Talkswitch Two Way Radio TS 100 User Manual

TM  
Setting up TS 100 Phones with TalkSwitch  
Quick Guide  
Factory Presets  
The following table shows you the factory settings for your unit:  
Display  
Setting  
Language  
English  
LCD Contrast  
Area Code  
LDS Code  
3
no setting  
1
Flash  
Access Code  
- (no Hunt Group Selected)  
Initial Setup  
After the adapter is connected, the display will show as indicated below for setting.  
1. [SET LANGUAGE] appears on the display. Press the REVIEW UP ( ) button to select  
the language. E - English, F - French, S - Spanish, and then press the DIAL button to  
confirm the selection.  
E
SET LANGUAGE  
2. When [LCD CONTRAST] appears, press the REVIEW UP ( ) button to set the contrast  
darker, and then you can press the REVIEW DOWN ( ) button to set the contrast back  
to the preset.  
2
LCD CONTRAST  
3. When [SET AREA CODE] appears, use the REVIEW UP ( ) BUTTON and the REVIEW  
DOWN ( ) button to set your local area code:  
- - -  
SET AREA CODE  
REVIEW UP ( ) button - to change the digit from -, 0 to 9.  
REVIEW DOWN ( ) button - to move to the next digit.  
When you are finished setting the local area code, press Dial.  
4. When [SET LDS CODE] appears, press the REVIEW UP ( ) button to change the long  
distance code from -, 0, 1, 2, -9.  
1
SET LDS CODE  
When you are finished, Press DIAL. The display will indicate as shown (Stand-by Screen)  
and be ready to receive incoming calls. You have to set the LDS code as 1 when you  
are in the USA or Canada.  
5. When [SET ACCESS CODE] appears, use the REVIEW UP ( ) button and the REVIEW  
DOWN ( ) button to set your access code. The Code can range from _ to 9. The  
Access Code is used to obtain an outside line when using TalkSwitch (without ‘Direct Line  
Access’ enabled) and some Centrex applications. This feature can be used with Caller ID  
and Memory Locations. If you do not have ‘Direct Line Access’ enabled, then set this  
code to ‘9’.  
What is Direct Line Access? Direct Line Access allows you to make external calls  
without having to dial ‘9’ first. Note: To access some of the TalkSwitch features with Direct  
hold / flash  
Line Access enabled, you must press the  
button first. See the Using TS 100  
Phones with TalkSwitch Quick Guide for more details.  
6. The time and date are automatically set when a caller ID (CID) number is received. The  
unit will keep the current time accurately, and is updated each time a CID number is  
received.  
Reprogramming  
After you have set up the unit completely for the first time, you can use the MENU button to  
review or reprogram the Language, Contrast, Area Code, LDS Code or Access Code. Use the  
REVIEW UP ( ) and REVIEW DOWN (  
to scroll through the settings.  
) buttons to set the options and the DIAL button  
copyright Centrepoint Technologies Inc. 2005 document #: CT.TS005.5xx.EN - 01 (June 2005)  
 

Sharp PDAs Smartphones EL 6990 User Manual
Soleus Air Air Conditioner GM WAC 15ESE C User Manual
Sony Camcorder PMW 500 User Manual
Sony CRT Television KP 48V80 User Manual
Sony Indoor Furnishings 210 User Manual
Sony Microcassette Recorder CFD G500L User Manual
Sony Personal Computer VGC LS30 User Manual
Sony Projector LMP H160 User Manual
Sony Speaker XS V6950H User Manual
Sony Stereo System CDP CX270 User Manual