StarTechcom Log Splitter 2 4 8 port vga video splitter User Manual

Instruction Manual  
2/ 4/ 8 Port VGA Video Splitter - Wall Mountable  
ST122W / ST124W / ST128W  
Top View (ST124W shown)  
DE: Bedienungsanleitung - de.startech.com  
FR: Guide de l’utilisateur - fr.startech.com  
ES: Guía del usuario - es.startech.com  
IT: Guida per l’uso - it.startech.com  
Power Indicator  
Video IN port  
NL: Gebruiksaanwijzing - nl.startech.com  
PT: Guia do usuário - pt.startech.com  
Video OUT ports  
Features  
• Max. supported resolutions up to 1600 x 1200  
• Cascadable up to 3 levels  
*actual product may vary from photos  
• Supports transmission distances up to 65m /200’  
Rear View (ST124W shown)  
System Requirements  
• A computer with a VGA Card installed  
• DE-15 VGA male/female video cable  
• DE-15 VGA male/male video cable(s)  
Power Port  
Installation  
Cascaded Installation  
In a Single Unit Installation, only one video splitter is used, in turn  
limiting the number of displays to which the split signal can be  
broadcast; a Cascaded configuration on the other hand, utilizes  
multiple splitters connected to one another to providing numerous  
additional video connections (i.e. ST122W can be cascaded to  
provide up to 8 video outputs, ST124W up to 64 and ST128W up  
to 512.  
To cascade multiple splitters, use a high density DE-15 male/female  
VGA cable to connect any available Video OUT port on thehigher  
levelvideo splitter to the Video IN port of the lower level video  
splitter. You can cascade as many video splitters as there are ports  
available, however the signal will deteriorate as distance between  
the monitor and source increases.  
Please see reverse for a diagram depicting a cascaded  
configuration.  
Single Unit Installation  
1.With the video source computer powered down, use a high  
density DE-15 male/female VGA cable to connect the computer  
Video Out port to the Video IN port on the splitter.  
2.Using a high density DE-15 male/male VGA cable for each  
connection, connect the monitors to the Video OUT ports  
provided by the splitter.  
3.Connect the Power Port on the video splitter to an available  
power outlet, using the provided adapter.  
4.Power up the source computer and newly connected monitors.  
Manual Revision: 02/01/2012  
 

Sharp Speaker System MD C2H User Manual
Singer Sewing Machine 112W110 User Manual
Snapper Dust Collector TP 100 200 User Manual
Soleus Air Air Conditioner KFHHP 09 OD User Manual
Sony Camcorder Accessories 56 User Manual
Sony Cell Phone C6502 User Manual
Sony Home Theater System BDV E370 User Manual
Sony Stereo Receiver STR DE497 User Manual
Sprint Nextel Network Router U301 User Manual
Sterling Dehumidifier STT40 User Manual