Sylvania Flat Panel Television SRT902A User Manual

SRT902A  
Operation Instruction  
LCD Color digital TV receiver  
NOTE: THIS UNIT IS NOT MEANT TO BE USED IN A MOVING VEHICLE. ATSC DIGITAL  
TUNERS DOES NOT RECEIVE SIGNAL WHEN IN MOTION.  
This device complies with Part 15 of the FCC Rules.  
Operation is subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including interference  
that may cause undesired operation.  
 
I Precautions  
Storage  
1. Keep this product away from extremely hot or cold places. The  
storage temperature ranges from -40 to 60 and the working  
temperature from -5 to 40 .  
2. Do not use this product at damp environment like bathtubs, wash  
basins, kitchens, washtubs, as well as basements, swimming pools  
or similar places.  
3. Do not expose your TV set to high humidity, dust or oil smoke.  
4. Do not throw or drop this product.  
5. Do not subject this device to the inside of a case or strong vibrations,  
avoiding strong collision.  
6. Do not push on or scrub this product with sharp objects.  
Maintenance  
1. Disconnect all cables of this device at first before cleaning.  
2. Wipe the enclosure, screen and keys using soft cloth with a little  
soft detergent on.  
3. Do not use polishing cloth, abstergent, and all types of propellants or  
chemical detergents like alcohol and benzene to clean your device.  
Warning!  
1. Do not watch television programs or turn your TV set on for your  
own and others' safety.  
2. It is very dangerous to watch television programs or operate the  
TV set while driving.  
Special Notice  
1. Bright spots or dark spots may appear on the screen. This is a  
normal phenomenon associated with the active matrix display  
technology and is not a sign of malfunction. Do not attempt to  
maintain. For any failures, please turn off your TV set immediately  
and contact us or your dealer. This device integrates a great deal  
of fine electronic components. Disassembly or alternation may  
result in damages or breaks.  
2. This Unit is controlled by microcomputer. If it runs abnormally,  
please restart it.  
 
-1-  
II Accessories  
1. Car adapter  
2. AC adapter  
3. 75 ohm antenna conversion cable(screw connector)  
4. Remote control  
5. AAA type batteries  
6. AV conversion cable  
7. Telescopic antenna  
8. User manual  
* Open the package and make sure all the items are included.  
 
-2-  
III Appearance  
1. Telescopic antenna  
2. MUTE: Mute button  
3. EXIT: Exit button  
4. OK: Confirm button  
5. MODE: Mode shift button  
6. : Standby button  
7. TFT-LCD screen  
8. CH+/ : Channel Select/  
Upward button  
9. CH-/ : Channel Select/  
Downward button  
10. MENU: Menu button  
11. VOL+/ : Volume up/  
Rightward button  
12. VOL-/ : Volume down/  
Leftward button  
13. Power indicator  
Red: Standby  
Flashing green: Charging  
Persistent: Charged  
14. Remote-control receive  
window  
15. Antenna input Jack  
16. Power on/off  
17. AV Output  
18. AV Input  
19. Headphone jack  
20. DC Input  
21. SD/MMC/MS type CARD  
input port  
22. USB connect Jack  
23. Speaker  
 
-3-  
IV Description of Panel Buttons  
1. MUTE: Mute button.  
2. EXIT: Exit button.  
3. OK: Confirm button.  
4. MODE: TV/AV/External storage  
switch.  
5. : Standby button.  
6. CH+/ : Upward selection/Channel  
increasing.  
7. CH-/ : Downward selection/Channel decreasing.  
8. MENU: Menu button, press to show the main menu. When system  
enters a multilevel submenu, press to return the previous menu step  
by step.  
9. VOL+/ : Rightward selection/For volume increasing.  
10. VOL-/ : Leftward selection/For volume decreasing.  
 
-4-  
V Remote Controller Operation Instruction  
13  
1
2
14  
15  
3
16  
17  
18  
4
5
6
8
7
19  
21  
20  
22  
9
10  
12  
11  
1. (Power Switching Key): When you press this key, the TV set will  
be turned off, and press again it will be turned on.  
2. Channel Key(Number key (0-9) and ): Press relevant key directly  
when you want to change channel.  
3. VOL+/VOL- (Volume control key, left and right direction key):  
Press VOL+ to turn up the volume. Press this key to choose menu  
rightward if it is in the system menu.  
Press VOL- to turn down the volume. Press this key to choose  
menu leftward if it is in the system menu.  
4. MENU: Menu key. When you press this key, the main menu will  
display. When the system enters a multilevel submenu, press this  
key and return to previous menu step by step.  
5. : Play/Pause.  
6. : Stop.  
7. CC: Close/Open Caption.  
8. SLEEP: 240 minutes sleep shutdown settings.  
 
-5-  
9. LIST: TV program menu key. When pressing this key, you will see  
the entire program list in a program list box.  
10. FAVOR: Press to activate/deactivate my favorite Program list.  
11. SOURCE: When pressing this key, you switch state among TV, AV  
and External storage.  
12. EPG: When you press this key, the system will show the program  
guide menu(ATSC mode).  
13. (Mute Key): When you press this key, the sound will disappear,  
and press again the sound will return to normal.  
14. RETURN: Press this key to return to previous channel you were  
watching and press again to return to current channel.  
15. CH+/CH- (Program choosing key, up and down direction key):  
Press CH+ key to increase the channel. Press this key and choose  
menu upward if it is in the system menu.  
Press CH- key to decrease the channel. Press this key and choose  
menu downward if it is in the system menu.  
16. OK: Confirm button.  
17. EXIT: Press this key, exit operation and return to the program.  
18.  
/
: Previous track/Next track.  
19. MTS: Audio language switch key  
When pressing this key, you can adjust among different Audio.  
20. ZOOM: When pressing this key, you can choose among Wide,  
Zoom, Cinema, Panorama and Normal image display formats.  
21. PICT: Image Mode Key. Press this key to choose among the four  
image modes of Standard, Dynamic, Soft and Personal.  
22. INFO: When you press this key, the system will show the message  
/information of present program.  
 
-6-  
VI Basic Operation  
1. Connection of Power Supply:  
Align the power supply plug on  
AC adapter with the jack on the  
machine rear cover marked with  
DC.  
2. Connection of Antenna Cable:  
75ohm antenna conversion line  
Align one end of the attached  
antenna cable plug in the antenna  
jack onTV set and the other end  
plug in the external antenna jack.  
3. Connection of AV convert Cable:  
AV conversion cable  
Insert the external video cord into  
the yellow port of the AV convert  
cable, the left sound track into the  
white port and the right sound track  
into the red port. Then plug the AV  
convert cord in AV IN or AV OUT  
jack.  
 
-7-  
VII TV Menu Operation  
7.1. TV/AV Image QualityAdjustment  
Picture Mode  
Brightness  
Contrast  
Color  
Personal  
50  
50  
50  
50  
0
Sharpness  
Tint  
Color Mode  
Normal  
Press MENU key to enter the menu list and then press left or right key  
to enter the above list. Press up and down key to choose to enter the  
sub-list, press left and right key to adjust the numerical value or setup  
the contents, then press MENU to confirm and return to previous list.  
Press MENU again or press EXIT key on the remote controller to quit  
the sub menu list directly after the adjustment of image quality.  
Precautions  
1. There are four options of Picture Mode, which are Personal  
Standard, Dynamic and Soft.  
2. Brightness: Adjust the brightness of the image.  
3. Contrast: Adjust the black and white contrast of the image.  
4. Color: Adjust the color of the image.  
5. Sharpness: Adjust the definition of the image.  
6. Tint: Adjust the tint of the image.  
7. There are three options of Color Mode, which are Normal, Warm,  
Cool.  
7.2. Sound Adjustment  
Sound Mode  
Treble/Bass  
Personal  
English  
Prefer Language  
 
-8-  
Press MENU key to enter the menu list and then press left or right key  
to enter the above list. Press up and down key to choose to enter the  
sub-list, press left and right key to adjust the numerical value or setup  
the contents, then press Menu to confirm and return to previous list.  
Press Menu again or press EXIT key on the remote controller to quit  
the sub menu list directly after the adjustment of sound effect.  
Precautions  
1. There are five options of Sound Mode, which are Personal,  
Standard, Music, Movie and Sports.  
2. Enter the Treble/Bass for three options of Bass, Treble, Balance.  
3. Prefer Language: Set the preferred dubbing language.  
7.3. Time Adjustment  
Sleep Timer  
Time Zone  
DST  
Off  
Eastern  
Off  
12-hour  
Time Format  
Auto Sync  
Clock  
Off  
2009/07/08 8:24 PM  
Press MENU key to enter the menu list and then press left or right key  
to enter the above list. Press up and down key to choose to enter the  
sub-list, press left and right key to adjust the numerical value or setup  
the contents, then press Menu to confirm and return to previous list.  
Press Menu again or press EXIT key on the remote controller to quit  
the sub menu list directly after the adjustment.  
Precautions  
1. Sleep Timer: Set up automatic shutdown time 240 minutes.  
2. Time Zone: Set your area.  
3. DST: Open or close Daylight Savings Time.  
4. Time Format: Set time display 12 hours or 24 hours.  
5. Auto Sync: Set the system time as the program carrying time  
auto-synchnously.  
6. Clock: Adjust system time-condition.  
 
-9-  
7.4. Settings  
Menu Language  
Zoom Mode  
English  
Panorama  
0%  
Transparency  
OSD Time Out  
Closed Caption  
Restore Default  
45 Sec.  
Press MENU key to enter the menu list and then press left or right key  
to enter the above list. Press up and down key to choose to enter the  
sub-list, press left and right key to setup the contents.  
7.4.1. OSD Language Settings  
Press Up and Down Key to choose Menu Lauguage, and press Left  
and Right Key to choose among English, Frencais and Espariol.  
7.4.2. Press Up and Down Key to choose Zoom Mode, and press Left  
and Right Key to choose among Normal, Wide, Zoom, Cinema and  
Panorama.  
7.4.3. Transparency Settings  
Press UP and Down Key to choose Transparency, and press Left and  
Right Key to choose transparency level: 0%, 25%, 50%, 75%, 100%.  
7.4.4. OSD Display Time  
Press Left and Right key to choose different OSD display time  
(5-60 seconds).  
7.4.5. Closed Caption Settings  
Many TV programs contain closed caption information, and the  
audience can see the caption in words on the screen. Not all the  
channels at any time have closed caption code information.  
Press Up and Down Key to choose Closed Caption and press Left  
and Right Key or OK Key to enter below.  
CC Mode  
CC Off  
CC1  
Basic Selection  
Advanced Selection  
Servicel 1  
 
-10-  
There are three CC Modes, which are Off (closed caption off), On (closed  
caption always on when information is available) and CC on Mute (closed  
caption on when TV is in mute and closed caption off when TV is not in mute).  
Basic Selection can choose among CC1, CC2, CC3, CC4, Text1, Text2, Text3,  
Text4.  
Advanced Selection can choose among OFF, Servicel 1, Servicel 2, Servicel 3,  
Servicel 4, Servicel 5, Servicel 6.  
7.5. Program search  
TV Source  
Auto Scan  
Favorite  
CATV  
4-0  
Show/Hide  
Channel No.  
Channel Label  
Press MENU key to enter the menu list and then press left or right key to enter  
the above list. Press up and down key to choose to enter the sub-list, press  
left and right key to setup the contents.  
7.5.1 TV Source: Setting CATV andAir.  
7.5.2 Auto Scan: Press VOL+ key to autosearch channel, and the previous  
channels will be deleted at the same time.  
7.5.3 Favorite: Set up your favorit program  
Choose Favorite, press VOL+ to enter, select your favorite program by the  
yellow cursor, press "OK" to confirm, press "OK" again to cancel it, and after  
Favorite program selected, press "MENU" to confrim settings.  
7.5.4 Show/Hide: channel skip setting  
Choose Show/Hide to cancle unneeded channels, which will not be exsited in  
CH+/CH-.  
7.5.5 Channel No.: The current channel number, press VOL+/VOL- to change  
the current channel number.  
7.5.6 Channel Label: Change and edit the channel number  
Choose Channel Label, press VOL+ key to enter below, change the letter and  
number in below box to change channel number according to your favor.  
Press VOL+/VOL- to move, press CH+/CH- to change.  
 
-11-  
VIII Operations in CARD mode  
1. Memory (USB and CARD) operation  
This product supports a variety of USB memories, as well as four types  
of cards, like Multi SD, MMC, MS and MS PRO. The capacity of the USB  
memory and cards is required to be below 4GB.  
The USB memory and cards can play multimedia files in MP3/JPEG and  
AVI like playing disks.  
2. Playing multimedia files  
Press the SOURCE button to switch to the "External Storage" mode.  
Insert your USB memory or card (The device supports the following  
multimedia files MP3/JPEG and AVI etc.), press Left/Right button to select  
the required storage equipment, then press "OK" to confirm. A window is  
shown as below:  
Select the media type( PHOTO/MUSIC/VIDEO)you want through VOL+  
/VOL- , press OK key to enter, move the cursor through the up/down  
keys, press the left/right key to turn over, select the options you want,  
then press OK to play the program.  
bounce love is color bl~.mp3  
Title: love is color b~  
Clay Aiken-Mary,Did ~.mp3  
Artist: Sarah Connor  
We_are_one.mp3  
Album: Bounce  
you are not alone.mp3  
Total Size: 6733KB  
heal the world.mp3  
Sample Rate: 44100Hz  
i was made to love her.mp3  
Channel: 2  
blood on the dance floor.mp3  
Bit Rate: CBR192kbps  
black or white.mp3  
i want you back.mp3  
you ve got a friend.mp3  
invincible.mp3  
04:47  
1of 13  
 
-12-  
2.1. When in PHOTO status, press OK and then VOL- /VOL+ to  
select the corresponding function of the icon in tool bar:  
: Previous photo  
: Pause (It is Play button when in pause status)  
: Next photo  
: Zoom in  
: Repeat  
: 6-image display  
2.2. When in MUSIC status, prsse OK to play, and press VOL-  
/
VOL+ to select the corresponding function of the icon in tool bar:  
: Previous music  
: Pause (It is Play button when in pause status)  
: Stop  
: Next music  
: Repeat  
: Volume (Press OK first and then VOL- /VOL+ to adjust the  
volume to your need)  
2.3. When in VIDEO status, press OK and then VOL- /VOL+ to  
select the corresponding function of the icon in tool bar:  
: Previous movie  
: Pause (It is Play button when in pause status)  
: Stop  
: Next movie  
: Repeat  
: Volume (Press OK and then VOL- /VOL+ to adjust the  
volume to your need)  
 
-13-  
IX Before Repair  
The following phenomenons do not mean that the TV set has fault.  
Please check it according to the following methods before repair.  
Phenomenon  
Reason  
AC adapter or automobile adapter  
connecting improperly; using  
unauthorized power; the power switch is  
on the state of off.  
No image and sound  
Whether chosen the right channel; auto  
setup receiving channel again; channels  
need to be reset in a new place.  
No signal  
Whether the volume has been turned  
down at the bottom; whether the  
earphone is inserted; signals too weak;  
the mute function is working.  
No sound  
Whether the antenna has been adjusted  
properly, and maybe the signals are too  
weak.  
Mosaic in the image  
Could not receive  
signals  
Maybe the local signals are too weak;  
open antenna or cable TV preferred.  
Whether the brightness and contrast are  
proper, and please adjust again.  
Image too dark  
 
-14-  
X Technical Parameter  
Input  
ATSC frequency: 54MHz 803MHz  
NTSC receiving frequency: 55.25MHz 801.25MHz  
LCD Screen Technical Parameter  
LCD screen: 9" LCD  
Resolution: 640 H  
RGB  
234 V  
LCD screen scale: 16:9  
Capability Parameter  
Power Supply: By AC Adaptor  
AC INPUT 100-240V 50/60HZ  
DC OUTPUT 12V/2000mA  
Build-in battery: 7.4V/2000mAh  
Dimensions: 258 156 39mm  
Net Weight: About 780g  
Power Consumption: About 10W  
 
-15-  
XI Stand Assemble Instruction Manual  
Pict.-1  
Pict.-2  
Pict.-3  
Step One: Pick up the stand from the package as Pict.-1.  
Step Two: Pick out the 2 screws from the Stand Head and use later Pict.-2.  
Step Three: use the 2 screws from the step two to put into the hole of the fixed stand, later it can  
be used to lock the stand head Pict.-3.  
Pict.-4  
Pict.-7  
Pict.-10  
Pict.-5  
Pict.-8  
Pict.-11  
Pict.-6  
Pict.-9  
Pict.-12  
Step Four: Lock the fixed stand and Stand Head together as Pict.-4.  
Step Five: Loose the Stand Head's locker to move the Unit Lock easier(Pict. -5/-6/-7).  
Step Six: Make an enough place to put the stand head into unit as Pict.-8.  
Step Seven: Lock the stand into the unit as Pict.-9/10/11.  
Step Eight: Completed as Pict.-12.  
 
-16-  
Warning  
This operation instruction is only intended for reference. No further  
notice is available to any modification of all information contained  
therein. Due to continuing improvements, the features and design  
are subject to change without notice.  
Warning  
No repairable components exist in the machine. Don't try to dismantle  
and improve the TV box, and the high voltage in the machine may  
cause danger. Maintenance and adjustment of the TV box is  
subject to professionals.  
 
-17-  

Shark Vacuum Cleaner EP923F User Manual
Sharp Cable Box TU T2 User Manual
Sharper Image Electric Steamer TI150 User Manual
Snell Acoustics Speaker AMC Sub 10 User Manual
Sonic Alert Thermometer SBT425SS User Manual
Sony DVD Recorder RDR VX515 User Manual
Sony Laptop VPCW21 User Manual
Stiga Lawn Mower 43 COMBI User Manual
Sunix Computer Hardware RS 232 422 485 User Manual
TANDBERG Network Card Gatekeeper User Manual