4-180-168-11(1)
Setting Up
LCD
Watching TV
Digital Colour TV
Operating Instructions
Additional Information
KDL-40EX43B / KDL-32EX43B
Table of Contents
Checking the accessories..............................................................................................................3
Connecting an antenna (aerial)/Set Top Box/recorder (e.g. DVD recorder)..................................4
Organising the AC power cord (mains lead)..................................................................................5
Troubleshooting ...........................................................................................................................10
Specifications...............................................................................................................................11
Safety Information........................................................................................................................16
Precautions..................................................................................................................................17
Safety information about built-in BD player..................................................................................18
Precautions about built-in BD player............................................................................................18
• Operating instructions are built into your BRAVIA TV. Refer to “To use i-Manual” for operation (page 8).
• Before operating the TV, please read “Safety Information” (page 16). Retain this manual for future reference.
Checking the accessories
Remote (1)
Inserting batteries into the
remote
Size AAA batteries (R3 type) (2)
Table-Top Stand (1)*
Push and lift the cover to open.
Fixing screws for Table-Top Stand
(M5 × 16) (4)
Assembling screws for Table-Top Stand
(M5 × 16) (4)
* Assemble the Table-Top Stand with the supplied
assembling screws. Refer to the supplied Table-
Top Stand leaflet to assemble the stand.
3GB
Setting Up
Attaching the Table-Top
Stand
Connecting an antenna
(aerial)/Set Top Box/
recorder (e.g. DVD recorder)
1 Refer to the supplied Table-Top Stand
leaflet for proper attachment for some
TV models.
Connecting a Set Top Box/recorder
(e.g. DVD recorder) with SCART
2 Place the TV set on the Table-Top
Stand.
3 Fix the TV to the Table-Top Stand
according to the arrow marks that
guide the screw holes using the
supplied screws.
Set Top Box/recorder (e.g. DVD recorder)
Connecting a Set Top Box/recorder
(e.g. DVD recorder) with HDMI
~
• If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
IN
1
ARC
Set Top Box/recorder (e.g. DVD recorder)
4GB
Preventing the TV from
toppling over
Organising the AC power
cord (mains lead)
1 Install a wood screw (4 mm in
diameter, not supplied) in the TV stand.
2 Install a machine screw (M4 × 16, not
supplied) into the screw hole of the TV.
3 Tie the wood screw and the machine
screw with a strong cord (not supplied).
5GB
Performing the initial set-up
Detaching the Table-Top
Stand from the TV
~
• Remove the screws guided by the arrow marks
of the TV.
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
1 Connect the TV to your AC power
outlet (mains socket).
2 Press 1 on the TV.
When you switch on the TV for the first
time, the Language menu appears on the
screen.
3
Follow the instructions on the screen.
Digital Auto Tuning: When you select
“Cable”, we recommend that you select
“Quick Scan” for quick tuning. Set
“Frequency” and “Network ID” according
to the information supplied from your cable
provider. If no channel is found using
“Quick Scan”, try “Full Scan” (though it
may take some time).
For a list of compatible cable providers,
refer to the support web site:
DVBC/
Programme Sorting: Changes the order of
analogue channels stored in the TV.
1 Press F/f to select the channel you want
to move to a new position, then press
.
2 Press F/f to select the new position for
the channel, then press
.
~
• You can also tune channels manually.
6GB
Watching TV
To watch programmes
Turn on the TV.
1
2
Press 1 on the TV to turn on the TV.
GUIDE
Select a mode.
OPTIONS
HOME
2
3
Select a TV channel.
3
Using Digital Electronic Programme
Guide
Press GUIDE in digital mode to display the
programme guide.
z
• The number 5, N, PROG + and AUDIO
buttons on the remote have a tactile dot.
Use the tactile dots as a reference when
operating the TV.
To utilise the TV’s features
HOME button
OPTIONS button
Press to display various operation and setting
screens.
Press to display convenient functions based on
the current input or content.
Picture
Sound
BRAVIA ENGINE
3
PRO
Add to Favourites
Lock/Unlock
PAP
Settings
System Settings
Motionflow
Sleep Timer
Headphone Volume
Speaker
System Information
TV
(Continued)
7GB
To use i-Manual
Operating instructions are built into your BRAVIA
TV and can be displayed on the screen.
To learn more about your TVs features you can
access your i-Manual with the touch of a button.
1
2
Press i-MANUAL.
1
Press G/g/F/f/ to select items.
2
x Welcome to i-Manual
x “BRAVIA” TV Features
x Watching TV
x Fun Features with Connected
Equipment
Introduces how to connect optional equipment.
x Parts Description
Introduces convenient features such as EPG
Guide, Favourites, etc.
x Troubleshooting
Find solutions for your problem.
x Playing a Disc
x Index
x Using the Home Menu
Customise your TV settings, etc.
~
• Images and illustrations may differ from what is displayed on the screen.
8GB
Playing a disc
Playback
The Playback feature allows you to play a
desired disc by simply inserting it into the disc
slot.
1 Insert a disc into the slot with the
playback side facing away from you.
2 For a video disc, playback starts
automatically.
For a music or photo disc, select
from the “Music” or “Photo” category
in the “XMB” and press
.
~
• If playback does not start automatically, select
from the “Video” category in the “XMB” and
press
.
9GB
Additional Information
Troubleshooting
Check whether the 1 (standby) indicator is flashing in red.
When the 1 (standby) indicator is flashing
The self-diagnosis function is activated.
1 Count how many times the 1 (standby) indicator flashes between each three second
break.
For example, the indicator may flash three times, go off for three seconds, then flash again three
times.
2 Press 1 on the TV to turn it off, disconnect the AC power cord (mains lead), and inform
your dealer or Sony service centre of how the indicator flashes (number of flashes).
When the 1 (standby) indicator is not flashing
1 Check the items in the tables below. (Also refer to “Troubleshooting” in the i-Manual.)
2 If the problem persists, have your TV serviced by qualified service personnel.
Condition
Explanation/Solution
Picture
There is no picture (screen • Check the antenna (aerial)/cable connection.
• Connect the TV to the AC power (mains), and press 1 on the TV.
• If the 1 (standby) indicator lights up in red, press "/1.
is dark) and no sound.
Tiny black points and/or
bright points appear on the
screen.
• The screen is composed of pixels. Tiny black points and/or bright
points (pixels) on the screen do not indicate a malfunction.
General
The TV turns off
automatically (the TV
enters standby mode).
• Check if the “Sleep Timer” is activated, or confirm the
“Duration” setting of “On Timer”.
• Check if the “Idle TV Standby” is activated.
The remote does not
function.
• Replace the batteries.
• Your TV may be in SYNC mode.
Press SYNC MENU, select “TV Control” and then select “Home
(Menu)” or “Options” to control the TV.
The “Parental Lock”/
“Parental Control Settings”
password has been
forgotten.
• Enter 9999 for the PIN code after selecting “PIN Code” in
“Parental Lock” of “System Settings” in the “Settings” menu.
(PIN code 9999 is always accepted.)
Sound is heard when
turning on the TV or
inserting a disc into the
built-in BD player.
• It is a sound of the built-in BD player working and not a
malfunction.
10GB
Specifications
System
LCD (Liquid Crystal Display) Panel
Panel system
TV system
Analogue: Depending on your country/area selection: B/G/H, D/K, L, I
Digital: DVB-T2/DVB-T/DVB-C
Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4
Colour/video system
Channel coverage
Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69
Digital: VHF/UHF
10 W + 10 W
Sound output
Input/Output jacks
Antenna (aerial) cable
75 ohm external terminal for VHF/UHF
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video
output.
/
AV1, 2
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio input (phono jacks)
COMPONENT IN
COMPONENT IN
HDMI IN1, 2, 3
Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital
Analogue audio input (minijack) (HDMI IN 1 only)
Video input (phono jack)
AV3
AV3
Audio input (phono jacks)
Digital optical jack (Two channel linear PCM, Dolby Digital, DTS Digital)
DIGITAL AUDIO OUT
(OPTICAL)
Audio output (phono jacks)
(VAR/FIX)
PC IN
PC Input (Mini D-sub 15-pin)
PC audio input (minijack)
USB port
Headphones jack
i
CAM (Conditional Access Module) slot
10BASE-T/100BASE-TX connector (Depending on the operating environment of the network,
connection speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality
are not guaranteed for this TV.)
LAN
* For LAN connections, use a Category 7 10BASE-T/100BASE-TX cable (not supplied).
External memory slot (For connecting the USB memory)
DC output: 5 V 500 mA Max
EXT
(Continued) 11GB
Model name KDL-
Power and others
Power requirements
40EX43B
32EX43B
220 V – 240 V AC, 50 Hz
Approx. 101.6 cm/40 inches
Approx. 80.1 cm/32 inches
72 W
Screen size (measured
diagonally)
1,920 dots (horizontal) × 1,080 lines (vertical)
107 W
Display resolution
Power
in “Home”/
consumption “Standard”
mode
176 W
128 W
in “Shop”/
“Vivid” mode
0.2 W (17 W when “Quick Start” is set to “On”)
156 kWh
0.2 W (17 W when “Quick Start” is set to “On”)
105 kWh
Standby power
consumption*
1
Average annual energy
2
consumption*
Type: Semiconductor, continuous
Laser
BD
Wavelength: 400 - 410 nm
Power: Max 20 mW
DVD Wavelength: 650 - 663 nm
Power: Max 7 mW
CD
Wavelength: 770 - 800 nm
Power: Max 7 mW
Dimensions (Approx.) (w × h × d)
99.2 × 63.6 × 28.0 cm
99.2 × 59.8 × 11.6 cm
80.0 × 53.4 × 25.0 cm
80.0 × 49.7 × 11.3 cm
with Table-Top Stand
without Table-Top Stand
Mass (Approx.)
18.0 kg
13.2 kg
11.2 kg
with Table-Top Stand
without Table-Top Stand
Supplied accessories
Optional accessories
Operating temperature
15.1 kg
Wall-Mount Bracket: SU-WL500
5 ºC to 35 ºC (41 °F to 95 °F)
1
* Specified standby power is reached after the TV finishes necessary internal processes.
2
* 4 hours a days and 365 days a year
~
• To save power consumption
– when you reduce backlight setting (the brightness of the screen), the power consumption reduce.
– the “Eco” settings (e.g. “Power Saving”, “Idle TV Standby”) help you to reduce the power consumption and
thus save money by reducing electricity bills.
Design and specifications are subject to change without notice.
12GB
Installing the Accessories (Wall-Mount Bracket)
To Customers:
For product protection and safety reasons, Sony strongly recommends that installing of your TV be
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the installation, periodic maintenance and examination of this
product.
Your TV can be installed using the SU-WL500 Wall-Mount Bracket (sold separately).
•
Do not install the TV in an inclined position. It is designed to be operated in a vertical position
only. Eject and take out any disc from the built-in BD player before installing the TV on a wall.
•
Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the
installation.
•
~
• Place the TV on the Table-Top Stand, when securing the Mounting Hook.
Screw
(+PSW
6 × 16)
Square hole
Mounting Hook
Sufficient expertise is required for installing this product, especially to determine the strength of
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to the
wall to Sony dealers or licensed contractors and pay adequate attention to safety during the
installation. Sony is not liable for any damage or injury caused by mishandling or improper
installation.
(Continued) 13GB
TV installation dimensions table
Screen centre point
Unit: cm
Length for each mounting
angle
Display dimensions
Screen centre dimension
Model Name
KDL-
Angle (0°)
A
B
C
D
E
99.2
80.0
59.8
49.7
12.2
17.2
42.5
42.6
16.0
15.7
40EX43B
32EX43B
Figures in the above table may differ slightly depending on the installation.
WARNING
The wall that the TV will be installed on should be capable of supporting a weight of at least four
14GB
Screw and Hook locations diagram/table
Model Name
Screw location
Hook location
KDL-40EX43B
KDL-32EX43B
d, g
e, g
b
c
Screw location
Hook location
When installing the Mounting Hook on the
TV.
When installing the TV onto the Base Bracket.
*
a
b
c
* Hook location “a” cannot be
used for the models.
15GB
–
Unplug the mains plug and clean it
regularly. If the plug is covered with
dust and it picks up moisture, its
insulation may deteriorate, which
could result in a fire.
Ventilation
• Never cover the ventilation holes or
Safety
insert anything in the cabinet.
• Leave space around the TV set as shown
below.
Information
• It is strongly recommended that you use
a Sony wall-mount bracket in order to
provide adequate air-circulation.
Notes
• Do not use the supplied mains lead on
Installation/Set-up
any other equipment.
Install and use the TV set in accordance
with the instructions below in order to
avoid any risk of fire, electrical shock or
damage and/or injuries.
Installed on the wall
• Do not pinch, bend, or twist the mains
lead excessively. The core conductors
may be exposed or broken.
• Do not modify the mains lead.
• Do not put anything heavy on the mains
lead.
• Do not pull on the mains lead itself when
disconnecting the mains lead.
• Do not connect too many appliances to
the same mains socket.
• Do not use a poor fitting mains socket.
30 cm
10 cm
10 cm
Installation
• The TV set should be installed near an
easily accessible mains socket.
• Place the TV set on a stable, level
surface.
10 cm
• Only qualified service personnel should
carry out wall installations.
• For safety reasons, it is strongly
recommended that you use Sony
accessories, including:
Leave at least this space around
the set.
Prohibited Usage
Do not install/use the TV set in locations,
environments or situations such as those
listed below, or the TV set may
malfunction and cause a fire, electrical
shock, damage and/or injuries.
Installed with stand
–
Wall-mount bracket SU-WL500
30 cm
• Be sure to use the screws supplied with
the Wall-mount bracket when attaching
the mounting hooks to the TV set. The
supplied screws are designed so that they
are 8 mm to 12 mm in length when
measured from the attaching surface of
the mounting hook.
The diameter and length of the screws
differ depending on the Wall-mount
bracket model.
10 cm
10 cm
6 cm
Location:
Outdoors (in direct sunlight), at the
seashore, on a ship or other vessel, inside a
vehicle, in medical institutions, unstable
locations, near water, rain, moisture or
smoke.
Leave at least this space around
the set.
• To ensure proper ventilation and prevent
the collection of dirt or dust:
Use of screws other than those supplied
may result in internal damage to the TV
set or cause it to fall, etc.
–
Do not lay the TV set flat, install
upside down, backwards, or
sideways.
Environment:
Places that are hot, humid, or excessively
dusty; where insects may enter; where it
might be exposed to mechanical vibration,
near flammable objects (candles, etc). The
TV set shall not be exposed to dripping or
splashing and no objects filled with
liquids, such as vases, shall be placed on
the TV.
8 mm - 12 mm
–
–
Do not place the TV set on a shelf,
rug, bed or in a closet.
Do not cover the TV set with a cloth,
such as curtains, or items such as
newspapers, etc.
Screw (supplied with the
Wall-mount bracket)
Mounting Hook
–
Do not install the TV set as shown
below.
Hook attachment on rear
of TV set
Situation:
Air circulation is blocked.
Do not use when your hands are wet, with
the cabinet removed, or with attachments
not recommended by the manufacturer.
Disconnect the TV set from mains socket
and aerial during lightning storms.
Transporting
• Before
transporting the
TV set, disconnect
all cables.
• Two or three
people are needed
to transport a large
TV set.
• When transporting
the TV set by
hand, hold it as
shown on the
right. Do not put
stress on the LCD
panel and the
frame around the
screen.
• When lifting or moving the TV set, hold
it firmly from the bottom.
Wall
Wall
Broken pieces:
• Do not throw anything at the TV set. The
screen glass may break by the impact
and cause serious injury.
• If the surface of the TV set cracks, do
not touch it until you have unplugged the
mains lead. Otherwise electric shock
may result.
Mains lead
Handle the mains lead and socket as
follows in order to avoid any risk of fire,
electrical shock or damage and/or injuries:
Condensation
If the TV is brought directly from a cold to
a warm location, or is placed in a very
damp room, or is placed in a room in
which heating has just been turned on,
moisture may condense on the surface or
inside the TV. Should this occur, turn off
the TV and leave the TV off until the
moisture evaporates, and then the TV can
be used. If a disc is inserted in the built-in
BD player, eject and take out the disc and
turn off the TV. Using the TV with
–
–
–
–
Use only mains leads supplied by
Sony, not other suppliers.
Insert the plug fully into the mains
socket.
Operate the TV set on a 220-240 V AC
supply only.
When wiring cables, be sure to unplug
the mains lead for your safety and take
care not to catch your feet on the
cables.
Disconnect the mains lead from the
mains socket before working on or
moving the TV set.
Keep the mains lead away from heat
sources.
• When transporting the TV set, do not
subject it to jolts or excessive vibration.
• When transporting the TV set for repairs
or when moving, pack it using the
original carton and packing material.
moisture in or on it may cause the TV to
show poor picture and/or poor colour or
may cause a malfunction.
–
–
16GB
• If this TV set is used in a cold place, a
smear may occur in the picture or the
picture may become dark. This does not
indicate a failure. These phenomena
disappear as the temperature rises.
• Ghosting may occur when still pictures
are displayed continuously. It may
disappear after a few moments.
• The screen and cabinet get warm when
this TV set is in use. This is not a
malfunction.
• The LCD screen contains a small
amount of liquid crystal. Some
Disposal of Old
Electrical &
Electronic
Equipment
(Applicable in
When not in use
• If you will not be using the TV set for
several days, the TV set should be
disconnected from the mains for
environmental and safety reasons.
• As the TV set is not disconnected from
the mains when the TV set is just turned
off, pull the plug from the mains to
disconnect the TV set completely.
• However, some TV sets may have
features that require the TV set to be left
in standby to work correctly.
the European
Union and other European
countries with separate
collection systems)
This symbol on the product or on its
packaging indicates that this product shall
not be treated as household waste. Instead
it shall be handed over to the applicable
collection point for the recycling of
electrical and electronic equipment. By
ensuring this product is disposed of
correctly, you will help prevent potential
negative consequences for the
fluorescent tubes used in this TV set also
contain mercury. Follow your local
ordinances and regulations for disposal.
For children
• Do not allow children to climb on the
TV set.
• Keep small accessories out of the reach
of children, so that they are not
mistakenly swallowed.
Handling and cleaning the
screen surface/cabinet of
the TV set
Be sure to unplug the mains lead
connected to the TV set from mains socket
before cleaning.
• Be sure small children do not put hands
into the disc slot. It may cause injury.
environment and human health, which
could otherwise be caused by
To avoid material degradation or screen
coating degradation, observe the following
precautions.
If the following problems
occur...
Turn off the TV set and unplug the mains
lead immediately if any of the following
problems occur.
inappropriate waste handling of this
product. The recycling of materials will
help to conserve natural resources. For
more detailed information about recycling
of this product, please contact your local
Civic Office, your household waste
disposal service or the shop where you
purchased the product.
• To remove dust from the screen surface/
cabinet, wipe gently with a soft cloth. If
dust is persistent, wipe with a soft cloth
slightly moistened with a diluted mild
detergent solution.
• Do not spray water or detergent directly
on the TV set. It may drip to the bottom
of the screen or exterior parts, and may
cause a malfunction.
• Never use any type of abrasive pad,
alkaline/acid cleaner, scouring powder,
or volatile solvent, such as alcohol,
benzene, thinner or insecticide. Using
such materials or maintaining prolonged
contact with rubber or vinyl materials
may result in damage to the screen
surface and cabinet material.
• Periodic vacuuming of the ventilation
openings is recommended to ensure to
proper ventilation.
• When adjusting the angle of the TV set,
move it slowly so as to prevent the TV
set from moving or slipping off from its
table stand.
Ask your dealer or Sony service centre to
have it checked by qualified service
personnel.
When:
Disposal of
waste batteries
(applicable in the
European Union
and other
–
–
–
Mains lead is damaged.
Poor fitting of mains socket.
TV set is damaged by being dropped,
hit or having something thrown at it.
–
Any liquid or solid object falls through
openings in the cabinet.
European
Warning
To prevent the spread of fire, keep candles
or other open flames away from this
product at all time.
countries with separate
collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not be
treated as household waste. On certain
batteries this symbol might be used in
combination with a chemical symbol. The
chemical symbols for mercury (Hg) or
lead (Pb) are added if the battery contains
more than 0.0005% mercury or 0.004%
lead. By ensuring these batteries are
disposed of correctly, you will help
prevent potentially negative consequences
for the environment and human health
which could otherwise be caused by
inappropriate waste handling of the
battery. The recycling of the materials will
help to conserve natural resources. In case
of products that for safety, performance or
data integrity reasons require a permanent
connection with an incorporated battery,
this battery should be replaced by qualified
service staff only. To ensure that the
battery will be treated properly, hand over
the product at end-of-life to the applicable
collection point for the recycling of
electrical and electronic equipment. For all
other batteries, please view the section on
how to remove the battery from the
product safely. Hand the battery over to
the applicable collection point for the
recycling of waste batteries. For more
detailed information about recycling of
this product or battery, please contact your
local Civic Office, your household waste
disposal service or the shop where you
purchased the product.
Optional Equipment
• Keep optional components or any
equipment emitting electromagnetic
radiation away from the TV set.
Otherwise picture distortion and/or noisy
sound may occur.
• This equipment has been tested and
found to comply with the limits set out in
the EMC Directive using a connection
signal cable shorter than 3 meters.
Precautions
Viewing the TV
• View the TV in moderate light, as
viewing the TV in poor light or during
long period of time, strains your eyes.
• When using headphones, adjust the
volume so as to avoid excessive levels,
as hearing damage may result.
Batteries
• Observe the correct polarity when
inserting batteries.
• Do not use different types of batteries
together or mix old and new batteries.
• Dispose of batteries in an
environmentally friendly way. Certain
regions may regulate the disposal of
batteries. Please consult your local
authority.
• Handle the remote with care. Do not
drop or step on it, or spill liquid of any
kind onto it.
LCD Screen
• Although the LCD screen is made with
high-precision technology and 99.99%
or more of the pixels are effective, black
dots may appear or bright points of light
(red, blue, or green) may appear
constantly on the LCD screen. This is a
structural property of the LCD screen
and is not a malfunction.
• Do not push or scratch the front filter, or
place objects on top of this TV set. The
image may be uneven or the LCD screen
may be damaged.
• Do not place the remote in a location
near a heat source, a place subject to
direct sunlight, or a damp room.
Disposal of the TV set
17GB
Safety
information about
built-in BD player
• The use of optical instruments with this
product will increase eye hazard. As the
laser beam used in this built-in BD/DVD
player is harmful to eyes, do not attempt
to disassemble the cabinet.
• Do not use solvents such as benzine,
thinner, commercially available disc/
lens cleaners, or anti-static spray
intended for vinyl LPs.
• If you have printed the disc’s label, dry
the label before playing.
• Do not force a disc into the disc slot.
When there is already a disc inside the
built-in BD player, trying to insert
another disc may cause malfunction.
Refer servicing to qualified personnel
only.
• Sound may jump or picture distortion
may occur if a lens is dirty with dust. For
repair, contact the shop from which the
product was purchased or a customer
information service centre.
This label is located on the laser
protective housing inside the enclosure.
Precautions
about built-in BD
player
This appliance is classified as a CLASS
1 LASER product. The CLASS 1
LASER PRODUCT MARKING is
located on the laser protective housing
inside the enclosure.
• The TV has a region code located on the
rear of the unit.
• Do not use cleaning discs or disc/lens
cleaners (including wet or spray types).
These may cause the apparatus to
malfunction.
• When ejecting a disc, the disc may hit
objects and cause damage or injury.
Keep an open space around the disc slot.
• Take out any discs from the built-in BD
player when you move the TV. If you
don’t, the disc may be damaged. Eject
and take out the disc before moving the
TV.
• To keep the disc clean, handle the disc
by its edge. Do not touch the surface.
Dust, fingerprints, or scratches on the
disc may cause it to malfunction.
• Do not pull out the AC power cord
(mains lead) while the built-in BD player
is playing.
• Do not use the following discs.
–
A lens cleaning disc.
–
A disc that has a nonstandard shape
(e.g., card, heart).
–
A disc with a label or sticker on it.
–
A disc that has cellophane tape or
sticker adhesive on it.
• Do not resurface the playing side of a
disc to remove surface scratches.
• When ejecting a disc from the built-in
BD player by pressing Z on the TV, be
sure to take out the disc from the disc
slot. Do not leave the disc in the disc
slot.
• Eject and take out the disc from the disc
slot and turn off the TV when not using
the TV.
• Do not expose the disc to direct sunlight
or heat sources such as hot air ducts, or
leave it in a car parked in direct sunlight
as the temperature may rise considerably
inside the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth.
Wipe the disc from the centre out.
18GB
Keep this Instruction
manual safe you’ll
need it
Television in the UK is going digital, bringing us all more.
Please see overleaf to find out when your area switches to digital.
Digital UK is the independent, non-profit organisation leading the process of digital TV switchover
in the UK. Digital UK provides impartial information on what people need to do to prepare for the
move to digital, and when they need to do it.
How the switchover affects your TV equipment:
Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by
simply plugging it into your aerial socket (check if you can get digital TV through your aerial now,
When the TV switchover happens in your area, there are at least two occasions when you will need
to re-tune your TV in order to continue receiving your existing TV channels, and also to pick up new
ones. Digital UK, the body leading the digital TV switchover, will advise you when you need to re-
tune during the switchover.
19GB
How to re-tune:
1
2
3
4
5
6
Press "HOME" on the remote
Press G/g to select "Settings"
Press F/f to select "Digital Set-up", then press
Press to select "Digital Auto Tuning"
Press G to select "Yes" then press to start "Digital Auto Tuning"
Follow the on screen instructions.
If you are missing any channels, it may be that they are not available in your area, or that your aerial
needs upgrading.
If you have any questions, please contact Sony on 08705 111 999 or call Digital UK on 0845 6 50 50
†Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends.
Rates may vary for calls from non-BT lines.
20GB
For useful information about Sony products
4-180-168-11(1)
© 2010 Sony Corporation
|