Sony Speaker System CMTSBT100 User Manual

ˎCompatibility with all MP3 encoding/writing software,  
CD-R/RW drive and recording device, and recording media  
cannot be guaranteed. Incompatible MP3 discs may  
produce noise or interrupted audio or may not play at all.  
ˎWith some connected USB devices, it may take a long time  
to transmit signals from the system or to finish reading the  
USB device.  
ˎCompatibility with all encoding/writing software cannot be  
guaranteed. If audio files on the USB device were originally  
encoded with incompatible software, those files may  
produce noise or ,may malfunction.  
ˎThe maximum number of folders and files on the USB  
device compatible with this system is:  
1,000* folders (including the root folder)  
3,000 files  
Notes  
Operation is subject to the following two  
conditions:  
(1) this device may not cause interference, and  
(2) this device must accept any interference,  
including interference that may cause undesired  
operation of this device.  
2 Press TUNER MEMORY  
.
ˎIf you initiate setup during BLUETOOTH connection, the  
connection is cut.  
4-464-273-11 (1)  
Location of Controls  
Operations  
Preset number  
ˎWhen using an Apple product, update it to the latest  
software version. For details on updating, refer to the  
operation manual supplied with your Apple product.  
ˎIf sound is interrupted during reception in AAC codec  
format, set the BT AAC menu to “OFF.”  
*
This include folders that have no MP3 or other files. The  
number of folders that the system can recognize may  
be less than actual number of folders, depending on the  
folder structure.  
Unit (Front)  
Playing a CD-DA/MP3 disc  
1 Press CD FUNCTION on the remote or press  
FUNCTION on the unit repeatedly until “CD”  
appears in the display .  
This equipment complies with IC radiation  
exposure limits set forth for an uncontrolled  
environment and meets RSS-102 of the IC radio  
frequency (RF) Exposure rules. This equipment  
has very low levels of RF energy that it deemed to  
comply without maximum permissive exposure  
evaluation (MPE). But it is desirable that it should  
be installed and operated keeping the radiator  
at least 20cm or more away from person’s body  
(excluding extremities:hands, wrists, feet and  
ankles).  
  
preset number.  
3 Press TUNE +/  
repeatedly to select a  
Pairing the system with a BLUETOOTH  
device  
If another station is already assigned to the  
selected preset number, the station is replaced  
by the new station.  
250 files in a single folder  
8 folder levels (in the tree structure of files)  
2 Press the (open/close) button to open  
Creating your own program  
(Program Play)  
Connection example  
the disc tray .  
*
This includes folders that have no playable audio file and  
empty folders. The number of folders that the system  
can recognize may be less than actual number of folders,  
depending on the folder structure.  
Home Audio System  
4 Press  
to register the station.  
3 Load a disc with the label side facing up.  
1 Press CD FUNCTION  
on the remote or press  
“COMPLETE” appears in the display .  
Label side  
(printed side)  
Operating Instructions  
GB  
FUNCTION  
on the unit repeatedly until “CD”  
appears in the display .  
ˎThe system does not necessarily support all the functions  
provided in a connected USB device.  
ˎFolders that have no audio files are not recognized.  
ˎThe audio formats that you can listen to with this system  
are as follows:  
MP3: file extension .mp3”  
WMA: file extension .wma”  
5 Repeat steps 1 through 4 to register other  
stations.  
2 Press PLAY MODE repeatedly until “PGM”  
You can preset up to 20 FM, 10 AM stations.  
appears while the player is stopped.  
Note on DualDiscs  
3 Select a folder (MP3 disc only).  
To tune in to a preset radio station  
A DualDisc is a two sided disc product which  
mates DVD recorded material on one side with  
digital audio material on the other side. However,  
since the audio material side does not conform to  
the Compact Disc (CD) standard, playback on this  
product is not guaranteed.  
Press TUNING MODE  
repeatedly until “PRESET”  
  
repeatedly to select the  
Press  
+/  
AAC: file extension .m4a,” “mp4” or .3gp”  
Tip  
appears in the display , and then press TUNE  
desired folder.  
If you want to program all files in the folder,  
Note that even when file name has the correct file  
extension, if the actual file differs, the system may produce  
noise or may malfunction.  
When you use headphones, connect to (headphone) jack .  
  
+/  
to select the preset number to which the  
desired station is registered.  
.
press  
This manual mainly explains operations using  
the remote, but the same operations can also be  
performed using the buttons on the unit having  
the same or similar names.  
BLUETOOTH device  
such as a “WALKMAN”  
Remote  
©2013 Sony Corporation Printed in China  
4 Select the desired track or file number.  
(open/close)   
Press /  
repeatedly until the desired  
Music discs encoded with copyright  
protection technologies  
1 Place the BLUETOOTH device to be connected  
Charging a USB device or iPod/  
iPhone/iPad  
track or file number appears.  
Playing a file on a USB device  
You can play audio files stored on a USB device by  
connecting a USB memory or USB device to the  
system. The playable audio format is MP3/WMA*/  
AAC*.  
Check the websites below for the information  
about compatible USB devices.  
For customers in the United States:  
CMT-SBT100  
4 Press the (open/close) button to close  
within 1 meter from the system.  
To use the remote  
the disc tray .  
This product is designed to playback discs that  
conform to the Compact Disc (CD) standard.  
Recently, various music discs encoded with  
copyright protection technologies are marketed  
by some record companies. Please be aware  
that among those discs, there are some that do  
not conform to the CD standard and may not be  
playable by this product.  
2 Press BLUETOOTH FUNCTION  
or press  
Slide and remove the battery compartment lid,  
and insert the two supplied R6 (size AA) batteries,  
side first, matching the polarities shown below.  
5 Press (play/pause) button .  
Playback starts.  
If you connect a USB device or iPod/iPhone/iPad  
FUNCTION  
on the unit repeatedly until “BT  
.
AUDIO” appears in the display  
to the USB port  
when the system is turned on,  
Selected track Total playing time  
or file number of the selected  
track or file  
charging begins automatically.  
ˎThe BLUETOOTH indicator  
in blue.  
flashes slowly  
10) Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit  
from the apparatus.  
11) Only use attachments/accessories specified by  
the manufacturer.  
Notes  
ˎIf you cannot remove the disc and “LOCKED” appears in the  
display , contact your nearest Sony dealer.  
ˎDo not load a disc with non-standard shapes (e.g., heart,  
square, star). Doing this may cause irreparable damage to  
the system.  
ˎDo not use a disc with tape, stickers or paste on it as this  
may cause malfunction.  
ˎWhen you remove a disc, do not touch the surface of the  
disc.  
ˎIf the system has been automatically  
connected with the BLUETOOTH device in  
To stop charging the USB device  
.
  
Press /  
5 Press  
to turn off the system, and then  
the past, press BLUETOOTH  
on the unit  
disconnect the USB cable.  
“--.--” appears when the total playing time  
exceeds 100 minutes for an CD-DA or when you  
program an MP3 files.  
For customers in Canada:  
to cancel the connection so that “BT AUDIO”  
License and Trademark Notice  
ˎWindows Media is either a registered trademark  
or trademark of Microsoft Corporation in the  
United States and/or other countries.  
ˎMPEG Layer-3 audio coding technology and  
patents licensed from Fraunhofer IIS and  
Thomson.  
ˎThe BLUETOOTH® word mark and logos are  
registered trademarks owned by BLUETOOTH  
SIG, Inc. and any use of such marks by Sony  
Corporation is under license. Other trademarks  
and trade names are those of their respective  
owners.  
Notes  
.
appears in the display  
12) Use only with the cart, stand, tripod,  
bracket, or table specified by the  
ˎYou cannot charge the USB device or iPod/iPhone/iPad  
when the system is off. Some USB devices and iPod/iPhone  
may not be charged owing to their characteristics.  
ˎIf the system enters Standby mode during charging of a  
USB device or iPod/iPhone/iPad, the charging stops in  
progress. Before charging, turn off the Automatic Standby  
function. For details, see “Setting the Automatic Standby  
function.”  
*
Files with DRM (Digital Rights Management) copyright  
protection or files downloaded from an online music store  
cannot be played on this system. If you try to play one of  
these files, the system plays the next unprotected audio  
file.  
3 Press and hold BLUETOOTH  
on the unit for  
WARNING  
6 Repeat steps 3 through 5 to program  
additional tracks or files, up to a total of 25  
tracks or files.  
2 seconds or longer.  
manufacturer, or sold with the  
Notes on using the remote  
ˎWith normal use, the batteries should last for about 6  
months.  
ˎDo not mix an old battery with a new one or mix different  
types of batteries.  
ˎIf you do not use the remote for a long period of time,  
remove the batteries to avoid damage from battery leakage  
and corrosion.  
To reduce the risk of fire or electric shock, do  
not expose this apparatus to rain or moisture.  
The BLUETOOTH indicator  
blue and “PAIRING” flashes in the display  
The system is in Pairing mode.  
flashes quickly in  
apparatus.  
Other operations  
.
When a cart is used, use caution whenmoving  
the cart/apparatus combination to avoid injury  
from tip-over.  
  
7 Press  
.
To reduce the risk of fire, do not cover the  
ventilation opening of the appliance with  
newspapers, tablecloths, curtains, etc.  
Do not expose the appliance to naked flame  
sources (for example, lighted candles).  
1 Press USB FUNCTION  
on the remote or  
To  
Do the following:  
press FUNCTION  
on the unit repeatedly  
Your program of tracks or files starts playback.  
The programmed files or tracks remain  
available until you remove the disc from the  
Pause playback  
4 Perform the pairing operation on the  
Press . To resume play,  
press the button again.  
until “USB” appears in the display .  
13) Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14) Refer all servicing to qualified service  
personnel.  
BLUETOOTH device and search for this system  
with the BLUETOOTH device.  
2 Connect the USB device directly or via the USB  
cable supplied with the USB device to the USB  
port on the unit.  
Stop playback  
.
Press   
disc tray  
or unplug the power cord.  
Using the BLUETOOTH function  
You can listen to music from your iPod/iPhone/  
iPad or BLUETOOTH device over a wireless  
connection.  
Before using the BLUETOOTH function, perform  
pairing to register your BLUETOOTH device.  
When searching has finished, a list of the  
devices found may appear on the BLUETOOTH  
device display.  
ˎThis system appears as “SONY:CMT-SBT100.”  
If it does not appear, perform the procedure  
from step 1 again.  
ˎWhen establishing connection with this  
system, select the audio profile (A2DP, AVRCP)  
on the BLUETOOTH device.  
ˎIf the BLUETOOTH device does not support  
AVRCP (Audio Video Remote Control Profile),  
you cannot perform playback or stop  
playback with the system.  
To reduce the risk of fire or electric shock, do not  
expose this appliance to dripping or splashing,  
and do not place objects filled with liquids, such  
as vases, on the appliance.  
  
.
Select a track  
or file  
To play the same program again, press  
.
Press /  
Getting Started  
Servicing is required when the apparatus has  
been damaged in any way, such as power-  
supply cord or plug is damaged, liquid has  
been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or  
has been dropped.  
3 Press to start playback.  
Find a point in a  
track or file  
To cancel Program Play  
Hold down /  
/  
(or  
ˎThe N Mark is a trademark or registered  
trademark of NFC Forum, Inc. in the United  
States and in other countries.  
Other operations  
Press PLAY MODE repeatedly until “PGM”  
on the unit)  
Rear of the speaker  
Do not install the appliance in a confined space,  
such as a bookcase or built-in cabinet.  
disappears while the player is stopped.  
during playback, and release  
the button at the desired point.  
To  
Do the following:  
ˎAndroid is a trademark of Google Inc.  
Pause playback  
Press . To resume play,  
press the button again.  
As the main plug is used to disconnect the unit  
from the mains, connect the unit to an easily  
accessible AC outlet. Should you notice an  
abnormality in the unit, disconnect the main plug  
from the AC outlet immediately.  
To delete the last track or file of the  
The system supports registration and connection  
of the BLUETOOTH device and NFC, which enables  
data communication by just touching a specified  
location. For details on NFC, see “Connecting by  
one-touch action (NFC).”  
Select Repeat  
Play  
ˎThis product is protected by certain intellectual  
property rights of Microsoft Corporation. Use or  
distribution of such technology outside of this  
product is prohibited without a license from  
Microsoft or an authorized Microsoft subsidiary.  
ˎThe system names and product names indicated  
in this manual are generally the trademarks or  
registered trademarks of the manufacturer. ™  
and ® marks are omitted in this manual.  
Press REPEAT  
repeatedly  
until “ ” (all tracks of files)  
or “ 1” (single track or file)  
appears.  
program  
The following FCC statement applies only  
to the version of this model manufactured  
for sale in the U.S.A. Other versions may  
not comply with FCC technical regulations.  
Stop playback  
Press . To resume play,  
Press CLEAR  
while the player is stopped.  
press *1. To cancel  
Notes  
resume play, press   
Select a folder on  
an MP3 disc  
  
+/ repeatedly.  
ˎIf the disc is ejected after programming, all the  
programmed tracks or files are deleted.  
ˎIf the power cord is disconnected when the system is on,  
the programmed tracks or files are deleted.  
Press  
red   
again*2.  
This symbol is intended to alert  
the user to the presence of  
uninsulated“dangerous voltage”  
within the product’s enclosure that  
may be of sufficient magnitude to  
constitute a risk of electric shock to  
persons.  
ˎFor details on operations of the BLUETOOTH  
device to be connected, refer to the operation  
manual supplied with your BLUETOOTH  
device.  
What is pairing?  
Select a folder  
Select a file  
  
Remove a disc  
Press  
Press /  
Hold down /  
+/  
repeatedly.  
The BLUETOOTH devices to be connected must be  
registered with each other beforehand. Pairing is  
an operation of registering two devices.  
Once a pairing operation is performed, it does  
not have to be performed again. In the following  
cases, however, a pairing operation must be  
performed again:  
NOTE:  
Press   
on the unit.  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuantto Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses  
and can radiate radio frequency energy and, if  
not installed and used in accordance with the  
instructions, may cause harmful interference  
to radio communications. However, there is no  
guarantee that interference will not occur in a  
particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning  
the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of  
the following measures:  
.
Find a point in  
a file  
To change the play mode  
5 Select “SONY:CMT-SBT100” in the display of  
Press PLAY MODE repeatedly while the player  
is stopped. You can select Normal Play mode (no  
indication or “FLDR”* appears), Shuffle Play mode  
(“SHUF” or “FLDR SHUF”* appears), or Program  
Play mode (“PGM” appears).  
(/  
during playback, and release  
the button at the desired point.  
on the unit)  
the BLUETOOTH device.  
Listening to the radio  
If prompted to enter a passkey on the  
BLUETOOTH device, enter “0000.”  
This symbol is intended to alert the  
user to the presence of important  
operating and maintenance  
(servicing) instructions in the  
literature accompanying the  
appliance.  
ˎPairing information was erased when the  
BLUETOOTH device was repaired.  
ˎYou attempt to pair the system with more than  
10 BLUETOOTH devices.  
This system can pair with up to 9 BLUETOOTH  
devices. If you pair another BLUETOOTH device  
after pairing with 9 devices was performed,  
pairing information of the device that was  
connected with the system first is overwritten  
with that of the new device.  
ˎPairing registration information of this system is  
erased from the connected device.  
ˎIf you initialize the system or erase the  
pairing history with the system, all the pairing  
information will be erased.  
Select Repeat  
Play  
Tuning in a radio station  
Press REPEAT  
repeatedly  
6 Operate the BLUETOOTH device and perform  
until “ ” (all audio files) or  
1” (single audio file)  
appears.  
BLUETOOTH connection.  
1 Press TUNER FUNCTION  
on the remote or  
Play mode  
press FUNCTION  
on the unit repeatedly  
until “TUNER FM” or “TUNER AM” appears in  
When pairing is completed and connection  
with the BLUETOOTH device is established  
correctly, the display  
from “PAIRING” and the BLUETOOTH indicator  
ˎDepending on the type of BLUETOOTH device,  
connection may start automatically after  
pairing is completed.  
the display.  
changes to “BT AUDIO”  
*1  
When playing a VBR MP3/WMA file, the system may  
resume playback from a different point.  
When resume play is canceled, the display returns to the  
number of folders.  
Do not expose batteries or appliances with  
battery-installed to excessive heat, such as  
sunshine and fire.  
2 Perform tuning.  
*2  
*
When “FLDR” or “FLDR SHUF” appears, all the files in the  
selected folder on the MP3 disc will be played. When  
playing a CD-DA disc, the system performs the same  
operation as Normal Play (no indication) or Shuffle Play  
“SHUF.”  
flashes slowly in blue.  
For automatic scanning  
Setting the clock  
The unit is not disconnected from the mains as  
long as it is connected to the AC outlet, even if the  
unit itself has been turned off.  
Press TUNING MODE  
repeatedly until AUTO”  
  
Power input (AC IN)  
To change the play mode  
appears, and then press TUNE +/  
. Scanning  
1 Press   
to turn on the system.  
After all equipments are connected, connect the  
power cord to the wall outlet.  
Press PLAY MODE repeatedly while the player  
is stopped. You can select Normal Play mode (no  
indication or “FLDR” appears*1), or Shuffle Play  
mode (“SHUF” or “FLDR SHUF” appears*2).  
stops automatically when a station is tuned in,  
and “STEREO” (for stereo programs only) appears  
in the display .  
2 Press TIMER MENU  
to select the clock set  
Notes  
Reorient or relocate the receiving antenna.  
Increase the separation between the  
When “PUSH STOP” appears  
You cannot change the play mode during  
playback. Stop playback then change the play  
mode.  
ˎ“Passkey” may be called “Passcode,” “PIN code,” “PIN  
number” or “Password,” etc., depending on the device.  
ˎThe pairing standby status of the system is cancelled after  
about 5 minutes. If pairing is not successful, perform the  
procedure from step 1.  
ˎIf you want to pair with several BLUETOOTH devices,  
perform the procedure from step 1 to 6 individually for each  
BLUETOOTH device.  
mode.  
CAUTION  
Speakers (left/right) connectors  
Firmly connect the right speaker cord to R, and  
the left speaker cord to L.  
equipment and receiver.  
If “PLAY SET” flashes, press /  
to select “CLOCK,” and then press  
repeatedly  
The use of optical instruments with this product  
will increase eye hazard.  
(enter)  
.
Connect the equipment into an outlet on a  
circuit different from that to which the receiver  
is connected.  
*1  
When no indication is selected, the system plays all files on  
the USB device. When “FLDR” is selected, the system plays  
all files in the selected folder on the USB device.  
When “SHUF” is selected, the system shuffle-plays all audio  
files on the USB device. When “FLDR SHUF” is selected, the  
system shuffle-plays all audio files in the selected folder.  
(enter)  
3 Press /  
press  
repeatedly to set the hour, then  
About the BLUETOOTH indicator  
Owner’s Record  
Note on the play mode  
.
If the scanning does not stop, press   
to stop  
The BLUETOOTH indicator in the center of the  
The model and serial numbers are located  
on the rear exterior of the unit. Record these  
numbers in the space provided below. Refer to  
them whenever you call upon your Sony dealer  
regarding this product.  
If the power cord is disconnected when the  
system is on, the play mode returns to Normal  
Play.  
*2  
AUDIO IN (external input) jack  
Connect optional external equipment with an  
audio connecting cable (not supplied).  
Consult the dealer or an experienced radio/TV  
scanning, then perform manual tuning (below).  
4 Use the same procedure to set the minutes.  
Note  
The clock settings are reset when you disconnect the power  
cord or if a power failure occurs.  
BLUETOOTH button  
BLUETOOTH status.  
allows checking of the  
technician for help.  
Tip  
When you tune in a station that provides RDS  
services, information such as the service name or  
station name is provided by broadcasts.  
You can perform a pairing operation or attempt to make a  
BLUETOOTH connection with another BLUETOOTH device  
while the BLUETOOTH connection is established with one  
BLUETOOTH device. The currently established BLUETOOTH  
connection is cancelled when BLUETOOTH connection with  
another device is successfully established.  
CAUTION  
Note on the play mode  
System status  
Indicator status  
Notes on Repeat Play  
You are cautioned that any changes or  
modifications not expressly approved in this  
manual could void your authority to operate this  
equipment.  
If the power cord is disconnected when the  
system is on, the play mode returns to Normal  
Play.  
Antennas  
ˎ“ ” indicates that all tracks or files will be repeated until  
you stop playback.  
The system is in  
Flashes slowly in blue.  
Model No.  
Serial No.  
To display the clock when the system is off  
FM lead antenna (supplied)  
AM loop antenna (supplied)  
For manual tuning  
BLUETOOTH Standby  
(when the system is on).  
Press DISPLAY  
repeatedly to display the clock.  
ˎ“ 1” indicates that a single track or file will be repeated  
until you stop playback.  
ˎIf the power cord is disconnected when the system is on,  
Repeat Play is cancelled.  
Press TUNING MODE  
repeatedly until  
The clock is displayed for about 8 seconds.  
If the system is in BLUETOOTH Standby mode, the  
clock does not appear by pressing DISPLAY .  
  
“MANUAL” appears, and then press TUNE +/  
repeatedly to tune in the desired station.  
Important Safety Instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
Find a location and an orientation that provide  
good reception, and then fix the antennas to a  
stable surface (window, wall, etc.).  
Keep the antennas away from the unit, power  
cord and other AV components to avoid picking  
noise.  
Notes on Repeat Play  
During BLUETOOTH  
pairing  
Flashes quickly in blue.  
Flashes in blue.  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two  
conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any  
interference received, including interference that  
may cause undesired operation.  
To erase the pairing registration  
information  
ˎ“ ” indicates that all files will be repeated until you stop  
playback.  
ˎ“ 1” indicates that a single file will be repeated until you  
stop playback.  
ˎIf the power cord is disconnected when the system is on,  
Repeat Play is cancelled.  
Tip  
The system is  
Notes on Shuffle Play mode  
To reduce static noise on a weak FM stereo station, press FM  
MODE repeatedly until “MONO” appears to turn off stereo  
reception.  
1 Press BLUETOOTH FUNCTION  
on the remote  
ˎWhen Shuffle Play mode is set to “SHUF,” the system  
shuffle-plays all tracks or files on the disc. When Shuffle  
Play mode is set to “FLDR SHUF,” the system shuffle-plays all  
tracks or files in selected folder.  
Attaching speaker pads  
attempting to connect  
with a BLUETOOTH  
device.  
or press FUNCTION  
on the unit repeatedly  
Attach the supplied speaker pads to the bottom  
of the speakers to prevent slipping.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings.  
Install in accordance with the manufacturer’s  
instructions.  
8) Do not install near any heat sources such  
as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
9) Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong.  
.
until “BT AUDIO” appears in the display  
Secure the end of the FM lead antenna with  
adhesive tape.  
When the system is connected with a  
BLUETOOTH device, the device name set for the  
connected BLUETOOTH device appears in the  
ˎWhen you turn off the system, the selected Shuffle Play  
mode (“SHUF” or “FLDR SHUF”) is cleared and the play  
mode returns to Normal or FLDR Play mode.  
The system has  
established in  
Lit in blue.  
Note on Shuffle Play mode  
To change the AM tuning interval  
The default setting for AM tuning interval is 9 kHz  
(or 10 kHz for some areas). Use the buttons on the  
unit to perform this operation.  
This equipment must not be co-located or  
operated in conjunction with any other antenna  
or transmitter.  
When you turn off the system, the selected Shuffle Play  
mode (“SHUF” or “FLDR SHUF”) is cleared and the play mode  
returns to Normal Play mode (no indication or “FLDR”).  
connection with a  
BLUETOOTH device.  
To prepare the AM loop antenna  
display  
of the system. Press BLUETOOTH  
Notes on playing MP3 discs  
ˎDo not save unnecessary folders or files on a disc that has  
MP3 files.  
ˎFolders that have no MP3 files are not recognized on the  
system.  
This equipment complies with FCC radiation  
exposure limits set forth for an uncontrolled  
environment and meets the FCC radio frequency  
(RF) Exposure Guidelines in Supplement C to  
OET65. This equipment has very low levels of  
RF energy that it deemed to comply without  
maximum permissive exposure evaluation (MPE).  
But it is desirable that it should be installed and  
operated keeping the radiator at least 20cm  
or more away from person’s body (excluding  
extremities: hands, wrists, feet and ankles).  
on the unit to cancel the connection with that  
BLUETOOTH device then display “BT AUDIO.”  
Notes  
1 Press FUNCTION  
on the unit repeatedly to  
ˎThe playback order for the system may differ from the  
playback order of the connected digital music player.  
ˎBe sure to turn off the system before removing the USB  
device. Removing the USB device while the system is turned  
on may corrupt the data on the USB device.  
ˎWhen USB cable connection is necessary, connect the USB  
cable supplied with the USB device to be connected. For  
details on connection, refer to the operation manual of the  
USB device.  
ˎIt may take time before “READING” appears after  
connecting, depending on the type of USB device  
connected.  
ˎDo not connect the USB device through a USB hub.  
ˎWhen the USB device is connected, the system reads all the  
files on the USB device. If there are many folders or files on  
the USB device, it may take a long time to finish reading the  
USB device.  
Enabling reception of AAC codec  
You can receive data in AAC codec format from a  
BLUETOOTH device. To enable reception, set up  
using the option menu.  
select the AM station.  
2 Press OPTIONS  
to display the setting menu.  
  
2 Press /  
to turn off the system.  
  
repeatedly to select “DEL LINK,”  
ˎThe system can only play MP3 files that have a file  
extension of .mp3.”  
3 Press  
/
  
and press /  
3 Press and hold FUNCTION  
.
then press  
ˎEven when file name has the .mp3” file extension, if it is  
not an audio MP3 file, playing this file may generate a loud  
noise, which could cause damage of the system.  
ˎThe maximum number of MP3 folders and files compatible  
with this system is:  
999* folders (including the root folder)  
999 files  
on the unit.  
Rewind an  
antenna cord  
wound around the  
antenna and raise  
the antenna stand.  
Stand the  
  
repeatedly to select “OK,” then  
1 Press OPTIONS  
to display the setting menu.  
4 Press  
/
antenna and  
secure it to the  
slit until it clicks.  
“STEP 9K” or “STEP 10K” appears in the display  
. When you change the interval, all the AM  
preset stations are erased.  
press  
.
  
then press  
2 Press  
/
repeatedly to select “BT AAC,”  
.
“COMPLETE” appears and all the pairing  
information is erased.  
The wide blade or the third prong are provided  
for your safety. If the provided plug does not  
fit into your outlet, consult an electrician for  
replacement of the obsolete outlet.  
  
repeatedly to select “ON” or  
3 Press  
/
Note  
.
“OFF,” then press  
250 files in a single folder  
8 folder levels (in the tree structure of files)  
If you have erased the pairing information, you cannot make  
a BLUETOOTH connection unless pairing is performed again.  
To connect with a BLUETOOTH device again, you must enter  
the passkey on the BLUETOOTH device.  
ON: to receive in AAC codec format  
OFF: to receive in SBC codec format  
Presetting radio stations  
1 Tune in the desired station.  
 

Sharp Blu ray Player BD HP22H User Manual
Sony Camcorder 3 286 590 131 User Manual
Sony Car Stereo System STR D550Z User Manual
Sony Flat Panel Television 4 168 148 131 User Manual
Sony Portable Radio SRF HM10 User Manual
Stamina Products Fitness Equipment 35 1630 User Manual
Stanton DJ Equipment RM 22 User Manual
Subaru Welding System SGX7500 User Manual
Sungale Digital Photo Frame JC155 User Manual
Tannoy Speaker iw62 TDC User Manual