Sony Video Game Console Playstation 2 User Manual

Quick Reference  
SCPH-90002  
SCPH-90003  
Before using this product, carefully read the supplied documentation and retain it for future reference.  
3-289-799-52(1)  
 
• Do not expose the console to dust, smoke or steam.  
• Do not allow liquid or small particles to get into the console.  
• Do not put any objects on the console.  
Precautions  
• Do not touch or insert foreign objects into the connectors of the console or  
accessories.  
• Do not allow dust or foreign matter to build up around the console vents. Remove  
the dust with a low-powered vacuum cleaner.  
• Set the console in a vertical or horizontal position only. When placing in the  
vertical position, use the vertical stand (for PlayStation®2) (SCPH-90110 E) (sold  
separately) that is compatible with this console. Also, do not change the position  
while the console is turned on.  
• Do not leave a disc in the console when moving or changing the position of the  
console.  
Safety  
This product has been designed with the highest concern for safety. However, any  
electrical device, if used improperly, has the potential for causing fire, electrical  
shock or personal injury. To help ensure accident-free operation, follow these  
guidelines:  
• Observe all warnings, precautions and instructions.  
• Stop use and unplug the AC power cord from the electrical outlet immediately if  
the device functions in an abnormal manner or produces unusual sounds or smells.  
• Never connect cables other than those specified in this manual to the network  
connector.  
• Contact the appropriate PlayStation® customer service helpline which can be  
found within every PlayStation® and PlayStation®2 format software manual if the  
device does not operate properly.  
• Do not touch a disc while it is spinning.  
• Do not close the disc cover in a way that could pinch your hand or fingers.  
• Adjust the settings of the DVD player according to the instructions provided before  
playing a DVD.  
• Keep the console and accessories, including cable ties and fasteners, out of the  
reach of small children.  
Use and handling  
• When operating the unit, play in a well-lit room and keep a safe distance from the  
TV screen.  
AC power cord use  
• Avoid prolonged use of the console. To help prevent eye strain, take a break of  
about 15 minutes during every hour of play.  
• Stop using the console immediately if you experience any of the following  
symptoms. If the condition persists, consult a doctor.  
– Lightheadedness, nausea, or a sensation similar to motion sickness  
– Tired, uncomfortable or aching hands or arms  
• Do not touch the plug of the AC power cord with wet hands.  
• Do not touch the console or connected accessories during an electrical storm.  
• Do not touch the console for extended periods of time while the console is turned  
on as extended contact may cause low-temperature burns.  
• To help ensure safe operation, regularly inspect the AC power cord. If damaged,  
stop use immediately and contact the appropriate PlayStation® customer service  
helpline which can be found within every PlayStation® and PlayStation®2 format  
software manual.  
– Tired, dry or aching eyes  
• Do not use the console near water.  
• Do not place the console and connected accessories on the floor or in a place where  
they may cause persons walking by to trip or stumble.  
• Do not place the console or accessories on surfaces that are unstable, tilted or  
subject to vibration.  
• Do not expose the console or accessories to high temperatures, high humidity or  
direct sunlight (use in an environment where temperatures range from 5°C to 35°C/  
41°F to 95°F).  
• Do not use a power cord other than the supplied AC power cord.  
• Check that there is no dust or lint on the mains power plug before inserting into an  
electrical outlet. If the plug becomes dirty, wipe it off with a dry cloth before  
connecting.  
• Do not allow dust or foreign matter to build up around the connectors on the  
console. Before connecting or plugging in cords or cables, also check that there is  
no dust or foreign matter on the connectors of the cords or cables, or in or on the  
socket of the wall outlet. Dust or other matter on the connectors can result in fire  
• Do not place the console in locations of poor ventilation such as small, enclosed  
areas, directly against a wall or on a thick carpet or bedding.  
3
 
or electrical shock.  
• Store discs in their cases when not in use.  
• Unplug the AC power cord from the electrical outlet before cleaning or moving the  
console, or when you do not intend to use the console for an extended period of  
time. When disconnecting, grasp the power cord by the plug and pull straight out  
of the electrical socket. Never pull by the cord and do not pull out at an angle.  
• Do not connect the AC power cord to a voltage transformer or inverter.  
• Clean discs using a soft cloth, lightly wiping from the centre outwards.  
Do not use solvents such as benzine, commercially available cleaners not intended  
for CDs or anti-static spray intended for vinyl LPs.  
• Do not use irregularly shaped discs (for example, heart- or star-shaped discs) or  
damaged, reshaped or repaired discs.  
When using software that supports the vibration function of  
Never disassemble the console or supplied accessories  
Use the PlayStation®2 console and accessories according to the instructions in the  
product documentation. No authorization for the analysis or modification of the  
console, or the analysis and use of its circuit configurations, is provided. There are  
no user serviceable components inside the PlayStation®2 console. Disassembling the  
console will void the warranty. Additionally, there is a risk of exposure to laser  
radiation as well as to electrical shock hazards.  
the analog controller (DUALSHOCK®2)  
Do not use the vibration function if you have any ailment or injury to the bones, joints  
or muscles of your hands or arms. In most cases, the vibration function can be set to  
"Off" in the options menu of the software.  
Network (except Local Area Networks)  
• A broadband Internet connection is required to connect to a network.  
• When you connect your PlayStation®2 console to a network, the Internet service  
provider may charge additional usage fees. In some cases, usage charges may be  
more than anticipated. For details, refer to the information provided in your service  
contract or contact your Internet service provider.  
When connecting the console to a plasma or projection* TV  
Do not leave a still image on the TV screen for an extended period of time, as this  
may leave a faint image permanently on the screen.  
* Except LCD screen types  
• Parents are encouraged to monitor children in online gaming to ensure safe and  
responsible Internet usage.  
Note on safety when playing DVDs or CDs  
If you set the volume too high, it may harm your hearing or damage the speakers.  
Exercise care when setting the volume.  
Connecting with an Ethernet cable  
Do not connect Ethernet cables or telephone cords of the following types to the  
network connector:  
Moisture condensation  
If the console or disc is brought directly from a cold location to a warm one, moisture  
may condense on the lens inside the console or on the disc. Should this occur, the  
console may not operate properly. In this case, remove the disc and turn off and  
unplug the console. Do not put the disc back in until the moisture evaporates (this  
may take several hours). If the console still does not operate properly, contact the  
appropriate PlayStation® customer service helpline which can be found within every  
PlayStation® and PlayStation®2 format software manual.  
• Ethernet cables not appropriate for use with a 10Base-T/100Base-TX network  
• Standard residential telephone lines  
• Any ISDN (digital) compatible phone or data line  
• PBX phone lines  
• Other "unknown" types of telephone lines  
Disc handling  
• Do not touch the disc surface when handling a disc; hold it by the edges.  
• Do not stick paper or tape onto discs and do not write on discs.  
• Fingerprints, dust, dirt or scratches on the disc can distort the picture or reduce  
sound quality. Always handle carefully and make sure discs are clean before use.  
• Do not leave discs near a heat source, in direct sunlight or in high humidity.  
Cleaning  
• For safety reasons, before cleaning the console or connected accessories, 1) turn  
off the console, 2) disconnect the mains power plug for the console from the  
electrical outlet, and 3) disconnect the Ethernet cable from the console.  
4
 
• When cleaning the console, use a soft, dry cloth. Do not use solvents or other  
chemicals or a chemically-treated dust cloth to clean the product.  
• Do not touch the lens located inside the disc cover. To help protect the lens from  
dust, keep the disc cover closed except when inserting or removing discs.  
Exterior protection  
To help prevent damage to the painted parts, follow the precautions below:  
• Do not spill liquids such as alcohol, solvents or other chemicals on the product.  
• Do not place any rubber or vinyl materials on the console exterior for an extended  
period of time.  
NOTICE FOR THE CUSTOMERS IN THE UNITED KINGDOM  
Where you see either symbol on any of our electrical products, batteries or  
packaging, it indicates that the relevant electrical product or battery should not be  
disposed of as general household waste in Europe. To ensure the correct waste  
treatment of the product and battery, please dispose of them in accordance with any  
applicable local laws or requirements for disposal of electrical equipment/batteries.  
In so doing, you will help to conserve natural resources and improve standards of  
environmental protection in treatment and disposal of electrical waste.  
Differences to previous PlayStation®2 models  
This version of the PlayStation®2 console may be different from previous models  
in compatibility with optional accessories and the method of operating game  
This product contains a battery which is permanently built-in for safety, performance  
or data integrity reasons. The battery should not need to be replaced during the  
lifetime of the product and should only be removed by skilled service personnel. To  
ensure the correct waste treatment of the battery, please dispose of this product as  
electrical waste.  
5
 
About the PlayStation®2 console documentation  
Checking the package contents  
The PlayStation®2 console documentation includes the following:  
Check that you have all of the following items. If any items are missing, contact the  
appropriate PlayStation® customer service helpline which can be found within every  
PlayStation® and PlayStation®2 format software manual.  
Quick Reference (this document)  
This document contains information on setting up and performing basic operations  
on the console, as well as safety and troubleshooting information.  
• PlayStation®2 console  
• Analog controller (DUALSHOCK®2)  
• AV cable  
• AC power cord  
• Euro-AV connector plug (supplied with SCPH-90003) ...1  
• Printed materials  
...1  
...1  
...1  
...1  
User's Guide  
This document (in PDF format) is accessed from a PC through the Internet and  
contains information on performing advanced operations on the console, technical  
specifications and other information.  
United Kingdom: uk.playstation.com/manuals  
Australia: au.playstation.com/manuals  
New Zealand: nz.playstation.com/manuals  
For up-to-date information regarding the PlayStation®2 console, visit  
6
 
 
Setting up the PlayStation®2 console  
1
Warning  
• Do not plug the AC power cord for the console into an electrical outlet until you have made all other connections.  
• The socket-outlet shall be installed near the equipment and shall be easily accessible.  
Before setting up  
• Do not place the console in locations subject to excessive cigarette smoke or dust. Cigarette smoke residue or dust build-up on the internal components, such as the lens, may  
cause the console to malfunction.  
• Make sure the TV is turned off before connecting the PlayStation®2 console.  
MEMORY CARD  
MEMORY CARD  
2
4
1
?/1 (on/standby) indicator  
Audio and video  
inputs of the TV  
AC power cord  
AV cable  
Yellow  
3
To the electrical outlet*  
VIDEO  
Analog controller  
(DUALSHOCK®2)  
5
White  
Red  
L
When the power cord is plugged into an  
electrical outlet, the ?/1 indicator will turn red to  
indicate that the console is in standby mode.  
* For some regions, the plug for the electrical  
outlet will differ from the one illustrated.  
AUDIO  
R
When using a cable other than the supplied AV cable, see "When using a cable other than the supplied AV cable" (  
page 14).  
Hint  
You can connect various USB devices to the PlayStation®2 console, but not all are compatible. Refer to the instructions supplied with the USB device for more information.  
7
 
When using the Euro-AV connector plug (SCPH-90003)  
Connect your PlayStation®2 console to the Euro-AV connector (SCART) on the TV using the Euro-AV connector plug and AV cable, making sure you match the colour-coded  
plugs of the AV cable to the matching jacks of the connector plug.  
TV  
To AV MULTI OUT connector  
Euro-AV connector plug  
To Euro-AV connector  
AV cable  
8
 
Turning the console on and off  
2
TV  
?/1 indicator  
1
Turn on the TV and select  
the appropriate input.  
MEMORY CARD  
MEMORY CARD  
2
Press the ?/1 (on/standby)/RESET button.  
The ?/1 indicator will turn green. The TV will  
then display output from the console.  
Turning off the console  
Press and hold the ?/1/RESET button for at least one second. The ?/1 indicator will turn red to indicate that the console is in standby mode.  
Hint  
In standby mode, power to the console is not completely turned off. If you will not be using the console for an extended period of time, unplug the power cord from the outlet.  
9
 
Playing content  
3
You can play games, DVD-Videos and audio CDs on the PlayStation®2 console.  
Insert the disc to start playback.  
Place the disc in the console  
with the label side facing up.  
Gently press down on the middle  
of the disc cover to close it.  
2
3
ANALOG mode button  
MEMORY CARD  
MEMORY CARD  
?/1 (on/standby)/RESET button  
1
Press the A (open) button to  
open the cover.  
Mode indicator  
For instructions on playing a game, see "Playing a game" (  
For DVDs, see "Watching a DVD" (  
For audio CDs, refer to the User’s Guide (  
page 12).  
page 6).  
Outputting Dolby Digital or DTS audio  
Connect a digital audio device to the PlayStation®2 console using a commercially available optical digital cable (for audio).  
• To output audio from DVD-Videos: From the control panel ( page 12), set "Dolby Digital" or "DTS" to "On" under (Setup) t "Audio Setup" t "Audio Digital Out".  
• To output audio from games: The setup method varies depending on the game. For details, refer to the instructions supplied with the game.  
10  
 
Using memory cards  
Playing a game  
You can save and load game data using a memory card (sold separately). You can  
also delete game data or copy game data from one memory card to another.  
You can play PlayStation®2 and PlayStation® format software on the PlayStation®2  
console.  
Memory card types  
There are two types of memory cards. Select a memory card suitable for the software  
in use.  
Starting a game  
Insert the disc to start playback.  
Memory card type  
Compatible software  
Amount of memory  
Memory card (8MB)  
(for PlayStation®2)  
(SCPH-10020 E)  
Resetting a game  
Press the ?/1/RESET button. Be careful not to accidentally press the ?/1/RESET  
button while playing a game, as doing so will cause the game to reset.  
PlayStation®2 format software  
Approx. 8 MB  
Memory card  
(SCPH-1020 E)*  
* This product is no  
longer manufactured.  
15 memory blocks  
(approx. 120 KB)  
PlayStation® format software  
Ending a game  
After saving game data, turn the console off, and then remove the disc.  
MagicGate™ is a term of copyright-protection technology developed by Sony  
Corporation.  
Using the analog controller (DUALSHOCK®2)  
Inserting a memory card  
The analog controller (DUALSHOCK®2) is equipped with pressure-sensitive  
buttons and sticks. This enables you to control game action with enhanced precision  
based on the force with which buttons are pressed or the angle at which the analog  
stick is tilted. It is also a force feedback controller with a vibration function.  
Insert the memory card into a memory card slot. Some games designate a specific  
memory card slot to use.  
Memory card slots  
Switching modes  
Depending on the game, you may need to set the controller to either digital or analog  
mode. Press the ANALOG mode button of the controller to switch to the analog  
mode (indicator: red). To return to digital mode, press the ANALOG mode button  
again. Some games make this adjustment automatically.  
MEMORY CARD  
MEMORCARD  
11  
 
 
Copying or deleting saved data  
You can delete saved data or copy data to another memory card.  
Watching a DVD  
Use directional buttons and the  
button to select items.  
You can play DVDs on the PlayStation®2 console.  
1
2
3
With no disc inserted in the console, turn on the console, and  
then insert a memory card.  
Starting a DVD  
Select "Browser", and then select the memory card you want to  
copy or delete data from.  
Insert the disc to start DVD playback.  
Select the icon for the data item, and then select "Copy" or  
"Delete".  
Follow the on-screen instructions to complete the operation.  
Operating the DVD player  
Press the SELECT button.  
Select an icon.  
Playing online games  
You can play online games by connecting the PlayStation®2 console to a network.  
The control panel  
is displayed on  
the screen.  
Items you will need  
• A network compatible PlayStation®2 game  
• Broadband Internet service  
SELECT  
button  
• A commercially available Ethernet cable  
• A memory card (8MB) (for PlayStation®2) (sold separately)  
Control panel items  
You can select the following options in the control panel.  
Icon  
Function  
Creating a network configuration  
When playing online games, insert a commercially available Ethernet cable into the  
network connector, and then create a network configuration. Refer to the instructions  
supplied with the online game for creating a network configuration.  
Menu  
Displays the DVD-Video menu  
Top Menu  
Return  
Displays the DVD-Video menu  
NETWORK connector  
Returns to the previously selected screen within the  
DVD's menu  
O
Displays and changes audio options on DVDs with  
multiple audio tracks  
Audio Options  
Angle Options  
Displays and changes viewing angles on DVDs  
recorded with multi-angle options  
Commercially available  
Ethernet cable  
12  
 
   
Icon  
Function  
Icon  
Function  
Displays and changes subtitle options on DVDs  
with subtitle options  
For DVD-RW discs (VR mode), selects Original or  
Play List content to play  
Subtitle Options  
Go To  
Original/Play List  
Clear  
Skips to the selected title, chapter or the specified  
time, and starts playback  
Clears selected numbers or playback modes  
Displays and changes options for language, picture  
quality, Parental Control level, audio, etc.  
Setup  
Hints  
• For more details on control panel items, refer to the User’s Guide (  
• The DVD player can be operated using the DVD remote control (for  
PlayStation®2) (sold separately).  
• Some control panel options cannot be selected during resume play. To select these  
options, cancel resume play by selecting x (Stop) on the control panel and then  
selecting x (Stop) again after playback is stopped.  
page 6).  
Displays the current title or chapter number, the  
elapsed time, etc.  
Time Display  
Help  
Displays the direct button functions of the analog  
controller (DUALSHOCK®2)  
Used to enter the number of a chapter you want to  
play  
Go to Chapter  
Previous/Next  
Search  
0~9  
Returns/skips to the beginning of the current,  
previous or next chapter  
/
. >  
/
/
Fast reverses/forwards playback  
Changes to playback/reverse playback in slow-  
motion  
Slow  
Play  
Starts playback  
Pauses playback  
N
X
Pause  
Stops playback. Selecting x (Stop) again after  
playback is stopped clears resume play (playback  
from the last stopping point).  
Stop  
x
Specifies a scene for playback, and starts playback  
of the scene that has been set  
A-B Repeat  
Shuffle Play  
Program Play  
Repeat Play  
Begins playback of titles or chapters in a random  
order  
Begins playback of titles or chapters in a  
programmed sequence  
Selects repeated playback of all the titles on the  
disc, or one title or one chapter  
13  
 
Parental control settings  
When using a cable other than the supplied AV  
cable  
Setting parental control restrictions  
Picture quality varies depending on the type of cable used. Use the information  
below to determine the best connection method. If you use a cable other than the  
supplied AV cable, refer to the instructions supplied with the cable.  
From the control panel, select  
(Setup) t "Custom Setup" t "Parental  
Control".  
Follow the on-screen instructions to register or enter the password. After the  
password is registered or entered, proceed through the various screens to select a  
region and parental control level.  
TV  
Cable type  
A TV with component video input connectors Component AV cable (SCPH-10490)  
A TV with Euro-AV (SCART) connector  
A TV with S VIDEO inputs  
Euro-AV Cable (SCPH-10142)  
(for SCPH-90003)  
Hints  
S VIDEO cable (SCPH-10480)  
• If you select "Other" in the region options, refer to the User's Guide (  
for a list of region codes.  
page 6)  
• For the parental control level, note that the lower the value, the stricter the  
restriction.  
Picture quality scale  
High quality  
• To clear the parental control setting, set the option to "Off".  
• To change your password, select "Change Password" from the parental control  
options and follow the on-screen instructions to complete the operation.  
x AV cable (supplied)  
x S VIDEO cable  
x Component AV cable  
Temporary override of parental control restrictions  
This scale is intended only as a reference. Depending on the product or condition of  
your TV, the picture quality may be different.  
When using the Euro-AV Cable, picture quality may vary depending on your TV's AV  
connection. For optimum picture quality, connect your Euro-AV cable to an RGB-  
compatible socket on your TV. Refer to the instructions supplied with your TV for  
details.  
Start DVD playback. When prompted by the system, select "Yes", and then enter the  
password.  
Hints  
• You cannot change the parental control setting without a password.  
• When DVD playback is stopped, the parental control level will return to its default  
setting.  
• If you forget your password, see "Troubleshooting" (  
14  
 
 
Region codes  
Compatible software  
Some discs are assigned "region codes" for each geographic sales region. This  
console can play discs with the following region codes.  
Disc  
Region code  
DVD  
PlayStation®2 format DVD-ROM  
DVD-ROM (DVD-Video)  
(SCPH-90002 only)  
4
DVD+R / DVD+RW  
DVD-R / DVD-RW (Video mode / VR mode)  
PlayStation®2 format CD-ROM  
PlayStation® format CD-ROM  
CD-DA (Audio CD)  
DVD  
(SCPH-90003 only)  
2
CD  
ALL  
PlayStation®2 format DVD-ROM  
PlayStation®2 format CD-ROM  
PlayStation® format CD-ROM  
Notes  
• Some discs may not be playable due to scratches, dust or recording problems.  
• Throughout this manual, the term "DVD-Video" is used to refer to DVD-R, DVD-  
RW (Video mode), DVD+R and DVD+RW discs.  
DVD-Videos  
This console can only play discs recorded for the PAL broadcast standard.  
• The audio CD playback feature of this product is designed to conform to the  
Compact Disc (CD) standard. Recently, some record companies have started  
marketing music discs encoded with copyright protection technologies. Some of  
these music discs do not conform to the CD standard and may not be playable on  
this product.  
• A DualDisc is a two sided disc product that contains DVD recorded material on  
one side and digital audio material on the other side. However, since the audio  
material side does not conform to the Compact Disc (CD) standard, playback on  
this product is not guaranteed.  
DVD-R, DVD-RW, DVD+R and DVD+RW discs  
• Only discs that have been finalized can be played.  
• Copy-protected video from a digital broadcast recorded on Content Protection for  
Recordable Media (CPRM) compatible DVD-RW discs or on CPRM compatible  
DVD-R discs cannot be played on this console.  
• Do not play illegally copied discs. This may cause a malfunction or damage to the  
console.  
15  
 
Accessories  
When purchasing optional accessories, be sure to purchase those that are compatible  
with this model of the PlayStation®2 console.  
About the DVD remote control (for PlayStation®2)  
When purchasing a new DVD remote control, choose model number  
SCPH-10420 E which does not include the IR receiver unit (for PlayStation®2).  
About multitaps  
Only the multitap (for PlayStation®2) (SCPH-70120 E) (sold separately) can be used  
with this console. Do not connect multitap products with other model numbers to the  
console as this may result in damage to the console.  
Accessories not compatible with this model  
The following accessories for the PlayStation® console and the PlayStation®2  
console are not compatible with this model of the PlayStation®2 console.  
Model number  
SCPH-10350 E  
SCPH-10090 E  
SCPH-1070 E  
SCPH-10040 E  
SCPH-70110 E  
SCPH-10110 E  
-
Product name  
Network Adaptor (Ethernet) (for PlayStation®2)  
Multitap (for PlayStation®2)  
Multitap  
Vertical stand (for PlayStation®2)  
Vertical stand (for PlayStation®2)  
Horizontal stand (for PlayStation®2)  
Products that use the  
S400 i.LINK connector  
16  
 
with a DVD inserted, press the ?/1/RESET button and immediately press and  
*2  
hold down the START button of the controller . The "Progressive" setting will  
Troubleshooting  
be cleared and video from the DVD will be displayed properly.  
1
2
*
*
The component AV cable (sold separately) is compatible with progressive scan.  
Connect the controller to controller port 1.  
Go through this section if you experience difficulty in operating the PlayStation®2  
console. Should any problem persist, call the PlayStation® service line at the number  
listed on your guarantee card for assistance.  
The size of the video image and the TV screen do not match.  
, If the console is connected to a widescreen TV (16:9), check the settings on the  
TV as they may override those for the console. Refer to the instructions supplied  
with your TV for details.  
Check the following items first:  
• Check that the console is turned on. Press the ?/1 RESET button to turn on the  
console (the ?/1 indicator will turn green).  
• Check that the AC power cord is fully inserted into the electrical outlet.  
• Check that the cables are correctly and securely connected.  
, Adjust the image size of the DVD to match your TV screen. Start a DVD, and  
then stop playback. Adjust the "TV Type" setting under  
Setup" in the control panel.  
(Setup) t "Screen  
, With some DVDs, image size cannot be changed.  
, Check that the console is directly connected to the video input connector of the  
TV. If there is a selector or receiver (AV amplifier) connected between the  
console and the TV, the image size cannot be changed.  
Picture  
There is no picture on the TV screen.  
, Switch the input mode of the TV as appropriate for the input connector in use on  
the console.  
, With some TVs, image size cannot be changed.  
Sound  
, There may be a problem with the cable. Try using another cable that is  
compatible with the PlayStation®2 console.  
There is no sound.  
The picture is unstable.  
, Set "Component Video Out" to "Y Cb/Pb Cr/Pr" in the System Configuration  
, Check that the TV volume is not set to "mute" and adjust the TV volume to an  
appropriate level.  
*
menu when connecting the console to the component AV inputs on a TV . Use  
the supplied AV cable to make the setting, and then connect to the TV using the  
component AV cable (sold separately).  
* When connecting the console to a TV that only supports RGB input, set "Component Video  
Out" to "RGB".  
, If the console is connected to an audio device, check the settings on the  
connected device. Refer to the instructions supplied with the device for details.  
, There may be a problem with the cable in use. Try using another cable that is  
compatible with the PlayStation®2 console.  
, Some PlayStation®2 format software titles do not support audio output from the  
DIGITAL OUT (OPTICAL) connector. When playing such software, no sound  
will be produced even if you connect using an optical digital cable for audio.  
Connect the console to the audio device using an analog AV cable, such as the  
supplied AV cable.  
, When the console is connected to a VCR or a DVD recorder, copy protection  
used by some DVDs may cause the picture to become unstable, or the picture  
may get brighter or darker. If this happens, connect the console directly to the  
TV.  
*1  
, If the console is connected to a TV or cable that does not support progressive  
scan (480p), no video will be displayed when "Progressive" is set to "On" under  
(Setup) t "Screen Setup" in the DVD player’s control panel. In this case,  
17  
 
 
There is no sound or the sound quality from the digital audio device is  
poor.  
, If the console is connected to a digital audio device you must adjust the "Digital  
Out (Optical)" setting. Turn on the console with no disc inserted, and in the  
System Configuration menu set "Digital Out (Optical)" to "On".  
The controller does not function correctly.  
, If a software title is compatible only with the analog controller  
(DUALSHOCK®2), it will not work properly with the analog controller  
(DUALSHOCK®). Use a controller that is appropriate for the software title.  
Refer to the instructions supplied with the software for details.  
, Some software specifies a specific controller port that must be used. Check that  
the controller is connected to the correct port. Refer to the instructions supplied  
with the software for details.  
, When playing DTS audio, set "DTS" to "On" in  
(Setup) t "Audio Setup"  
t "Audio Digital Out". If the connected device does not have a built-in DTS  
decoder, DTS audio cannot be played.  
, There may be a problem with the controller in use.  
Try using another controller that is compatible with the PlayStation®2 console.  
The surround effect is not produced when playing a DVD with a Dolby  
Digital audio track.  
, Check that the console is connected to an audio device with a built-in Dolby  
Digital decoder using an optical digital cable.  
The response to button operations is slow.  
, The response speed of some LCD TVs and PC displays is slow. This is not a  
malfunction.  
, To play Dolby Digital audio, set "Dolby Digital" to "On" in  
(Setup) t  
"Audio Setup" t "Audio Digital Out" in the DVD player control panel.  
The left and right analog sticks of the controller do not operate  
properly.  
, When these symptoms occur, rotate the left and right analog sticks of the analog  
controller (DUALSHOCK®2) in a large circle to adjust the sticks to an optimal  
range of operation. Be sure to rotate in a circle, not twist the sticks.  
Operation  
A disc cannot be played.  
, Check that the disc is of a type that can be played on the console.  
, Check that the disc is clean and in good condition. If the disc is dirty, wipe it  
gently with a soft cloth.  
The console does not recognize the memory card. Data cannot be  
saved or copied to the memory card.  
, Some PlayStation® format software may not perform properly on this console.  
, If the disc has a label, place the disc in the console with the label side facing up.  
, If a DVD-R or DVD-RW disc is not finalized, it cannot be played.  
, Copy-protected video from a digital broadcast recorded on Content Protection  
for Recordable Media (CPRM) compatible DVD-RW discs or on CPRM  
compatible DVD-R discs cannot be played on this console.  
, Check that the memory card is compatible with the software in use. To save or  
load PlayStation®2 format software, use a memory card (8MB) (for  
PlayStation®2) (SCPH-10020 E). To save or load PlayStation® format software,  
use a memory card (SCPH-1020 E).  
, You cannot copy saved data from PlayStation®2 format software to a memory  
card (SCPH-1020 E).  
, Check that the memory card is securely inserted into the console.  
, There may be a problem with the memory card in use. If you have another  
memory card that is compatible with the PlayStation®2 console, try switching  
memory cards.  
, Check that the region code of the DVD is correct for the console in use. Also  
check that the broadcast standard is correct.  
, The parental control feature may be set on the disc. Follow the on-screen  
instructions and temporarily raise the parental control restriction level.  
18  
 
settings on the disc, some functions may not be available even if you follow the  
procedures in this document and the User’s Guide ( page 6).  
Data saved on a memory card is corrupted.  
, While saving, loading, copying or deleting data, do not attempt any of the  
following. Doing so may cause the data to become corrupted.  
• Do not remove the memory card or the controller.  
• Do not open the disc cover.  
, Some settings cannot be changed during playback or resume play. Select  
x (Stop) in the control panel to stop playback, and then select x (Stop) again to  
clear resume play.  
• Do not reset the console.  
• Do not turn off the console.  
Network  
The console does not function properly.  
A connection to the network cannot be established.  
, Static electricity and other similar occurrences may affect the console's  
operation. Turn off the console and unplug it from the electrical outlet. Then plug  
in the console and turn it on.  
, Check that the network settings are correct. Refer to the information from your  
broadband Internet service provider and the instructions supplied with the  
software in use and adjust the settings accordingly.  
, Check that the Ethernet cable is properly connected.  
The ?/1 indicator flashes in red and the console does not work.  
, Do not use the console until the flashing stops. Placing the console in an  
extremely hot location or blocking the console's vents raises the internal  
temperature of the console, thereby preventing proper operation.  
, Check that you are using the correct type of Ethernet cable (cross cable or straight  
cable). Refer to the instructions supplied with the network device for details.  
, Check that the network device is properly connected. Also check that the settings  
of the network device in use are correct. Refer to the instructions supplied with  
the network device for details.  
You forgot your password.  
, You can clear the password using the following procedure:  
1 Insert a DVD without the parental control feature.  
2 In the control panel, select x (Stop) to stop playback, and then  
select x (Stop) again to clear resume play.  
3 In the control panel, select  
(Setup) t "Custom Setup" t  
"Parental Control" and then press the  
button.  
The screen to enter a password is displayed.  
4 Press the SELECT button on the controller, and then enter the  
number "7444" on the screen that is displayed.  
The registered password is cleared, and the screen for registering a new  
password is displayed. Enter a new password.  
The DVD does not function. Some DVD settings cannot be changed.  
, The playback status or settings of some DVDs are preset intentionally by the  
manufacturer. Because the PlayStation®2 console plays DVDs according to the  
19  
 
ii. when the original sales receipt or invoice or other proof of purchase  
(indicating the date of purchase and retailer's name) is presented together with  
the faulty Product (and has not been altered or defaced since the date of  
original purchase); and  
Guarantee  
Thank you for buying this Product. The term "Product" means the PlayStation®2  
computer entertainment system together with the accessories and/or peripherals with  
which it is packaged. This Guarantee does not cover any software whether or not  
packaged with the Product.  
iii. when the Guarantee seal and the serial number on the Product have not been  
damaged, altered or removed.  
3. You may not claim under this Guarantee when the Product is damaged as a result  
of:  
Sony Computer Entertainment Europe Ltd ("SCEE") guarantees that this Product is  
free from defects in material and workmanship that result in Product failure during  
normal usage in accordance with the terms set out in below and will, for a period of  
1 (one) year from the date of original purchase, repair or (at SCEE's option) replace  
any component part of this Product, free of charge, where it is faulty due to defective  
materials or workmanship. Replacement will be with a new or refurbished  
component or unit, at SCEE's option, which is guaranteed for the remainder of the  
original Guarantee Period.  
i. commercial use, accident, fair wear and tear, negligence, abuse, or misuse  
(including, without limitation, failure to use this Product for its normal  
purpose and/or in accordance with instructions on proper use and  
maintenance, or installation or use in a manner inconsistent with applicable  
local technical or safety standards);  
ii. use in conjunction with any unauthorised peripheral (including, without  
limitation, game enhancement devices, adaptors and power supply devices);  
iii. any adaptation or adjustment to, or alteration of, the Product carried out for  
any reason, and whether properly carried out or not;  
The benefits conferred by this Guarantee are in addition to the statutory rights and  
remedies the consumer has in the UK and Eire in respect of this Product and this  
Guarantee does not affect such rights and remedies in any way. The benefits  
conferred by this Guarantee are also in addition to other rights and remedies which  
the consumer has in law in Australia and New Zealand in respect of this Product,  
including rights and remedies available under the Trade Practices Act 1974 and State  
and Territory legislation in Australia and the Fair Trading Act 1986 in New Zealand  
and this Guarantee does not affect such rights and remedies in any way.  
iv. maintenance or repairs carried out other than by a SCEE authorised service  
facility; or  
v. use in conjunction with unauthorised software, virus infection, or fire, flood  
or other natural calamity.  
4. To the extent permitted by applicable law, this Guarantee will be your sole and  
exclusive remedy in relation to defects in this Product and all other guarantees,  
warranties, terms and conditions, express or implied by statute or otherwise, in  
respect of this Product are excluded and neither SCEE nor any other Sony entity,  
or their suppliers or authorised service facilities, will be liable for any special,  
incidental, indirect or consequential loss or damage.  
This Guarantee is given to you by Sony Computer Entertainment Europe Ltd of 10  
Great Marlborough Street, London, W1F 7LP, United Kingdom.  
IMPORTANT  
1. If you need to claim under this Guarantee, please call your local Customer Service  
helpline (listed in a PlayStation® and PlayStation®2 format software manuals) for  
return instructions and other guidance.  
If this Product needs any repair which is not covered by this Guarantee, please call  
your local Customer Service helpline for advice. If your home country is not one of  
those listed, please contact your retailer.  
2. This Guarantee is only valid:  
i. in the United Kingdom, Eire, Australia and New Zealand; and  
20  
 
Copyrights and trademarks  
About copy protection  
"
", "PlayStation", "  
", "DUALSHOCK" and "  
" are  
Attempted copying of DVDs played on this device may be prevented or restricted by  
copy protection technology contained on the DVD. Attempted recording or copying  
of DVDs for private use by the removal or circumvention of copy protection  
technology may be prohibited under applicable law.  
registered trademarks of Sony Computer Entertainment Inc.  
"SONY" and " " are registered trademarks and "MagicGate" is a trademark of  
Sony Corporation.  
This product incorporates copyright protection technology that is protected by  
method claims of certain U.S. patents and other intellectual property rights owned by  
Macrovision Corporation and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation, and is intended for  
home and other limited viewing uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or disassembly is prohibited.  
This product is manufactured under license from Dolby Laboratories. "Dolby" and  
the double-D symbol are trademarks of Dolby Laboratories.  
Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights  
reserved.  
"DTS" and "DTS Digital Out" are trademarks of DTS, Inc.  
i.LINK and i.LINK logo " " are trademarks.  
Sony Computer Entertainment Inc. uses DNAS (Dynamic Network Authentication  
System), a proprietary authentication system, to help protect copyright and security  
in connecting the PlayStation®2 console to a network. DNAS may retrieve  
information about a user's hardware and software for authentication, copy protection,  
account blocking, system, rules, or game management and other purposes. The  
information collected does not identify the user personally. The unauthorised  
transfer, exhibition, export, import or transmission of programs and devices  
circumventing its authentication scheme may be prohibited by law.  
21  
 
 
 
3
-
2
8
9
-
7
9
9
-
5
2
© 2007 Sony Computer Entertainment Inc. All rights reserved.  
 
Printed in China  

Sony Digital Camera DSC F77 User Manual
Sony Personal Computer PCV RX270DS User Manual
Sony Stereo Receiver STR DE400 User Manual
Sony Stereo System CMT BX50BTi User Manual
Sony TV Mount L5300 User Manual
StudioTech Intercom System M45 00151 User Manual
Subaru Automobile Parts EH722 User Manual
Sunwave Tech Universal Remote src 3200 User Manual
Sylvania CD Player SRCD629 User Manual
Sylvania MP3 Player SMPK6958 User Manual