OWNER’S
MANUAL
19-INCH COLOR TV/DVD
SRTD319
This Owner’s Manual is made of
recycled paper.
INSTRUCCIONES EN ESPAÑOL INCLUIDAS.
As an ENERGY STAR®
Partner, our company has
determined that this product meets
the ENERGY STAR® guidelines for
energy efficiency. ENERGY STAR® is
a U.S. registered mark.
If you need additional assistance for set-up or operating after
reading owner’s manual, please call TOLL FREE : 1-800-968-3429.
Please read before using this equipment
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD I N
WI RE
GROUND
CL AMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRI C
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
NEC
-
NATIONAL ELECTRICAL CODE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
S2898A
12.Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying par-
ticular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
19.Damage Requiring Service-Unplug this TV/DVD from
the wall outlet and refer servicing to qualified service per-
sonnel under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the
TV/DVD.
13.Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the TV/DVD, be sure the
antenna or cable system is grounded so as to provide some
protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements
for the grounding electrode. (Fig. A)
c. If the TV/DVD has been exposed to rain or water.
d. If the TV/DVD does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions, as improper adjust-
ment of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the TV/DVD to its normal operation.
e. If the TV/DVD has been dropped or damaged in any way.
f. When the TV/DVD exhibits a distinct change in perfor-
mance-this indicates a need for service.
14.Lightning-For added protection for this TV/DVD receiver
during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the TV/DVD due to lightning and
power-line surges.
20.Replacement Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same character-
istics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other haz-
ards.
15.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
21.Safety Check-Upon completion of any service or repairs to
this TV/DVD, ask the service technician to perform routine
safety checks to determine that the TV/DVD is in proper
operating condition.
22.Heat-This TV/DVD product should be situated away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
16.Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry-Never push objects of any kind
into this TV/DVD through openings as they may touch dan-
gerous voltage points or short out parts that could result in
a fire or electric shock. Never spill liquid of any kind on
the TV/DVD.
18.Servicing-Do not attempt to service this TV/DVD yourself
as opening or removing covers may expose you to danger-
ous voltage or other hazards. Refer all servicing to qualified
service personnel.
EN
–
–
3
0C28
PRECAUTIONS
IMPORTANT COPYRIGHT INFORMATION
LASER SAFETY
Unauthorized copying, broadcasting, public perfor-
mance and lending of discs are prohibited.
This unit employs a laser. Only a qualified service
person should remove the cover or attempt to ser-
vice this device, due to possible eye injury.
FCC WARNING- This equipment may gener-
ate or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction man-
ual. The user could lose the authority to oper-
ate this equipment if an unauthorized change
or modification is made.
CAUTION: USE OF CONTROLS OR ADJUST-
MENTS OR PERFORMANCE OF PROCE-
DURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.
LOCATION: INSIDE, NEAR THE DECK
MECHANISM.
RADIO-TV INTERFERENCE
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be deter-
mined by turning the equipment off and on, the
user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est con-
forme à la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC
ÉLECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU’AU FOND.
A NOTE ABOUT RECYCLING
This product’s packaging materials are recyclable
and can be reused. Please dispose of any materials
in accordance with your local recycling regula-
tions.
Batteries should never be thrown away or inciner-
ated but disposed of in accordance with your local
regulations concerning chemical wastes.
3) Connect the equipment into an outlet on a cir-
cuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced radio/TV
technician for help.
The serial number of this product may be found on the back of the unit. No other TV/DVD has the same serial
number as yours. You should record the number and other vital information here and retain this book as a per-
manent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
EN
–
–
4
0C28
LOCATION
SUPPLIED ACCESSORY
For safe operation and satisfactory performance of
your TV/DVD, keep the following in mind when
selecting a place for its installation:
Remote Control Unit
(PART NO.: NE210UD)
•
•
Shield it from direct sunlight and keep it away from
sources of intense heat.
•
2 AA Batteries
Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top and bottom of the unit. Do not place the unit
on a carpet because this will block the ventilation
holes.
•
•
SYMBOLS USED IN THIS MANUAL
The following symbols below appear in some head-
ings and notes in this manual, with the following
meanings
Install unit in a horizontal position.
Avoid locations subject to strong vibration.
Do not place the TV/DVD near strong magnetic fields.
Avoid moving TV/DVD to locations where temper-
•
•
•
•
TV
ature differences are extreme.
: Description refers to TV operation (in the TV mode).
DVD-V
AVOID THE HAZARDS OF
: Description refers to playback of DVD video discs
(in the DVD mode).
ELECTRICAL SHOCK AND FIRE
Do not handle the power cord with wet hands.
Do not pull on the power cord when disconnecting
it from an AC wall outlet. Grasp it by the plug.
•
•
CD
: Description refers to playback of audio CDs
(in the DVD mode).
If, by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
Do not put your fingers or objects into the
TV/DVD disc loading tray.
•
MP3
: Description refers to playback of MP3 discs
(in the DVD mode).
•
QUICK
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).
Do not place anything directly on top of the unit.
•
WARNING
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a TV/DVD
which has moisture, it may damage the DVD and
TV/DVD. Therefore when the condensation occurs
inside the unit, turn POWER on and allow at least 2
hours for the unit to dry out.
EN
–
–
5
0C28
TABLE OF CONTENTS
C IMPORTANT SAFEGUARDS . . . . . . . . . . . . .2
C PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . .4
C FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
C SEARCH FUNCTION . . . . . . . . . . . . . . . . . .23
TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . .23
TITLE / CHAPTER SEARCH . . . . . . . . . . . . .23
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . .23
MARKER SETUP SCREEN . . . . . . . . . . . . . .23
C
OPERATING CONTROLS AND FUNCTIONS . . .8
INSTALLING THE BATTERIES . . . . . . . . . . .9
C SPECIAL PLAYBACK FUNCTION . . . . . . . .24
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .24
RANDOM PLAYBACK . . . . . . . . . . . . . . . . .24
C PREPARATION FOR USE . . . . . . . . . . . . . . .10
ANTENNA/CABLE CONNECTIONS . . . . . . .10
INDOOR ANTENNA . . . . . . . . . . . . . . . . . . .10
CONNECTING TO EXTERNAL INPUT JACKS .11
C PLAYING A MP3 DISC . . . . . . . . . . . . . . . . . .25
MP3 PLAYBACK . . . . . . . . . . . . . . . . . . . . . .25
TRACK SELECTION . . . . . . . . . . . . . . . . . . .25
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . .25
RANDOM PLAYBACK . . . . . . . . . . . . . . . . .25
CONNECTING TO A STEREO SYSTEM . . . .12
CONNECTING TO AN AMPLIFIER
EQUIPPED WITH DIGITAL INPUT JACKS,
MD DECK OR DAT DECK (for DVD only) . .12
CONNECTING TO A DOLBY DIGITAL
DECODER (for DVD) . . . . . . . . . . . . . . . . . . .13
C CHANGING THE SETTINGS . . . . . . . . . . . .26
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . .26
AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . .26
STEREO SOUND MODE . . . . . . . . . . . . . . . .26
CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . .26
BLACK LEVEL SETTING . . . . . . . . . . . . . . .26
VIRTUAL SURROUND . . . . . . . . . . . . . . . . .26
TV SECTION
C SET UP FOR USE . . . . . . . . . . . . . . . . . . . . .14
CHANNEL SET UP FOR THE FIRST TIME . .14
DELETING (OR ADDING) CHANNEL . . . . .14
CHANNEL SET UP AGAIN . . . . . . . . . . . . . .15
SELECTING THE LANGUAGE . . . . . . . . . . .15
C TV OPERATION . . . . . . . . . . . . . . . . . . . . . . .16
WATCHING A TV PROGRAM . . . . . . . . . . . .16
DEGAUSSING . . . . . . . . . . . . . . . . . . . . . . . .16
PICTURE CONTROL . . . . . . . . . . . . . . . . . . .16
SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . .17
CLOSED CAPTION SYSTEM . . . . . . . . . . . .17
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . .18
C THE ON-SCREEN INFORMATION . . . . . . .27
C CHANGING THE DVD SETUP ITEMS . . . .28
LANGUAGE SETTING . . . . . . . . . . . . . . . . .28
DISPLAY SETTING . . . . . . . . . . . . . . . . . . . .29
AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . .29
PARENTAL CONTROL . . . . . . . . . . . . . . . . .30
C TROUBLESHOOTING GUIDE . . . . . . . . . . .31
DVD SECTION
C ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . .20
C MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .33
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . .20
DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . .20
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . .33
C SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . .34
C PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . .21
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . .21
GENERAL FEATURES . . . . . . . . . . . . . . . . . .21
DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . .21
TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . .21
RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
STEP BY STEP PLAYBACK . . . . . . . . . . . . .22
FAST FORWARD/REVERSE SEARCH . . . . .22
SLOW FORWARD / SLOW REVERSE . . . . .22
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
C WARRANTY . . . . . . . . . . . . . . . . . . .Back Cover
EN
–
–
6
0C28
FEATURES
TV Mode
DVD Mode
¡Dolby Digital sound
181 channel capability PLL frequency synthesiz-
er tuner with direct station call
(A converter may be necessary to view scrambled
cable channels.)
Infrared remote control
Trilingual on screen menu display selectable in
English, Spanish, or French
•
This player can handle Dolby Digital surround sound
having 5.1 channels when connected to a Dolby Digital
decoder.
¡Still/fast/slow/step playback
Various playback modes are available including still pic-
tures, fast forward/reverse, slow motion and step frames.
•
•
¡Random playback for audio CD and MP3
This player can shuffle the order of tracks to play them in
random order.
¡Sleep Timer
T
he Sleep Timer function enables you to shut off the power
without pressing POWER after a desired time period.
¡Program playback for audio CD and MP3
You can program the order of tracks to play them in any
desired order.
¡Closed Caption Decoder
You may view specially labeled (cc) TV programs,
movies, news, etc. with either a dialogue caption or text
display added to the program.
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡Auto Shut Off Function
If there is no air signal input from the antenna terminal and
no operation for 15 minutes, the TV will turn itself off
automatically.
¡Screen saver/Auto power-off functions
The screen saver program starts when there is no input
from the player for five minutes in the stop mode. When
the screen saver program is activated for 15 minutes, the
power is automatically turned off.
¡V-CHIP
Enables parents to prevent their children from watching
inappropriate material on TV.
¡Subtitles in a desired language
You can select a desired language for the display subtitles,
if that language is available on a disc.
¡Selecting a camera angle
You can select the desired camera angle, if a disc contains
sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select the desired audio language and sound mode,
if different languages and modes are available on a disc.
¡Parental lock
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Automatic detection of discs
This player automatically detects if the loaded disc is
DVD, audio CD or MP3 on disc.
¡On-screen display
Information about the current operation can be displayed
on a TV screen, allowing you to confirm the currently
active functions (such as program playback), on the TV
screen using the remote control.
¡Search
Chapter search / Title search / Track search / Time search
¡Repeat
Chapter / Title / Track / Group / All / A-B
¡Zoom
Magnified screen can be displayed.
¡Marker
The part designated by user can be called back.
¡Resume Play
User can resume to playback from the part at which the
play was stopped.
¡Virtual Surround
¡Bit rate indication
¡DRC (Dynamic range control)
You can control the range of sound volume.
EN
–
–
7
0C28
OPERATING CONTROLS AND FUNCTIONS
[Fig. 1]
TV/DVD FRONT PANEL
AUDIO
POWER
VOLUME
CHANNEL
VIDEO
L
R
STOP
SKIP
PLAY SKIP
PAUSE
OPEN/CLOSE
HEADPHONE
SEARCH
1
2
3
4
5
6
7
8
9 10 11 12 13 14
9. SKIP H Button
[Fig. 2]
REMOTE CONTROL
Plays back from the beginning of the current chapter
or track.
SEARCH (REV) E Button (Front Panel)
During playback or in the pause mode, press and
hold button down for a few seconds to change reverse
playback speed.
OPEN/
CLOSE
POWER PICTURE SELECT
4
13
10. PLAY Button
34
36
1
4
2
5
8
0
3
6
Starts playback of the disc contents.
Press to change to DVD mode when TV mode.
CH.
6
16
11. SKIP G Button
7
SLEEP
9
+100
Plays back from the beginning of the next chapter or
track.
VOL.
5
+10
17
SEARCH (FWD) D Button (Front Panel)
During playback or in the pause mode, press and
hold button down for a few seconds to change forward
playback speed.
SKIP
ZOOM
MUTE
9
11
10
35
19
18
PLAY
STOP
REV
FWD
12. PAUSE Button
Pauses the current disc operation.
8
DISC
MENU
PAUSE SLOW
DISPLAY
13. OPEN/CLOSE Button
12
23
33
Press to insert discs into or remove them from the
tray.
32
31
30
ENTER
14. HEADPHONE Jack
To connect headphone (not supplied) for personal
listening.
SETUP
TITLE
RETURN
20
21
22
CLEAR SEARCH MODE REPEAT
A-B
29
15. MODE Button
AUDIO SUBTITLE ANGLE
MODE
Activates program playback or random playback mode
when playing CDs or MP3.
15
24
25
28
27
26
16. Number Button
TV Mode:
Press two digits to directly access the desired chan-
nel.
1. Disc loading tray
2. VIDEO input Jack
Remember to press a "0" before a single digit chan-
nel.
Connect to the video output jack of a video
camera or VCR.
3. AUDIO L/R input Jacks
Connect to the audio output jacks of a video
camera or VCR.
+100 Button–
Press to select cable channels which are equal or
greater than number 100.
DVD Mode:
Press to enter the desired number.
+10 Button–
4. POWER Button
Press to enter the desired numbers which are equal
or greater than number 10.
Press to turn the power on and off.
5. VOLUME K/L (VOL. m/n) Buttons
Press to control the volume level for the DVD and TV.
6. CHANNEL K/L (CH. K/L) Buttons
Press to select memorized channel.
Press to change to TV mode when DVD mode.
7. Remote Sensor Window
8. STOP Button
Stops operation of the Ddioswcn.load from Www.Somanuals.com. All Manuals Search And Download.
EN
–
–
8
0C28
[Fig. 3]
TV/DVD REAR VIEW
ANT.
L
AUDIO OUT
R
VIDEO OUT
COAXIAL
38
39
40
37
17. SLEEP Button
32. Arrow Buttons
Press SLEEP to display the sleep timer and start the
function. The shut off time can be determined by the
number of times you press this button. (0, 30, 60,
90, or 120 minutes)
TV Mode:
Press to select a setting mode from the menu on the
TV screen.
Press to select or adjust from a particular menu.
DVD Mode:
18. REV h Button
Use when making settings while watching the
display on a TV screen.
Press to view the DVD picture in fast reverse motion.
Press PAUSE, then press this button to begin slow
motion playback. Press this button repeatedly to change 33. DISC MENU Button
the reverse speed of slow motion.
Displays the menus in the DVD.
FWD g Button
34. SELECT Button
Press to fast forward the Disc. Press PAUSE, then
press this button to begin slow motion playback. Press
this button repeatedly to change the forward speed of
slow motion.
Press to change to TV mode, external input mode or
DVD mode.
NOTE: When you select the DVD mode by this
button, press PLAY or OPEN/CLOSE first.
Otherwise, the DVD features are not operated.
19. ZOOM Button
Expands the picture to fill the entire screen.
20. SETUP Button
35. MUTE Button
Press to enter or exit the TV menu or DVD setup
mode.
Press MUTE to turn off the sound
portion of the TV program. (Volume level display
turns LIGHT RED from LIGHT BLUE.) Press
MUTE again or press VOL. m or n to restore
sound.
21. TITLE Button
Displays the title menu.
22. CLEAR Button
Resets a setting.
36. PICTURE Button
Press to enter picture adjustment mode.
23. DISPLAY Button
TV Mode:
37. Power cord
Press to display the channel number on the screen.
If you press it again, the channel number will disap-
pear.
Connect to a standard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect to
a standard AC outlet.
DVD Mode:
Displays the current status on the TV screen for
checking purposes.
38. AUDIO L/R output Jack
Connect to the analog audio input of an external
amplifier or decoder.
24. SEARCH MODE Button
Press to locate a desired point.
39. COAXIAL digital audio out Jack (DVD Audio
Only)
25. AUDIO Button
Connect to the digital input of an external
amplifier or decoder.
Press to select a desired audio language or sound
mode.
40. ANT. in Jack
26. SUBTITLE Button
Connect to an antenna, cable system, or satellite sys-
tem.
Press to select a desired subtitle language.
27. REPEAT Button
Repeats playback of the current disc, title, chapter
or track.
INSTALLING THE BATTERIES
28. ANGLE Button
1)Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2)Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
Press to change the camera angle to see the sequence
being played back from a different angle.
29. A-B REPEAT Button
Repeats playback of a selected section.
30. RETURN Button
Returns to the previous operation.
3)Replace the cover.
31. ENTER Button
Press to accept a setting.
NOTES
¡Do not mix alkaline and manganese batteries.
¡Do not mix old and new batteries.
EN
–
–
9
0C28
PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
From Cable System or
Satellite Box or
Cable Box
(Not supplied)
VHF/UHF Antenna
(Not supplied)
OUT
IN
Satellite Dish
VHF Antenna
(Not supplied)
UHF Antenna
(Not supplied)
From
Cable System
ANT.
L
AUDIO OUT
R
VIDEO OUT
COAXIAL
VHF/UHF
Combiner
(Not supplied)
or
or
ANT.
or
75-ohm Coaxial
Cable (Not supplied)
Flat twin-lead cable
[Fig. 4]
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
Bent pin
NOTE:
Before plugging the an antenna into the ANT. IN jack of the TV/DVD, check that
the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin
into the ANT. IN jack of the TV/DVD.
Cable
Plug
(Needs to be straightened)(Straight pin)
VHF/UHF COMBINED ANTENNA
A VHF UHF 75 ohm combination antenna can be
connected to ANT terminal.
CABLE WITH CONVERTER/DESCRAM-
BLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown here.
Channel selection must be made with the converter
box or satellite box. This means that channels cannot
be changed using the TV/ DVD Remote Control.
TO VIEW A SCRAMBLED/UNSCRAMBLED
CHANNEL
1.Set the TV/DVD channel selector to the output
channel of the Cable Converter Box or Satellite
Box. (Ex. CH3)
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor
antenna.
CABLE WITHOUT CONVERTER/
DESCRAMBLER BOX
Use this connection if your cable system connects
directly to your TV/DVD without a converter box.
Use the TV/ DVD Remote Control to select channels.
2.Select the channel to view at your Cable Converter
Box or Satellite Box.
INDOOR ANTENNA
The Indoor Antenna (not supplied) is detachable. Insert the stem of the antenna into
the hole on the upper-back portion of the TV/DVD. Connect the Indoor Antenna to
the TV/DVD as shown in the diagram. For the best reception, fully extend the
Indoor Antenna and make the necessary adjustments. (Avoid touching the top sec-
tion when adjusting.)
Indoor Antenna
(Not supplied)
NOTE:
The connection of an Indoor antenna may not always give acceptable TV reception.
ANT.
ANT.
L
AUDIO OUT
R
V
I
D
E
O
O
U
T
COAXIAL
[Fig. 5]
EN
–
–
10
0C28
CONNECTING TO EXTERNAL INPUT JACKS
[Front of the TV/DVD]
When you watch a program recorded on an another
VIDEO
L
AUDIO
R
POWER
source (VCR or video camera), use the audio/video
input jacks on the front of the TV/DVD.
Connect the audio/video output
[Another source]
jacks of another source to the
AUDIO L/R and VIDEO jacks of
this TV/DVD. Then press SELECT
until "AUX" appears on the screen.
NOTE:
AUX
To the audio
output jacks
VIDEO
L
AUDIO
R
When you connect a monaural VCR (another
•
etc.
source) to this TV/DVD, connect the Audio output
jack of the monaural VCR (another source) to the
AUDIO L jack of this TV/DVD. The audio will
output in both L and R channel equally.
To the video
output jack
[Fig. 6]
Audio/Video
cables
(not supplied)
EN
–
–
Download from Www.Somanuals.co1m1. All Manuals Search And Download.
0C28
CONNECTING TO A STEREO SYSTEM
ANT.
Stereo system
L
AUDIO OUT
R
VIDEO OUT
COAXIAL
L
AUDIO OUT
R
VIDEO OUT
COAXIAL
To Right (red) and Left (white) AUDIO OUT jacks
To ANALOG AUDIO INPUT jacks
[Fig. 7]
NOTES:
Be sure to turn off the power to all components in the system before connecting another component.
Refer to the Owner's Manuals for your stereo system and any other components to be connected to the
TV/DVD.
•
•
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK (for DVD only)
Use an audio coaxial digital cable available at retail for the audio connections.
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
ANT.
L
AUDIO OUT
R
VIDEO OUT
IAL
To COAXIAL DIGITAL
AUDIO INPUT jack
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
[Fig. 8]
NOTES:
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
•
Be sure to turn off the power to all components in the system before connecting another component.
Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set-
tings may generate noise distortion, and may also damage the speakers. (See page 29 to set DOLBY
DIGITAL to OFF.)
•
•
•
EN
–
–
12
0C28
|