Philips 3121 233 42852 User Manual

Color TV  
Quick Use and Setup Guide  
CONTENTS  
IMPORTANT  
NOTE: This owner's manual is used with several  
different television models. Not all features (and  
drawings) discussed in this manual will necessar-  
ily match those found with your television set.  
This is normal and does not require that you con-  
tact your dealer or request service.  
Important Notice/Warning . . . . . . . . . . . . . . . . . . . . .1  
How to Use the Installation Features . . . . . . . . . . .3-4  
Using the Onscreen menu . . . . . . . . . . . . . . . . . . . . .3  
Using the Language Control . . . . . . . . . . . . . . . . . . .3  
Setting the Tuner Mode Control . . . . . . . . . . . . . . . .3  
How to Automatically Program Channels . . . . . . . . .3  
How to Add and Delete Channels . . . . . . . . . . . . . . .4  
Glossary of Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Making Basic TV Connections  
Basic Cable TV Connections . . . . . . . . . . . . . . . . . .1  
Basic Antenna TV Connections . . . . . . . . . . . . . . . .1  
Basic TV Operation . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Remote Battery Installation . . . . . . . . . . . . . . . . . . .2  
Remote Control Button Descriptions . . . . . . . . . . . .2  
WARNING: TO PREVENT FIRE OR SHOCK  
HAZARD DO NOT EXPOSE THIS UNIT TO  
RAIN OR EXCESSIVE MOISTURE.  
BASIC TV CONNECTIONS  
Direct Cable Connection:  
CABLE TV  
AC Power  
Wall Outlet  
our Cable TV input into your home may be a single (75 ohm)  
Ycable or a converter box installation. In either case, the con-  
nection to the TV is very easy. Follow the steps below to connect  
your cable signal to your new television.  
Cable signal  
coming from  
Cable Company  
(Round 75  
1
2
coaxial cable)  
75  
If your cable signal comes directly from a round 75coaxial  
cable use the following steps:  
Power Plug  
L
from back of TV  
AUDIO  
Connect the open end of the round Cable Company sup-  
R
plied cable to the 75input on the TV. Screw it down finger  
tight.  
AV out  
CVI  
AV in  
1
2
Jack Panel Back of TV  
Plug the television in to the wall outlet and turn the TV on.  
Refer to the AUTO PROGRAM feature to program all the  
available channels on your cable signal.  
Cable Box Connection:  
If your cable signal comes from a cable box, use the following  
steps:  
Jack Panel Back  
of Cable Box  
4
3
Connect the open end of the round Cable Company sup-  
plied cable to the cable signal IN(put) plug on the back of  
the Cable Box.  
3
4
5
INPUT  
OUTPUT  
Using a separate round coaxial cable, connect one end to the  
OUT(put) plug on the back of the Cable Box.  
AC Power  
Wall Outlet  
Round 75Ω  
Coaxial Cable  
Connect the other end of the round coaxial cable to the  
75input on the back of the television. Screw it down finger  
tight.  
Jack Panel Back of TV  
5
6
Plug the television in to the wall outlet and turn the TV on.  
Refer to the TUNER and AUTO PROGRAM features on  
page 3 of this Quick Use Guide. TUNER should be set to the  
CABLE option. AUTO PROGRAM can be set to program all  
the available channels on your cable signal into the televi-  
sion’s memory.  
Cable Signal IN from  
the Cable Company  
75  
6
L
AUDIO  
R
NOTE: If your cable box uses  
separate Audio Outputs, the  
connection will have to be  
made at the TV’s Audio L & R  
AV in jacks.  
AV out  
CVI  
AV in  
Power Plug  
from back of TV  
ANTENNA TV  
Antenna Connection:  
combination antenna receives normal broadcast chan-  
Anels (VHF 2–13 and UHF 14–69). Your connection is  
easy because there is only one 75(ohm) antenna plug on  
the back of your TV, and thats where the antenna goes.  
Outdoor or Indoor Antenna  
(Combination VHF/UHF)  
The combination antenna receives normal  
AC Power  
Wall Outlet  
broadcast channels 2-13 (VHF) and 14-69 (UHF).  
If your antenna has a round cable (75 ohm) on the end,  
then you're ready to connect it to the TV.  
300 to 75-ohm  
Adapter  
1
1
2
If your antenna has flat, twin-lead wire (300 ohm), you  
first need to attach the antenna wires to the screws on a  
300- to 75-ohm adapter.  
3
Jack Panel Back of TV  
Push the round end of the adapter (or antenna) onto the  
75(ohm) plug on the back of the TV. If the round end of  
the antenna wire is threaded, screw it down finger tight.  
Twin  
Lead Wire  
2
3
75  
L
Plug the television in to the wall outlet and turn the TV  
on. Refer to the TUNER and AUTO PROGRAM features on  
page 3 of this Quick Use Guide. TUNER should be set to the  
ANTENNA option. AUTO PROGRAM can be set to program  
all the available channels on your cable signal into the televi-  
sion’s memory.  
AUDIO  
Power Plug  
from back of TV  
R
AV out  
CVI  
AV in  
Round 75Ω  
Coaxial Cable  
from Antenna  
3121 233 42852  
HOW TO USE THE INSTALLATION FEATURES  
PICTURE MENU  
SOUND MENU  
ONSCREEN MENU  
eatures for your television can be adjusted from within a  
FMENU shown on the TVs screen. A MENU is nothing more  
than an 0nscreen list of features. Some of the features have sub-  
menus but each MENU item can be adjusted or activated (deacti-  
vated) by viewing the screen and simply pressing the proper button.  
Menu  
Picture  
Sound  
Features  
Install  
Main  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Treble  
Bass  
Balance  
AVL  
Incr. Surr  
More...  
2
More...  
4
3
1
Press the MENU button on the remote or the  
Install/Menu buttons (Volume +, –) on the TV simultane-  
ously to show the onscreen menu.  
1
2
3
4
FEATURE MENU  
INSTALL MENU  
VOL  
Press the CURSOR UP or DOWN buttons on the remote  
(or the Volume +, – buttons on the TV) to pick any of the  
onscreen menu features.  
Menu  
Picture  
Sound  
Features  
Install  
Menu  
Picture  
Sound  
Features  
Install  
Language  
Timer  
AutoLock  
Tuner Mode  
Auto Program  
Channel Edit  
Press the CURSOR RIGHT or LEFT buttons on the  
remote (or Channel  
or  
buttons on the TV) to adjust  
any highlighted onscreen feature.  
Press the STATUS/EXIT button on the remote to clear  
the menu from the screen after an adjustment.  
HELPFUL HINT  
If you pass the feature you want, press the MENU button on the  
remote to move back through the MENU one step at a time.  
You can also just wait a few seconds after you finish the  
feature adjustment and the menu will disappear from the  
screen automatically.  
The onscreen menu will time out and disappear from the screen  
when you finish, or you can press the STATUS/EXIT button to  
clear the menu from the screen.  
LANGUAGE  
or our Spanish speaking TV owners an onscreen LANGUAGE  
Foption is present. With the LANGUAGE control you can set the  
TVs onscreen menu to be shown in either English or Spanish.  
Menu  
Picture  
Sound  
Features  
Install  
Menu  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
2
4
Press the MENU button on the remote to show the  
onscreen menu.  
More...  
1
6
1
Press the CURSOR UP or DOWN buttons to scroll  
through the onscreen menu until the word INSTALL is  
highlighted.  
2
Instaler  
Idioma  
Sintonia  
Auto Programa  
Editar Canal  
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
Press the CURSOR RIGHT button to display the  
INSTALL menu features.  
L  
3
5
Español  
English  
3
2
4
Press CURSOR UP or DOWN buttons to scroll the  
Install features until the word LANGUAGE is highlighted.  
4
Press the CURSOR RIGHT button repeatedly to select  
ENGLISH or ESPANOL (Spanish  
5
HELPFUL HINT  
When finished, press the STATUS/EXIT button to  
remove the menu from the TV’s screen.  
Remember, the LANGUAGE control makes only the TV’s  
onscreen MENU items appear in English or Spanish text. It  
does not change the other onscreen text features, such as Closed  
Captioning (CC), with TV shows.  
6
TUNER MODE  
he TUNER MODE control allows you to change the TVs sig-  
Tnal input to either ANTENNA, CABLE or AUTO mode. Its  
important for the TV to know what type of signal to look for.  
(From a Cable TV signal or a normal Antenna signal.) In the  
AUTO mode, when the AUTO PROGRAM feature is activated, the  
TV will automatically choose the correct mode.  
Menu  
Picture  
Sound  
Features  
Install  
Menu  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
2
4
More...  
Press the MENU button on the remote to show the  
6
1
onscreen menu  
1
Press the CURSOR UP or DOWN buttons to scroll  
through the onscreen menu until the word INSTALL is  
highlighted.  
2
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
VOL  
3
5
English  
Antenna  
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
English  
Cable  
2
4
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
Press the CURSOR RIGHT button to display the  
INSTALL menu features.  
English  
Auto  
3
4
5
6
Press CURSOR UP or DOWN buttons to scroll the  
Install features until the words TUNER MODE is high-  
lighted.  
Press the CURSOR RIGHT button to select either  
ANTENNA, CABLE, or AUTO mode.  
HELPFUL HINT  
When finished, press the STATUS/EXIT button to  
remove the onscreen menu from the TV’s screen.  
When CABLE is selected, channels 1–125 are available.  
When ANTENNA is selected, channels 2–69 are available.  
3
HOW TO USE THE INSTALLATION FEATURES  
AUTO PROGRAM  
our TV can automatically set itself for local area (or Cable  
YTV) channels. This makes it easy for you to select only the TV  
stations in your area when the CHANNEL (+), (–) buttons are  
pressed.  
Menu  
Picture  
Sound  
Features  
Install  
Menu  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
2
4
Note: Make sure the antenna or cable signal connection has been  
completed before AUTO PROGRAM is activated.  
More...  
6
1
Press the MENU button on the remote to show the  
onscreen menu.  
1
Press the CURSOR UP or DOWN buttons to scroll  
through the onscreen menu until the word INSTALL is  
highlighted.  
VOL  
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
3
5
Auto Program  
Channel  
2
12  
2
4
Press the CURSOR RIGHT button to display the  
INSTALL menu features.  
3
4
5
Press CURSOR UP or DOWN buttons to scroll the  
Install features until the words AUTO PROGRAM are  
highlighted.  
Press the CURSOR RIGHT button to start the Auto  
Program scanning of channels. Auto Programming will  
store all available channels in the TV’s memory then tune  
to the lowest available channel when done.  
HELPFUL HINT  
After you’ve run Auto Program, check out the results. Press the  
CHANNEL (+) or (–) button and see which channels you can  
select.  
Remember, an antenna or cable TV signal must first be connect-  
ed to your TV (see instructions for making connections on page  
1 of this guide).  
When finished, press the STATUS/EXIT button to  
remove the menu from the TV’s screen.  
6
CHANNEL EDIT  
hannel Edit makes it easy for you to ADD or DELETE chan-  
Cnels from the list of channels stored in the TVs memory.  
Menu  
Picture  
Sound  
Features  
Install  
Menu  
Picture  
Sound  
Features  
Install  
Brightness  
Color  
Picture  
Sharpness  
Tint  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
Press the MENU button on the remote to show the  
2
4
onscreen menu.  
1
9
More...  
Press the CURSOR UP or DOWN buttons to scroll  
through the onscreen menu until the word INSTALL is  
highlighted.  
1
2
3
5
8
Press the CURSOR RIGHT button to display the  
INSTALL menu features.  
VOL  
3
4
5
6
Install  
Language  
Tuner Mode  
Auto Program  
Channel Edit  
Channel Edit  
Program No.  
Skipped  
Program No.  
Skipped  
12  
2
4
7
Press the CURSOR UP or DOWN buttons to scroll the  
Install features until the words CHANNEL EDIT are  
highlighted.  
6
Press the CURSOR RIGHT button to display the  
CHANNEL EDIT options.  
With the CHANNEL EDIT options displayed, and  
PROGRAM NO. highlighted; enter the channel number  
(with the NUMBERED or the CH + or – buttons) you  
Channel Edit  
Program No.  
Skipped  
Channel Edit  
Program No.  
Skipped  
wish to add (Skipped OFF), or delete (Skipped ON) from  
On  
Off  
the TV’s memory.  
Scroll down (using the CURSOR DOWN button) to high-  
light the word SKIPPED.  
7
8
Now use the CURSOR RIGHT button to toggle between  
ON or OFF.  
If ON is selected the channel is skipped when scrolling  
channels with the CH + or – buttons. If OFF is selected  
the channel is not skipped when scrolling channels with the  
CH + or – buttons.  
HELPFUL HINT  
The channels available for you to edit are the ones that the AUTO  
PROGRAM feature found through a search of your TV antenna  
or cable TV signals. Channels not found during the search are  
marked SKIPPED.  
When finished, press the STATUS/EXIT button to  
remove the menu from the TV’s screen.  
9
GLOSSARY OF TERMS  
Auto Programming The procedure of adding or  
QuadraSurf™ The feature that allows the program-  
Twin Lead Wire The more commonly used name for  
the two strand 300 Ohm antenna wire used with many  
indoor and outdoor antenna systems. In many cases this  
type of antenna wire requires an additional adapter (or  
balun) in order to connect to the 75 Ohm Input terminals  
designed into the more recent Televisions and VCRs.  
deleting channel numbers into the Television’s memory  
circuits. In this way the Television “remembers’’ only the nels each.  
locally available or desired channel numbers and skips  
ming of four separate Surf lists holding up to 10 chan-  
Remote Sensor Window A window or opening  
found on the Television control panel through which  
infrared remote control command signals are received.  
over any unwanted channel numbers.  
Coaxial Cable A single solid antenna wire normally  
matched with a metal plug (F-type) end connector that  
screws (or pushes) directly onto a 75 Ohm input found  
on the Television or VCR.  
Tuner Mode Feature control settings made by the TV.  
Designed for first time set up and use. Settings for signal  
connections (antenna or cable TV), plus channel pro-  
gram memory are held in the TV's memory (even if the  
set is unplugged and moved to a new location.)  
Status/Exit Allows the user to quickly confirm what  
channel number is currently being viewed. Status can  
also be used to clear the Television of on screen displays  
or information (rather than waiting for the displays to  
“time out” or automatically disappear from the screen).  
Onscreen Displays (OSD) Refers to the wording or  
messages generated by the television (or VCR) to help  
the user with specific feature controls (color adjustment,  
programming, etc.).  
4

Precisionaire Swissaire Bag Pb1104 User Manual
Ricoh Pro 907ex User Manual
Royal Sovereign Arp 5012xh User Manual
Samsung As18cm2n User Manual
Samsung Avmdh052ca0 User Manual
Sterling Air Conditioner 7200 A User Manual
Sterling Power Products Abrc User Manual
Toshiba Sp802at E User Manual
Toshiba Tec Em1 33046ae User Manual
Zenoah G62 User Manual