Speco Technologies Network Card MCPP 100 User Manual

Congratulations on your purchase of Speco Technologies’  
MCPP-100 Phantom Power Adapter!  
Speco Technologies has leveraged over 40 years of audio industry experience to bring you the highest level of quality performing  
microphones and accessories in the industry. Speco Technologies MCPP-100 48V DC Phantom Power Supply is specially designed  
for condenser microphones. It adopts the precise electronic components and advanced production technique, all of which lend to  
the features of balanced powering for input and output, easy installation as well as user-friendly operation.  
Front Panel Functional Instruction:  
1
2
1. MIC INPUT: Microphone Input Socket  
2. AMP OUTPUT: Signal Output Socket  
Rear Panel Functional Instruction:  
1. POWER: Power Switch  
2. AC INPUT: 110V/230V 50Hz-60Hz Power Input Socket  
3. 110V/230V: Voltage Selector Switch  
Operating Instruction:  
Front View  
1. Before using the device, please check if the local operating voltage complies with 110V or 230V. Then choose the appropriate voltage.  
2. Plug the power connecting cable into the power input socket of the device and connect the other end with power source.  
3. When turning on the power switch, the power indicator lights in red.  
4. Connect the microphone to the phantom power supply by an audio cable with XLR-M & XLR-F connectors (the XLR-F end is for the  
microphone, while XLR-M is connected to the “INPUT” on the phantom power supply).  
5. If necessary, use another XLR cable and plug its XLR-M connector with the signal output socket on the phantom power supply, and connect its  
other end with the tuner or any other balanced sound equipment.  
Caution:  
1. Make sure the power source complies with the selectable voltage as the power supply indicated.  
2. Do not open the device by yourself for safety reasons, as it has high voltage inside.  
Troubleshooting:  
Situation  
Action  
The power switch is turned on but the indicator does not light  
Check if the adapter is well connected or if the fuse of the power  
input socket is damaged. Please replace it.  
No sound output  
Check if the XLR cable is plugged correctly, and adjust it  
if necessary; then check if power switch is turned on or not.  
Packing List:  
Phantom Power Supply . . . . .1 set  
Power Connecting Cable . . . .1 pc  
Specifications:  
2
Input Voltage:  
Out Voltage:  
AC 110V/230V 50Hz-60Hz  
Balanced 48V  
1
Current Consumption: About 6mA (powered by AC 220V)  
Rear View  
3
200 New Highway Amityville, New York 11701 • Outside Metro NY: 1-800-645-5516  
 

Shure Microphone M545SD User Manual
Sierra Monitor Corporation Carbon Monoxide Alarm TR 005 User Manual
Silvercrest Hair Dryer SHTC 2200 B1 User Manual
Sony CD Player 480p User Manual
Sony MiniDisc Player MZ G755 User Manual
Sony Portable Speaker SRS T80 User Manual
SRS Labs Flat Panel Television LT0G 15A1 User Manual
Standard Horizon SONAR DS41 User Manual
Sterling Dehumidifier SDA Series 25 100 User Manual
Tanaka Trimmer TPH 260PF User Manual