N2953
©2008 Manufactured or imported by Targus Group International,
Inc. (for U.S. sales: 1211 North Miller Street, Anaheim, CA 92806
USA, for Australia sales: Targus Australia Pty. Ltd., 117-119 Bowden
Street, Meadowbank, NSW 2114 Australia). All rights reserved.
Targus is either a registered trademark or trademark of Targus Group
International, Inc. in the United States and/or other countries. Features
and specifications are subject to change without notice. Mac, the Mac
logo, Mac OS, Keynote, iPhoto, iTunes, Safari, iWork and iLife are
trademarks of Apple Inc., registered in the U.S. and other countries.
PowerPoint and Excel are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
Acrobat is either a registered trademark or trademark of Adobe Systems
Incorporated in the United States and/or other countries. The Bluetooth
word mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by Targus is under license. All trademarks and registered
trademarks are the property of their respective owners. This product
and its various features are protected under patents US7298362,
TWM249131, CNZL03275852.9, JP3132101, DE202007005619.2,
USER GUIDE
®
Bluetooth Presenter
CNZL200620131443.5,
JP3232194,
DE202007004256.6,
DE202007006210.9. Other United States and foreign patents pending.
®
ONE YEAR LIMITED WARRANTY
for Mac
Bluetooth® Presenter
Bluetooth® Presenter
• Turn on the presenter by pressing the on/off switch located on the side.
Installing the Batteries
• On - Press 3 seconds
to turn on the presenter
• Please use the two AA batteries that are included.
(LED blink once)
• Install two AA batteries into the presenter with the correct polarity.
Refer to the polarity signs inside the battery compartment.
• Off - Press 3 seconds
to turn off the presenter
(LED blink twice)
NOTE: PLEASE REMOVE THE PROTECTIVE PLASTIC FILM ON THE TOUCH SCROLL BEFORE
USING THE DEVICE.
1
2
3
Low Battery Power Indicator
NOTE: WHEN THE BATTERY POWER IS LOW, THE TOUCH SCROLL WILL FLASH RED.
PLEASE REPLACE THE BATTERIES.
When 60 minutes of power remains, a red indicator light will glow for 8
seconds.
When only 30 minutes of power remains, the red indicator light will blink
continuously.
• Slide the battery cover back into position
NOTE: THE DEVICE WILL GO INTO SLEEP-MODE AFTER 60 MINUTES OF IN-ACTIVITY.
TO RE-ACTIVATE, PRESS ANY KEY ON THE DEVICE AND WAIT 1 TO 4 SECONDS.
1
3
2
ꢁ
ꢂ
Bluetooth® Presenter
Bluetooth® Presenter
Using the device - Mouse Mode
Using the device - Presenter Mode
9
6
9
6
5
1
8
2
5
1
8
2
7
3
7
3
4
4
1
2
3
4
5
6
Mode switch button (Presenter mode)
Previous slide
1
2
3
4
Mode switch button (Mouse mode)
Left mouse button
Next slide
Right mouse button
Laser pointer trigger - Press to activate the laser pointer
Blank Screen
Touch Scroll - Navigate the mouse cursor
Laser pointer trigger - Press to activate the laser pointer
Slideshow Start - Press once to begin
5
6
7
8
Programmable button (requires CD installation)
Programmable button (requires CD installation)
Volume up & Volume down
Stop - Press and hold for 2 seconds to stop the slide show
Volume up & Volume down
7
8
On - Press 3 seconds to turn on the presenter (LED blink once)
Off - Press 3 seconds to turn off the presenter (LED blink twice)
On - Press 3 seconds to turn on the presenter (LED blink once)
Off - Press 3 seconds to turn off the presenter (LED blink twice)
9
Laser light emitter
9
Laser light emitter
ꢃ
ꢄ
Bluetooth® Presenter
Bluetooth® Presenter
Initial Configuration
3. Bluetooth Setup Assistant will begin. Please follow the on-screen
instructions.
Before you can begin using your Bluetooth presenter, you will first need to
perform some initial setup steps.
NOTE: PLEASE USE THE LATEST BLUETOOTH DEVICE DRIVER. INSTRUCTION
SCREENS MIGHT VARY DEPENDING ON THE VERSION OF YOUR BLUETOOTH DEVICE
DRIVER.
Bluetooth Software: Mac
1. Go to the Bluetooth icon located on your desktop or in the system bar and
click the icon to begin setup. Select “Turn Bluetooth On” to activate the
Bluetooth function on your Mac.
4. Select “mouse” and click continue to proceed with setup.Your presenter will
need to be in “discovery” mode to connect. First, power on the presenter
by pressing the “on/off” key for 3 seconds. Then, within 3 seconds after
the power is on, press any button once (except “on/off” button) to enter
into discovery mode. The LED in the Touch Scroll will blink continuously to
indicate “discovery” mode is enabled.
2. Scroll down the list and select “Set up Bluetooth Device...”
ꢅ
ꢆ
Bluetooth® Presenter
Bluetooth® Presenter
5.Your computer will begin to search for the presenter. Once the presenter is
found, it will show up in the list. Highlight your presenter and press continue.
7. Congratulations.Your Bluetooth presenter is setup and and ready to use.
You can choose to setup another device or click Quit to exit setup.
6. The Bluetooth presenter will now begin pairing. Click continue to proceed.
ꢇ
ꢈ
Bluetooth® Presenter
Bluetooth® Presenter
After the software is successfully installed, restart your computer to finish
installing the software.
Installing Software for Programmable Buttons
Installing the software enables configuration of the programmable buttons.
The software is located on the included CD
or
A Targus icon will appear in the System Preferences window.
The latest software (Model # AMP11) can be downloaded from the official
Double click the setup icon to launch the installation software.
Follow the on-screen instructions to complete the installation.
ꢀ0
ꢀꢀ
Bluetooth® Presenter
Bluetooth® Presenter
Click the arrows on the right-side of the drop down lists to configure each
button.
Programming the Buttons
Click onto the Targus logo to launch the device application.
Click to highlight the image of the device and then press “Setup Device” to
launch the configuration software.
NOTE: PLEASE SELECT THE CORRECT “PRESENTATION SOFTWARE” IN ORDER FOR
THE PRESENTER KEYS TO FUNCTION PROPERLY.
Each button can be programmed to any of the following types of functions:
Default Action
Set the buttons to a specific function.
Set the buttons to load an AppleScript
Run AppleScript
Set the buttons to launch specific application installed
in the computer.
Launch Application
Perform key strokes Set the button to recall key strokes.
Predefined functions Set the button to map pre-set actions
Close the application window to apply the changes.
ꢀꢁ
ꢀꢂ
Bluetooth® Presenter
Bluetooth® Presenter
Technical Support
Troubleshooting
For technical questions, please visit:
The Presenter is not working.
US
• Make sure the batteries are installed correctly. The positive (+) and
negative (-) ends of each battery must match the positive (+) and negative (-)
connections in the battery compartment.
Australia
Email: [email protected]
Telephone: 1800-641-645
Telephone: 0800-633-222
New Zealand
• Make sure the batteries are charged. Replace if necessary.
• Verify that the computer is Bluetooth enabled.
Product Registration
Targus recommends that you register your Targus accessory shortly after
purchasing it. To register your Targus accessory, go to:
• Verify that the device drivers are installed:
You will need to provide your full name, email address, country of residence and
product information.
1. Click “Apple Logo --> System Preference --> Hardware --> Bluetooth”
Warranty
2. Check under “Bluetooth Devices” that a “Targus Bluetooth Presenter ” is
installed.
Targus warrants this product to be free from defects in materials and workmanship
for one year. If your Targus accessory is found to be defective within that time,
we will promptly repair or replace it. This warranty does not cover accidental
damage, wear and tear, or consequential or incidental loss. Under no conditions
is Targus liable for loss of, or damage to, a computer or other device(s); nor loss
of, or damage to, programs, records, or data; nor any consequential or incidental
damages, even if Targus has been informed of their possibility. This warranty does
not affect your statutory rights.
• Paired devices are always displayed in “Bluetooth” windows, even if the
mouse is out of range or not powered up.
Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may
cause undesired operation.
ꢀꢃ
ꢀꢄ
Bluetooth® Presenter
Bluetooth® Presenter
FCC Statement
Tested to Comply
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the equipment and receiver;
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected;
• Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not authorized by the party responsible for compliance could
void the user’s authority to operate this product.
Declaration of Conformity
Hereby, Targus, declares that this device is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
ꢀꢅ
ꢀꢆ
|