. Select Bluetooth,  
SELECT.  
Scroll to My devices, SELECT. New device, ADD. The phone is now searching for pairable  
devices to be added. Select the device you want to pair with your cell phone. Press SELECT.  
Enter “0000” as the passkey then press OK. If the pairing is successful, the alternating  
red/blue lights will stop.  
Continue pressing  
to exit the menu key.  
The unit is now ready to link calls from the phone directly to the car kit. An icon, will appear during  
the standby mode indicating that the car kit is linked with the phone.  
c.  
d.  
ANSWERING/RECEIVING A CALL  
When the phone is receiving a call, a ring tone will be heard on the car kit.  
1.  
2.  
3.  
Just press the multi-function button down once to answer the call. Pressing the button again  
will hang-up and terminate the call.  
If you wish to answer a call on the cellular phone, just press YES and the call is automatically  
transferred to the phone. Pressing the multi-function button transfers the call on the car kit.  
To terminate the call, press the multi-function button again.  
MAKING A CALL with the headset on  
Normal dialing  
1.  
Enter the contact number and press CALL button. Audio is automatically transferred to  
the car kit.  
2.  
Press the multi-function button to hang-up and terminate the call.  
Voice dialing  
Refer to step e and f for the procedure when activating and recording for voice dialing.  
1.  
2.  
Press the multi-function button once to activate the voice dialing.  
A beep will then be heard on the car kit prompting the user to say the name of the  
person to call.  
3.  
Say the name. The name will be played back to you. The phone will then place the call  
automatically. In case the cell phone does not recognize the name spoken, the steps  
above may be repeated.  
4.  
Press the multi-function button again to terminate the call.  
e.  
f.  
REJECTING A CALL  
Press the multi-function button twice to reject the incoming call.  
SETTING THE VOLUME  
The headset has a digital volume control and is combined with the multi-function button. Setting  
the volume can be done during calls only.  
1.  
2.  
Press it clockwise to increase the volume.  
Decreases the volume by pressing it counter-clockwise.  
Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too  
high, it can cause feedback (whistling sound), echo or background noise during calls on some cell  
phones.  
g.  
h.  
ACTIVATING THE VOICE DIALING  
Use your phone when recording for the voice dialing. Before voice dialing, you must first turn on the  
name dialing function and record your voice. To turn voice dialing on and record number types:  
1.  
Go to the Menu Key by pressing the joystick. Scroll to Settings, SELECT. Voice control,  
SELECT. Voice dialing, SELECT.  
2. Choose On, SELECT.  
3. Continue pressing  
to exit.  
RECORDING FOR VOICE DIALING  
1.  
Go to the Menu Key by pressing the joystick. Scroll to Settings and press SELECT. Choose  
Voice control, SELECT then go to Voice dialing, SELECT. Edit name, SELECT. New voice,  
ADD.  
2.  
3.  
Find a contact then press SELECT.  
Follow the instructions that is displayed. Voice is automatically saved on the phone. An icon  
will appear next to a contact name which has a voice command.  
4.  
Continue pressing  
to exit.  
Note: Noisy environment may affect voice recognition. Record your voice in a quiet environment.  
11  
 
USING WITH NOKIA 6310/6310i  
a.  
ACTIVATING THE BLUETOOTH  
You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone  
and other Bluetooth devices.  
1.  
2.  
3.  
Press the Menu button. Scroll to Bluetooth, SELECT. Press SELECT again.  
Choose On, SELECT. An icon will appear on the upper left corner.  
Press Back then Exit to exit the Menu.  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Bluetooth  
Select  
1
1
On  
1
1
Select  
1
1
6310  
6310i  
10  
11  
b.  
PAIRING TO THE CELLULAR PHONE  
1.  
2.  
3.  
4.  
Bring the cellular phone at about 20 cm from the headset.  
Detach the headset from the holster/base.  
Turn off the headset.  
From the OFF state, press the multi-function button for 10 seconds or until a distinctive three-  
tone sound will be heard and at the same time the red and blue indicator will alternately blink.  
This indicates that the headset is now ready for pairing.  
5.  
Press the Menu button. Scroll to Bluetooth, SELECT. Scroll to Search for audio accessories,  
SELECT. The phone is now scanning for Bluetooth devices. SELECT the headset. The  
phone will initiate connection with the headset.  
QUICK ACCESS (for step 5):  
Press Menu followed by the sequence of numbers below.  
Bluetooth  
Search for audio accessories  
6310  
6310i  
10  
11  
2
2
6.  
7.  
Enter “0000” as the passcode then press OK. The phone is now connected with the headset.  
Press Back then Exit to exit the Menu.  
The headset is paired and ready to use. An icon will be displayed during the standby mode  
indicating that the headset is linked with the phone.  
Note: Once paired, the headset and the phone have simultaneous connection with each other  
(keypad tones can be heard on the headset every time the keypad is pressed).  
c.  
AUTO ACCEPT MODE  
The auto accept mode allows the Bluetooth function to be turned on automatically whenever the  
user starts sending information such as answering or making a call via the Bluetooth headset.  
1.  
2.  
3.  
Press the Menu button. Scroll to Bluetooth, SELECT. Scroll to View paired  
devices, SELECT.  
Select the headset and press OPTIONS. Scroll to Request conn. authorisation, SELECT. No,  
SELECT.  
Continue pressing Back button to exit the Menu.  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Bluetooth  
View paired devices  
Select  
Options  
Options  
6310  
6310i  
10  
11  
4
4
d.  
e.  
ANSWERING/RECEIVING A CALL  
When the phone is receiving a call, a ring tone will be heard on the headset as well as on the  
phone.  
1.  
2.  
Press the multi-function button down once to answer the call.  
End the call by pressing the button again.  
Note: Cell phone buttons can also be used to answer a call but audio is still transferred to the  
headset.  
MAKING A CALL with the headset on  
Normal dialing  
1.  
Enter the contact number and send. As you dial, audio and the keypad tones can be  
heard on the headset simultaneously but not on the phone.  
12  
 
2.  
Press the multi-function button to hang-up and terminate the call.  
Note: If the call is terminated using the cellular phone, a tone will be heard on the headset  
indicating that the call has been terminated.  
Voice dialing  
Refer to step g for the procedure when recording for voice dialing.  
1.  
2.  
Press the multi-function button once to activate the voice dialing.  
A beep will then be heard on the headset prompting the user to say the name of the  
person to call.  
3.  
Say the name. The name will be played back to you. The phone will then place the call  
automatically. In case the cellular phone does not recognize the name spoken, the  
steps above may be repeated.  
4.  
Press the button again to terminate the call.  
Redialing  
Press quickly the multi-function button twice to redial the last number.  
f.  
REJECTING A CALL  
Press the multi-function button twice to reject the incoming call.  
g.  
SETTING THE VOLUME  
The headset has a digital volume control and is combined with the multi-function button. Setting the  
volume can be done during calls or every time a key is pressed on your cell phone.  
1.  
2.  
Press it clockwise to increase the volume.  
Decrease the volume by pressing it counter-clockwise.  
As you press the button, the volume level is simultaneously displayed on the cellular phone.  
Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too  
high, it can cause feedback (whistling sound), echo or background noise during calls.  
Note: It is also possible to use the volume keys of the cellular phone to set the volume.  
h.  
RECORDING FOR VOICE DIALING  
Use your phone when recording voice dialing.  
1.  
2.  
3.  
Press the Names button. Search, SELECT. Press List button.  
Find a contact name. Press Details button.  
Press Options button. Add voice tag, SELECT. Instructions appear. Your voice is  
automatically saved on the phone after being played back to you.  
In case you wish to change your recorded voice, press Options button. Voice tags, SELECT.  
Change, SELECT. Instructions appear.  
4.  
5.  
Continue pressing Back button to exit.  
Note: Record your voice command in a quiet place so that only your voice will be recorded on the  
phone.  
USING WITH NOKIA 8910  
a.  
ACTIVATING THE BLUETOOTH  
You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone  
and other Bluetooth devices.  
1.  
2.  
3.  
Press Menu. Scroll to Bluetooth, SELECT. Press SELECT again.  
Choose On, SELECT. An icon will appear on the upper left corner.  
Press Back then Exit to exit the Menu.  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Bluetooth  
Select  
1
On  
1
Select  
1
8910  
10  
b.  
PAIRING TO THE CELLULAR PHONE  
1.  
2.  
3.  
4.  
Bring the cellular phone at about 20 cm from the headset.  
Detach the headset from the holster/base.  
Turn off the headset.  
From the OFF state, press the multi-function button for 10 seconds or until a  
distinctive  
three-tone sound will be heard and at the same time the red and blue indicator will alternately  
blink. This indicates that the headset is now ready for pairing.  
13  
 
5.  
Press Menu. Scroll to Bluetooth, SELECT and Search for audio accessories, SELECT. The  
phone is now scanning for Bluetooth devices. SELECT the headset. The phone will initiate  
connection with the headset.  
QUICK ACCESS (for step 5):  
Press Menu followed by the sequence of numbers below.  
Bluetooth  
Search for audio accessories  
8910  
10  
2
6.  
Enter “0000” as the passcode then press OK. The volume level will be displayed. The phone  
is now connected with the headset.  
Press Back then Exit to exit the Menu.  
7.  
The headset is paired and ready to use. An icon will be displayed during the standby mode  
indicating that the headset is linked with the phone.  
Note: Once paired, the headset and the phone have simultaneous connection with each other  
(keypad tones can be heard on the headset every time the keypad is pressed).  
c.  
AUTO ACCEPT MODE  
The auto accept mode allows the Bluetooth function to be turned on automatically whenever the  
user starts sending information such as answering or making a call via the Bluetooth headset.  
1.  
2.  
Press Menu. Scroll to Bluetooth, SELECT. Scroll to View paired devices, SELECT.  
Select the headset and press OPTIONS. Scroll to Request conn. authorisation, SELECT. No,  
SELECT.  
3.  
Continue pressing Back button to exit the Menu.  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Bluetooth  
View paired devices  
Select  
Options  
8910  
10  
4
d.  
e.  
ANSWERING/RECEIVING A CALL  
When the phone is receiving a call, a ring tone will be heard on the headset as well as on the  
phone.  
1.  
2.  
Press the multi-function button down once to answer the call.  
End the call by pressing the button again.  
Note: Cell phone buttons can also be used to answer a call but audio is still transferred to the headset.  
MAKING A CALL with the headset on  
Normal dialing  
1.  
Enter the contact number and send. As you dial, audio and the keypad tones can be  
heard on the headset simultaneously but not on the phone.  
Press the multi-function button to hang-up and terminate the call.  
2.  
Note: If the call is terminated using the cellular phone, a tone will be heard on the headset  
indicating that the call has been terminated.  
Voice dialing  
Refer to step g for the procedure when recording for voice dialing.  
1.  
2.  
Press the multi-function button once to activate the voice dialing.  
A beep will then be heard on the headset prompting the user to say the name of the  
person to call.  
3.  
Say the name. The name will be played back to you. The phone will then place the call  
automatically. In case the cellular phone does not recognize the name spoken, the  
steps above may be repeated.  
4.  
Press the button again to terminate the call.  
Redialing  
Press quickly the multi-function button twice to redial the last number.  
f.  
REJECTING A CALL  
Press the multi-function button twice to reject the incoming call.  
g.  
SETTING THE VOLUME  
The headset has a digital volume control and is combined with the multi-function button. Setting the  
volume can be done during calls or every time a key is pressed on your cell phone.  
1.  
2.  
Press it clockwise to increase the volume.  
Decrease the volume by pressing it counter-clockwise.  
14  
 
As you press the button, the volume level is simultaneously displayed on the cellular phone.  
Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too  
high, it can cause feedback (whistling sound), echo or background noise during calls.  
Note: It is also possible to use the volume keys of the cellular phone to set the volume by pressing  
the multifunction button first.  
h.  
RECORDING FOR VOICE DIALING  
Use your phone when recording voice dialing.  
1.  
2.  
From standby mode, press arrow up or down.  
Find a contact name to which you want to add a voice tag. Press Details button. The phone  
number will be displayed.  
3.  
4.  
Press Options button. Add voice tag, SELECT. Press Start, and say the name clearly. Voice  
tag saved is displayed indicating that the voice tag has been saved.  
In case you wish to change your recorded voice, press Names, Voice tags, SELECT. Scroll  
to the name whom you want to change the voice tag then press Options. Change, SELECT.  
Follow the instructions.  
5.  
Continue pressing Back button to exit.  
Note: Noisy environment could affect voice recognition. Record voice in a quiet environment.  
USING WITH NOKIA 8910i  
a.  
ACTIVATING THE BLUETOOTH  
You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone  
and other Bluetooth devices.  
1.  
2.  
3.  
Press Menu. Scroll to Connectivity, SELECT. Bluetooth, SELECT.  
Choose On, SELECT. An icon will appear on the display on the standby mode.  
Continue pressing Back button to exit the Menu.  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Connectivity  
Bluetooth  
Select  
On  
Select  
8910i  
10  
1
1
1
1
b.  
PAIRING TO THE CELLULAR PHONE  
1.  
2.  
3.  
4.  
Bring the cellular phone at about 20 cm from the headset.  
Detach the headset from the holster/base.  
Turn off the headset.  
From the OFF state, press the multi-function button for 10 seconds or until a  
distinctive  
three-tone sound will be heard and at the same time the red and blue indicator will alternately  
blink. This indicates that the headset is now ready for pairing.  
Press Menu. Scroll to Connectivity, SELECT. Bluetooth, SELECT and scroll to Search for  
audio accessories, SELECT. The phone is now searching for Bluetooth devices. SELECT  
the headset. The phone will initiate connection with the headset.  
QUICK ACCESS (for step 5):  
Press Menu followed by the sequence of numbers below.  
5.  
Connectivity  
Bluetooth  
Search for audio accessories  
8910i  
10  
1
2
6.  
7.  
Enter “0000” as the passcode then press OK. The phone is now connected with the headset.  
Continue pressing the Back button to exit the Menu.  
The headset is paired and ready to use. An icon will be displayed during the standby mode  
indicating that the headset is linked with the phone.  
Note: Once paired, the headset and the phone have simultaneous connection with each other  
(keypad tones can be heard on the headset every time the keypad is pressed).  
c.  
AUTO ACCEPT MODE  
The auto accept mode allows the Bluetooth function to be turned on automatically whenever the  
user starts sending information such as answering or making a call via the Bluetooth headset.  
1.  
2.  
3.  
Press Menu. Scroll to Connectivity, SELECT. Bluetooth, SELECT. Scroll to View paired  
devices, SELECT.  
Select the headset and press OPTIONS. Scroll to Request conn. authorisation, SELECT. No,  
SELECT.  
Continue pressing Back button to exit the Menu.  
15  
 
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below.  
Connectivity  
Bluetooth  
View paired devices  
Select  
8910i  
10  
1
4
Options  
d.  
e.  
ANSWERING/RECEIVING A CALL  
When the phone is receiving a call, a ring tone will be heard on the headset as well as on the  
phone.  
1.  
2.  
Press the multi-function button down once to answer the call.  
End the call by pressing the button again.  
Note: Cell phone buttons can also be used to answer a call but audio is still transferred to the headset.  
MAKING A CALL with the headset on  
Normal dialing  
1.  
Enter the contact number and send. As you dial, audio and the keypad tones can be  
heard on the headset simultaneously but not on the phone.  
Press the multi-function button to hang-up and terminate the call.  
2.  
Note: If the call is terminated using the cellular phone, a tone will be heard on the headset  
indicating that the call has been terminated.  
Voice dialing  
Refer to step g for the procedure when recording for voice dialing.  
1.  
2.  
Press the multi-function button once to activate the voice dialing.  
A beep will then be heard on the headset prompting the user to say the name of the  
person to call.  
3.  
Say the name. The name will be played back to you. The phone will then place the call  
automatically. In case the cellular phone does not recognize the name spoken, the  
steps above may be repeated.  
4.  
Press the button again to terminate the call.  
Redialing  
Press quickly the multi-function button twice to redial the last number.  
f.  
REJECTING A CALL  
Press the multi-function button twice to reject the incoming call.  
g.  
SETTING THE VOLUME  
The headset has a digital volume control and is combined with the multi-function button. Setting the  
volume can be done during calls or every time a key is pressed on your cell phone.  
1.  
2.  
Press it clockwise to increase the volume.  
Decrease the volume by pressing it counter-clockwise.  
As you press the button, the volume level is simultaneously displayed on the cellular phone.  
Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too  
high, it can cause feedback (whistling sound), echo or background noise during calls.  
Note: It is also possible to use the volume keys of the cellular phone to set the volume by pressing  
the multifunction button first.  
h.  
RECORDING FOR VOICE DIALING  
Use your phone when recording voice dialing.  
1.  
2.  
From standby mode, press arrow up or down.  
Find a contact name to which you want to add a voice tag. Press Details button. The phone  
number will be displayed.  
3.  
4.  
Press Options button. Add voice tag, SELECT. Press Start, and say the name clearly. Voice  
tag saved is displayed indicating that the voice tag has been saved.  
In case you wish to change your recorded voice, press Names, Voice tags, SELECT. Scroll  
to the name whom you want to change the voice tag then press Options. Change, SELECT.  
Follow the instructions.  
5.  
Continue pressing Back button to exit.  
Note: Noisy environment could affect voice recognition. Record voice in a quiet environment.  
USING WITH NOKIA 3650  
a.  
ACTIVATING THE BLUETOOTH  
You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone  
and other Bluetooth devices.  
16  
 
1.  
Press the Menu  
button. Scroll to Connect., OPTIONS. A list of options will be displayed.  
Choose OPEN then press SELECT. Choose Bluetooth, OPTIONS. Choose OPEN, and  
press SELECT.  
2.  
3.  
Bluetooth  
press OK.  
OFF  
will be displayed. Press OPTIONS. Change, SELECT. Choose On, then  
Continue pressing Exit key to exit the Menu.  
b.  
PAIRING TO THE CELLULAR PHONE  
1.  
2.  
3.  
4.  
Bring the cellular phone at about 20 cm from the headset.  
Detach the headset from the holster/base.  
Turn off the headset.  
From the OFF state, press the multi-function button for 10 seconds or until a distinctive three-  
tone sound will be heard and at the same time the red and blue indicator will alternately blink.  
This indicates that the headset is now ready for pairing.  
5.  
Press the Menu  
button. Scroll to Connect., OPTIONS. Choose Open, press SELECT.  
button, “Paired devices” will be displayed  
Bluetooth, OPTIONS. Open, SELECT. Press  
as title. Press OPTIONS. New paired device, SELECT. “Searching for devices…” will be  
displayed. Select the headset and press SELECT. “Waiting for…” and “Passcode for…” will  
be displayed simultaneously.  
Enter “0000” as the passcode then press OK. “Waiting for…” and “Pairing with…complete”  
will be displayed simultaneously.  
Continue pressing Exit key to exit the Menu.  
6.  
7.  
The headset is paired and ready to use. An icon will be displayed during the standby mode  
indicating that the headset is linked with the phone.  
Note: Once paired, press the multi-function button once to establish simultaneous connection  
between the headset and the phone (keypad tones can be heard on the headset every time the  
keypad is pressed). If ever the paired device was deleted and turned off, once it is turned on, there  
is no need to undergo the same pairing procedure. “Passcode for…” will be displayed. Enter the  
passcode then press OK. “Accept connection request from…” press YES to reconnect.  
c.  
AUTO ACCEPT MODE  
The auto accept mode allows the Bluetooth function to be turned on automatically whenever the  
user starts sending information such as answering or making a call via the Bluetooth headset.  
1.  
Press the Menu  
button. Scroll to Connect., OPTIONS. Choose Open, press SELECT.  
Bluetooth, OPTIONS. Open, SELECT. Press  
button. “Paired devices” will be displayed  
as title.  
2.  
3.  
Select the headset and press OPTIONS. Scroll to Set as authorised, SELECT. “Connections  
will take place without confirmation. Continue?” press YES.  
Continue pressing Exit key to exit the Menu. An icon will then appear on the upper right  
corner.  
d.  
e.  
ANSWERING/RECEIVING A CALL  
When the phone is receiving a call, a ring tone will be heard on the headset as well as on the  
phone.  
1.  
2.  
Press the multi-function button down once to answer the call.  
End the call by pressing the button again.  
Note: Cell phone buttons can also be used to answer a call but audio is still transferred to the  
headset.  
MAKING A CALL with the headset on  
Normal dialing  
1.  
Enter the contact number and send. As you dial, audio and the keypad tones can be  
heard on the headset simultaneously but not on the phone.  
Press the multi-function button to hang-up and terminate the call.  
2.  
Note: If the call is terminated using the cellular phone, a tone will be heard on the headset  
indicating that the call has been terminated.  
Voice dialing  
Refer to step g for the procedure when recording for voice dialing.  
1.  
2.  
Press the multi-function button once to activate the voice dialing.  
A beep will then be heard on the headset prompting the user to say the name of the  
person to call.  
Say the name. The name will be played back to you. The phone will then place the call  
automatically. In case the cellular phone does not recognize the name spoken, the  
steps above may be repeated.  
3.  
17  
 
4.  
Press the button again to terminate the call.  
Redialing  
Press quickly the multi-function button twice to redial the last number.  
f.  
REJECTING A CALL  
Press the multi-function button twice to reject the incoming call.  
g.  
SETTING THE VOLUME  
The headset has a digital volume control and is combined with the multi-function button. Setting the  
volume can be done during calls or every time a key is pressed on your cell phone.  
1.  
2.  
Press it clockwise to increase the volume.  
Decrease the volume by pressing it counter-clockwise.  
As you press the button, the volume level is simultaneously displayed on the cellular phone.  
Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too  
high, it can cause feedback (whistling sound), echo or background noise during calls.  
Note: It is also possible to use the volume keys of the cellular phone to set the volume.  
h.  
RECORDING FOR VOICE DIALING  
Use your phone when recording voice dialing.  
1.  
2.  
3.  
Press the Menu  
button. Select Contacts, OPTIONS. Open, SELECT.  
button. (The contact number is the one being displayed.)  
Find a contact name. Press  
Press Options button. Scroll to Add Voice tag, SELECT. Instructions appear. Your voice is  
automatically saved on the phone after being played back to you.  
In case you wish to change your recorded voice, press Options button. Voice tag, SELECT.  
Change, SELECT. Instructions appear.  
4.  
5.  
Continue pressing Exit key to exit the Menu.  
Note: Record your voice command in a quiet place so that only your voice will be recorded on the  
phone.  
USING WITH SIEMENS S55  
a.  
ACTIVATING THE BLUETOOTH  
You must activate your Bluetooth to establish a Bluetooth connection between your mobile phone  
and other Bluetooth devices.  
1.  
2.  
Press the Menu button. Scroll to Setup, SELECT. Choose Connectivity, SELECT.  
Scroll to Bluetooth, Change. The phone is now connecting with the Bluetooth device. An icon  
will appear on the upper left corner when connected. OPTIONS button may also be pressed.  
Choose Activate BT, then SELECT.  
3.  
Continue pressing the On/Off/End Key to exit the Menu.  
QUICK ACCESS:  
Press Menu followed by the sequence of numbers below. Doing this sequence once will either  
activate or deactivate the Bluetooth depending on your current setting.  
Setup  
9
Connectivity  
Bluetooth  
6
4
b.  
PAIRING TO THE CELLULAR PHONE  
1.  
2.  
3.  
4.  
Bring the cellular phone at about 20 cm from the headset.  
Detach the headset from the holster/base.  
Turn off the headset.  
From the OFF state, press the multi-function button for 10 seconds or until a distinctive three-  
tone sound will be heard and at the same time the red and blue indicator will alternately blink.  
This indicates that the headset is now ready for pairing.  
Press the Menu button. Scroll to Setup, SELECT. Choose Connectivity, SELECT. Scroll to  
Bluetooth, OPTIONS. Scroll to Search for…, press ACCESS button. The phone is now  
searching for devices. When the search is complete, Devices disc. is displayed as title. If the  
device you are looking for is not on the list, repeat the procedure by pressing the OPTIONS  
and REPEAT buttons. Then press SELECT to add the device. The phone will initiate  
connection with the headset.  
5.  
6.  
Pls, enter BT pin for…, OK. Enter “0000” as the BT pin then press OK. Handsfree trusted will  
be displayed afterwards indicating that the pairing is completed.  
7.  
Continue pressing the On/Off/End Key to exit the Menu.  
The headset is paired and ready to use. An icon will be displayed during the standby mode  
indicating that the headset is linked with the phone.  
18  
 
c.  
d.  
ANSWERING/RECEIVING A CALL  
When the phone is receiving a call, a ring tone will be heard from the phone.  
1.  
2.  
Press the multi-function button down once to answer the call.  
End the call by pressing the button again.  
Note: Cell phone buttons can also be used to answer a call. To transfer the call to the headset,  
press the multi-function button once.  
MAKING A CALL with the headset on  
Normal dialing  
1.  
Enter the contact number and send. To transfer audio on the headset, press the multi-  
function button once.  
Press the multi-function button again to hang-up and terminate the call.  
2.  
Note: If the call is terminated using the cellular phone, no tone will be heard on the headset  
indicating that the call has been terminated.  
Voice dialing  
Refer to step f for the procedure when recording for voice dialing.  
1.  
2.  
Press the multi-function button once to activate the voice dialing.  
A beep will then be heard on the headset prompting the user to say the name of the  
person to call.  
3.  
Say the name. The name will be played back to you. The phone will then place the call  
automatically. In case the cellular phone does not recognize the name spoken, the  
steps above may be repeated.  
4.  
Press the button again to terminate the call.  
Redialing  
Pressing quickly the multi-function button twice triggers the cell phone to redial the last  
number. Call is automatically transferred on the headset.  
e.  
f.  
REJECTING THE CALL  
Press the multi-function button twice to reject the incoming call.  
SETTING THE VOLUME  
The headset has a digital volume control and is combined with the multi-function button. Setting the  
volume can be done during calls only.  
1.  
2.  
Press it clockwise to increase the volume.  
Decrease the volume by pressing it counter-clockwise.  
Continuous pressing of the digital volume control can rapidly set the volume. If the volume is too  
high, it can cause feedback (whistling sound), echo or background noise during calls.  
Note: It is also possible to use the volume keys of the cellular phone to set the volume. As you  
press it, the volume level is simultaneously displayed on the cellular phone.  
g.  
RECORDING FOR VOICE DIALING  
Use your phone when recording for voice dialing. Record your contact names and numbers in the  
“Address book” (phone memory).  
1.  
From standby mode, open the Address book by pressing the arrow down key . . (If Phone  
book is the one displayed, press  
key to switch to Address book.)  
2.  
3.  
Select a contact name. OPTIONS.  
Scroll to Voice dialing, SELECT. New, SELECT. Recording for: contact name, YES. Follow  
the instructions. Your voice is automatically saved on the phone after being played back to  
you.  
4.  
5.  
In case you wish to change your recorded voice, press Options button. Voice tags, SELECT.  
Change, SELECT. Instructions appear.  
Press On/Off/End key to exit  
Note: Noisy environment may affect voice recognition. Record your voice in a quiet place.  
Hereby, Euro Communication Equipements sas, declares that this radio equipment is in compliance with  
the essential requirements and other relevant provisions of Directive 1999/5/EC.  
This equipment can be used in all European countries. An individual license is required in Romania.  
19  
 

Sennheiser Microphone 835 FX User Manual
Sennheiser Microphone COM 1905 User Manual
Shure Microphone SM94 User Manual
Sony Camera Accessories RML1AM User Manual
Sony Computer Drive DRX S70U W User Manual
Spin Master Cassette Player 09002 User Manual
Sterling Plumbing Outdoor Shower 72230106 User Manual
Subaru Automobile Parts EH650VC0120 User Manual
Sunbeam Microwave Oven SBMW1049SS User Manual
Sylvania TV VCR Combo SSC091 User Manual