Sony Speaker System ZSBTY50 User Manual

Under Industry Canada regulations, this radio  
transmitter may only operate using an antenna  
of a type and maximum (or lesser) gain approved  
for the transmitter by Industry Canada. To reduce  
potential radio interference to other users, the  
antenna type and its gain should be so chosen  
that the equivalent isotropically radiated power  
(e.i.r.p.) is not more than that necessary for  
successful communication.  
Notice for the customers in  
Canada  
Basic Operations  
4-440-743-11(2)  
This device complies with Industry Canada  
licence-exempt RSS standard(s).  
Turn on the Bluetooth device and activate the  
Bluetooth function on your device. For details,  
refer to the instruction manual of your  
Bluetooth device.  
When the Bluetooth function of your device is  
activated, your device will search for pairable  
devices and display a list of detected devices  
on the device display. Select this unit from the  
list. This unit appears as “ZS-BTY50/52/55.”  
Vibration cue is provided  
when the smartphone is  
recognized by the unit.  
To clear the paired device  
information stored in the unit  
Turning off the light sync  
function  
The light sync function of this unit creates  
lighting effects that synchronize with the music  
source. By default, this function is on but you can  
turn it off as desired.  
Operation is subject to the following two  
conditions: (1) this device may not cause  
interference, and (2) this device must accept any  
interference, including interference that may  
cause undesired operation of the device.  
1 Press BLUETOOTH  
Bluetooth function.  
to turn on the  
2 Press FM MONO , DISPLAY  
and  
PERSONAL AUDIO SYSTEM  
Operating Instructions  
TUNE  
at the same time.  
“BT RESET” appears on the display.  
If “ZS-BTY50/52/55” is not displayed, repeat  
the procedure from step 2.  
Power Sources  
Press LIGHT SYNC  
until “LIGHT SYNC OFF”  
appears on the display.  
If a passcode is required  
Some Bluetooth devices may require a 4-digit  
passcode. If your device requires the  
passcode, enter “0000.”  
Using the AC power cord  
3 Press ENTER  
to reset and clear the  
Connect the AC power cord , or insert six R14 (size C) batteries (not supplied) into the battery  
.
compartment  
paired device information.  
When the paired device information is cleared,  
“COMPLETE” appears on the display.  
To cancel this reset operation, press FM MONO  
To turn on the function, press the button again  
until “LIGHT SYNC ON” appears while a music  
source is being output in any function.  
When pairing of the device is completed and  
the Bluetooth connection is established, the  
Bluetooth indicator ( ) stops flashing and “BT  
AUDIO” appears on the display.  
After being recognized by the unit, follow the  
on-screen instructions displayed on the  
smartphone, and complete the procedure for  
Bluetooth connection.  
When the Bluetooth connection is established,  
the Bluetooth indicator ( ) stops flashing and  
the message “BT AUDIO” appears on the  
display.  
, DISPLAY  
pressing ENTER  
and TUNE  
.
again before  
©2012 Sony Corporation Printed in China  
To a wall outlet  
To AC IN  
Listening to music wirelessly  
on a Bluetooth device  
Using the Bluetooth connection, you can listen to  
music from wirelessly connected Bluetooth  
devices such as mobile phones, smartphones,  
music players, etc.  
ZS-BTY50  
AC power cord  
(supplied)  
Listening to the radio  
If you want to pair with another Bluetooth  
device, repeat steps 1 to 3.  
1 Press FM  
or AM  
to select the band.  
2 Press and hold TUNE + or   
until the  
Tip  
WARNING  
If pairing and the Bluetooth connection fail, do the  
following.  
Notes on pairing with a Bluetooth device  
frequency digits begin to change on the  
display.  
If you turn off the unit or power off the Bluetooth  
device before the Bluetooth connection is  
established, pairing information will not be stored,  
and pairing will not be completed.  
Pairing mode is canceled after about 5 minutes. If  
pairing mode is canceled halfway, start over from  
step 2.  
The operation and display may differ depending  
on the Bluetooth device or the version of  
Bluetooth software installed.  
“Passcode” may be called “Passkey,” “PIN code,”  
“PIN number” or “Password,” etc., depending on  
the Bluetooth device. For details on the passcode,  
refer to the instruction manual of your device.  
This unit supports non-NFC compatible  
Bluetooth devices (hereafter “Bluetooth  
device(s)”) and NFC-compatible smartphones.  
Relaunch “NFC Easy Connect” and move the  
To reduce the risk of fire or electric shock, do  
not expose this apparatus to rain or moisture.  
.
The following FCC/IC  
smartphone slowly over the N-marked part  
Remove the case from the smartphone if  
using a commercially available smartphone  
case.  
statement applies only to the  
version of this model  
manufactured for sale in the  
U.S.A. and Canada. Other  
versions may not comply with  
FCC/IC technical regulations.  
To reduce the risk of fire or electric shock, do not  
expose this apparatus to dripping or splashing,  
and do not place objects filled with liquids, such  
as vases, on the apparatus.  
To listen to audio  
Keep the Bluetooth device (or NFC-compatible  
The unit automatically scans the radio  
frequencies and stops when it finds a clear  
station.  
As the main plug is used to disconnect the unit  
from the mains, connect the unit to an easily  
accessible AC outlet. Should you notice an  
abnormality in the unit, disconnect the main plug  
from the AC outlet immediately.  
Notes  
smartphone) and the unit within 10 meters  
Replace the batteries when the OPR/BATT indicator  
dims, or when the unit becomes inoperable. Replace all  
3
(393 / ) of each other, and check the  
4 in  
If you cannot tune to a station using the  
automatic tuning mode, press TUNE + or   
the batteries with new ones. Before you replace the batteries, be sure to disconnect any optional component  
from the unit.  
following before operation.  
The Bluetooth function of the device is  
activated.  
repeatedly to change the frequency step by  
step.  
To use the unit on batteries, disconnect the AC power cord from the unit and the wall outlet.  
NOTE:  
The unit is not disconnected from the AC power  
source (mains) as long as it is connected to the  
wall outlet, even if the unit itself has been turned  
off.  
Pairing and the Bluetooth connection are  
completed correctly. If not, perform the pairing  
procedure beforehand. (See “To pair with a  
When an FM stereo broadcast is received, “ST”  
lights up on the display.  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation.  
To connect with a smartphone by one  
touch (NFC)  
By touching the unit with an NFC-compatible  
smartphone, the unit is turned on automatically,  
and then proceeds to complete pairing and the  
Bluetooth connection automatically.  
Compatible Bluetooth devices  
Location of Controls  
Tip  
If the stereo FM reception is noisy, press FM MONO  
until “MONO” appears on the display. You will  
lose the stereo effect, but the broadcast will  
improve.  
Compatibility requirements for the devices are as  
follows. Before using with this unit, check that  
your device meets the requirements.  
Do not install the appliance in a confined space,  
such as a bookcase or built-in cabinet.  
* /ENTER  
has a  
ĄFor a Bluetooth device  
This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and  
used in accordance with the instructions, may  
cause harmful interference to radio  
communications. However, there is no guarantee  
that interference will not occur in a particular  
installation. If this equipment does cause  
harmful interference to radio or television  
reception, which can be determined by turning  
the equipment off and on, the user is  
Devices must conform to Bluetooth  
Standard version 3.0.  
Excessive sound pressure from earphones and  
headphones can cause hearing loss.  
tactile dot.  
1 Press BLUETOOTH  
Bluetooth function.  
to turn on the  
Compatible smartphones  
Smartphones with a built-in NFC function  
(OS: Android 2.3.3 or later, excluding Android 3.x)  
Devices must support A2DP (Advanced  
Audio Distribution Profile) and AVRCP  
(Audio/Video Remote Control Profile).  
Do not expose the batteries (battery pack or  
batteries installed) to excessive heat such as  
sunshine, fire or the like for a long time.  
The last connected device will be connected  
automatically.  
NFC capability (required only when using  
the NFC pairing function of the unit).  
2 Start playback of an audio source such as  
music, videos, games, etc., on the device.  
Refer to the instruction manual of your device  
for details on playback operations.  
The nameplate is located on the bottom exterior.  
What is “NFC”?  
To improve radio reception  
For the latest information on compatible  
Bluetooth devices, including NFC-compatible  
smartphones, check the website below.  
Owner’s Record  
NFC (Near Field Communication) is a technology  
enabling short-range wireless communication  
between various devices, such as mobile phones  
and IC tags. Thanks to the NFC function, data  
communication can be achieved easily just by  
touching the designated touchpoint on the  
NFC-compatible devices.  
Reorient the antenna to improve FM reception.  
The model and serial numbers are located on the  
bottom of the unit. Record these numbers in the  
space provided below. Refer to them whenever  
you call upon your Sony dealer regarding this  
product.  
encouraged to try to correct the interference by  
one or more of the following measures:  
For customers in the U.S.A.:  
ĄFor an NFC-compatible smartphone  
Start playback of an audio source such as music,  
videos, games, etc., on the smartphone.  
Refer to the instruction manual of your  
Reorient or relocate the receiving antenna.  
Increase the separation between the  
equipment and receiver.  
For customers in Canada:  
(English)  
(French)  
Connect the equipment into an outlet on a  
circuit different from that to which the  
receiver is connected.  
Consult the dealer or an experienced radio/  
TV technician for help.  
smartphone for details on playback operations.  
1 Download and install the app “NFC Easy  
Connect.”  
Model No. ZS-BTY50  
Serial No.  
Note  
“NFC Easy Connect” is a free app for Android  
smartphones that can be obtained on Google  
Play. Search for the app using the keyword  
“NFC Easy Connect” on the site, or access the  
download site directly by reading the  
two-dimensional code below.  
Note that “NFC Easy Connect” is free but data  
communication fees when downloading are  
charged separately.  
The Bluetooth function turns off when:  
Important Safety Instructions  
1) Read these instructions.  
you press POWER  
to turn off the unit.  
Pairing  
you switch to a function other than Bluetooth  
function.  
Bluetooth devices must be “paired” with each  
other beforehand. Once Bluetooth devices are  
paired, there is no need for pairing again, unless  
pairing information is cleared. With this unit, up  
to 9 Bluetooth devices can be paired.  
If your device is an NFC-compatible smartphone,  
the manual pairing procedure is not necessary.  
Use the smartphone with this unit along with the  
procedures described under “To connect with a  
2) Keep these instructions.  
3) Heed all warnings.  
CAUTION  
Tip  
You are cautioned that any changes or  
modifications not expressly approved in this  
manual could void your authority to operate this  
equipment.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install  
in accordance with the manufacturer’s  
instructions.  
8) Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
9) Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your  
safety. If the provided plug does not fit into  
your outlet, consult an electrician for  
replacement of the obsolete outlet.  
10) Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit  
from the apparatus.  
If the volume level is low, adjust the volume of the  
unit first. If the volume level is still too low, adjust  
the volume level on the connected Bluetooth device  
or the smartphone.  
Illumination  
The illumination on the handle has the  
following two features.  
Reorient the unit itself to improve AM  
reception.  
This equipment must not be co-located or  
operated in conjunction with any other antenna  
or transmitter.  
)
Indication of function change (  
Tip for the Bluetooth devices  
If the last connected device does not connect  
automatically, reselect the Bluetooth function by  
When you switch to one of four functions, the  
illumination increases in intensity to notify  
the user of function change. The illumination  
is blue for Bluetooth and white for other  
functions.  
Two-dimensional code* for direct access  
* Use a two-dimensional code reader app.  
pressing BLUETOOTH  
after POWER , FM , AM  
This equipment complies with FCC/IC radiation  
exposure limits set forth for an uncontrolled  
environment and meets the FCC radio frequency  
(RF) Exposure Guidelines in Supplement C to  
OET65 and RSS-102 of the IC radio frequency (RF)  
Exposure rules.  
This equipment has very low levels of RF energy  
that it deemed to comply without maximum  
permissive exposure evaluation (MPE). But it is  
desirable that it should be installed and operated  
keeping the radiator at least 20 cm or more away  
from person’s body (excluding extremities:  
hands, wrists, feet and ankles).  
When using the Bluetooth function, pay  
attention to the Bluetooth status indicator ( ) on  
the display, which tells you the network status  
between the unit and your device.  
or AUDIO IN  
is pressed. If it still does not  
connect, select the model name of this unit from the  
device list (perform step 3 in “To pair with a  
)
Lighting effects for audio output (  
Lighting effects, in red, are created that  
synchronize with the music source. You can  
turn this function on or off as desired (See  
Indications for the Bluetooth function  
Status  
To terminate a Bluetooth connection  
You can terminate the Bluetooth connection  
using any of the following operations.  
Bluetooth indicator (  
)
Bluetooth  
connection is  
off  
Off  
ĄFor a Bluetooth device  
To adjust the volume  
Note  
Turn off the unit.  
Turn off the device.  
Before Using the Unit  
Turn VOLUME control  
clockwise (+) or counter  
The App may not be available in some countries  
and/or regions.  
Pairing or  
Flashes  
clockwise ().  
communicating  
The volume level of this unit is adjustable in  
steps from 0 to 31. For the 31st step, “VOL MAX” is  
displayed.  
Press POWER , FM , AM  
or AUDIO IN  
.
To turn the power on or off  
Connection is  
established  
Constantly on  
This symbol is intended to alert  
the user to the presence of  
uninsulated “dangerous voltage”  
within the product’s enclosure  
that may be of sufficient  
2 Start the app “NFC Easy Connect” on the  
smartphone.  
Make sure that the application screen is  
displayed.  
Disable the Bluetooth function on the device.  
Press POWER . You can also turn on the power  
11) Only use attachments/accessories specified  
by the manufacturer.  
12) Use only with the cart, stand, tripod,  
bracket, or table specified by the  
of this unit using the direct power-on function  
(below).  
In this manual, operations are mainly explained  
using the direct power-on function.  
ĄFor an NFC-compatible smartphone  
To listen through headphones  
Touch the smartphone to the N-marked part  
again.  
To pair with a Bluetooth device  
Connect headphones to the (headphones) jack  
Keep the Bluetooth device and the unit within 1  
3
3 Touch the smartphone to the N-marked  
part  
vibrates.  
magnitude to constitute a risk of  
electric shock to persons.  
.
manufacturer, or sold with the  
apparatus. When a cart is used, use  
caution when moving the cart/  
apparatus combination to avoid  
injury from tip-over.  
meter (39 / in) of each other for this operation.  
Turn off the unit.  
Turn off the device.  
8
of the unit until the smartphone  
To use the direct power-on function  
Press BLUETOOTH , FM , AM  
1 Press BLUETOOTH  
Bluetooth function.  
2 Press and hold BLUETOOTH PAIRING  
to turn on the  
To reinforce the bass  
This symbol is intended to alert  
the user to the presence of  
important operating and  
maintenance (servicing)  
instructions in the literature  
accompanying the appliance.  
.
Press POWER , FM , AM  
or AUDIO IN  
or AUDIO IN  
.
Press MEGA BASS  
while the unit is turned off. The power turns  
on directly in the selected function.  
Disable the Bluetooth function on the  
smartphone.  
“MEGA BASS” lights up on the display.  
To return to normal sound, press the button  
again.  
13) Unplug this apparatus during lightning  
storms or when unused for long periods of  
time.  
to activate the pairing mode of the unit.  
When pairing mode is activated, a  
double-beep will sound and the Bluetooth  
indicator ( ) will flash on the display.  
If activation fails, press and hold BLUETOOTH  
14) Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way,  
such as power-supply cord or plug is  
damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
This graphical symbol is located on the bottom  
of the unit.  
PAIRING  
again, and try to activate the  
pairing mode again.  
To cancel the pairing mode after activation,  
press BLUETOOTH PAIRING  
seconds.  
at least 2  
3 Perform the pairing procedure on the  
Bluetooth device.  
 
       

Soehnle Microscope Magnifier 3011 User Manual
Sony All in One Printer DPPSV55 User Manual
Sony Cell Phone 1266 1565 User Manual
Sony Mouse PEGA KB20 User Manual
Sony Music Mixer 267 User Manual
Sterling Air Compressor SSV 05 User Manual
Sterling Plumbing Outdoor Shower 1500D User Manual
Sun Microsystems Network Card X4100 M2 User Manual
Sylvania Flat Panel Television LC320SSX User Manual
Talkswitch Two Way Radio TS 100 User Manual